🌎 Miele Dishwasher - DRAIN WON’T STOP (FIXED) 😃
Вставка
- Опубліковано 29 вер 2024
- 🌎 Miele Dishwasher - DRAIN WON’T STOP (FIXED) 😃
This Video shows how to Easily Fix your Miele Dishwasher that keeps draining every time its on.
The drip tray below the dishwasher got flooded due to the one-way valve being stuck open. Just takes a screwdriver and a few minutes to unstick the valve.
QUICK AND EASY APPLIANCE DIY REPAIR VIDEOS - SAVE BIG $$$ BY FIXING IT YOURSELF✅
✨ If the video was helpful, remember to give it a Thumbs Up 👍 and consider Subscribing. New videos every Saturday ✨
-Subscribe Here: / @scottthefixitguychannel
🛠- Do You Need Any Additional Help? Become A Member of Our Channel Today and Get LIVE HELP from Scott With Your Appliance Repair. Pick #1 FIX-IT FAN for Just $4.99 and get Text, Zoom, Email or FaceTime Live Help. Non-Members pay $45.00 for Live Help. Just $4.99 for Channel Members. Click Here to Join Today: / @scottthefixitguychannel
-Facebook: / scottthefixitguy
-Twitter: / scottthefixitgy
-Instagram: / scottthefixitguy
-UA-cam Channel: / scottthefixitguychannel
-If My Advice Has Helped You…
Please Click Here To Donate: www.paypal.com...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
-GREAT PLACE TO ORDER O.E.M. Genuine Parts for Your Appliance - Click Here: fix.pxf.io/MmrxYY
-Need Expert Appliance Repair Help Today? Click Here:asqme.com/@sco...
-Good Place to Buy Parts: bit.ly/3wD4L5W
-List of Tools used by Scottthefixitguy: • ✨ Scott The Fix-It Guy...
-Need More Expert Help with Your Repair? Click Here To Schedule a 15 Minute Meeting with Me Using Zoom 💻 : calendly.com/s...
Disclaimer:
Because factors beyond the control of Scottthefixitguy, I cannot guarantee against improper use or unauthorized modifications of this information. Scottthefixitguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Scottthefixitguy recommends safe practices when working on appliances and vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Scottthefixitguy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Scottthefixitguy.
Thank you 😊
Article I Wrote on Fixing a Dishwasher that Won’t Drain: www.familyhand... *
*
🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens *
*
Click Here To Order A Miele Dishwasher Original Manufacturer FILL VALVE: luwaluxury.com... Waterproof System for G800, G1000 and G2000 series
Click Here To Order A Miele Non-Return Valve For Your Miele Dishwasher: luwaluxury.com... Non-Return Valve, G2000, G4000 and G5000 Series
Click Here To Order Miele Dishwasher Cleaner and Conditioner: luwaluxury.com... Dishwasher Conditioner
Click Here To Order A New Miele Dishwasher Drain Hose: luwaluxury.com... Drain Hose for G2000, G4000, G5000 series ***
***
Scott The Fix-It Guy - Appliance Repair Videos Do you need More Appliance Repair Direct Help from Me? Visit me at:AsqMe.com@ScottTheFixItGu and I'll help you get your appliance working again quickly.
I had tried the first two solutions until I saw this video. The leak was my problem. I tilted my dish washer because replacing the part looks too difficult. Thanks for uploading this (ages ago).
Nicely done 👍
Thank you, it was very useful video!
Huge thanks!
Tried everything until I stambled on your video and for me it was the dripping tray on the bottom, when water comes in it leaks, dont know how I will fix that but until then I can just spogne out the water.
Major thanks for the video, you are the best!
Glad it helped!😊
It might have dirty sink water flowing backwards down through the drain line and flooding your Miele👍💻 New Appliance Repair Blog - lots of DIY Fixes for Your Home Appliances - Click Here:
ApplianceFixes4You.com
my zanussi dishwasher keeps activating the anti flood device on start up .. and displays error code 4.0
+kambo E zzat
Hi Kambo,
Just need to sponge out all the water in the lower tray.
ua-cam.com/video/5_-TJZKKX5c/v-deo.html
The same exact problem happened with me. Except I tried everything and the tray and float switch were bone dry and perfectly fine. What had happened was that the controller board had somehow burned out the plug to my drain motor which caused it to drain incessantly and gave me the waterproof error. I spliced and replaced the plug and same thing. The board immediately went to work burning that plug again. Miele freaking wanted $800 for a new board and $200 for the harness and $200 for labor.
Don’t buy a Miele. They charge +70% and claim it lasts twice as long. Complete nonsense. Miele blamed me for misuse. How on earth do I burn out a controller board???
I tossed it and bought an LG.
8:02 Scott, do you have a video for if the valve is leaking? Followed all your steps and got my dishwasher working but then the bottom fills with water again and the pump keeps trying to run. I’m going to assume it’s the valve you mention at 8 minutes.
Thanks Michael, does it look like the dishwasher fills up with water even when it’s off?
@@ScottTheFixItGuyChannel No. I would say, after every 3-4 runs of the dishwasher, I have to turn off electric and soak up the water in the drip pan.
Hi Michael,
I think you have a leaking partition seal on the circulation pump.
You can order a new partition kit for your pump by calling Miele USA.
Thank you very much. Had a repair company come out for my Miele Dishwasher and the repair quote with replacing parts was $375 for the F70 Code. I watched your video and it was a simple piece of broken glass that was clogging the ball bearing. I cleared the blockage and the machine has been running perfect since. Thank you.
That is awesome news Matthew😊😊😊
Mine is the other way around. Program is run as it should. Water is pumped out properly, but after 4-5 days water seeping back again into the diahwasher. I’ve replaced the non return valve (15 years old), but the problem still exists. Should I also replace the square part as well (sump?)?
Just need a new fill valve. Yours is letting a little water leak in.
I'll always kill myself to try to fix things, just because I have a knack for it and also because I have to keep up the (not very true...) impression that my family have of me that"...he's an all-round clever dick at fixing things".
So, I opened my Miele G5220sci, exposed the impeller, examined the non-return valve and found the metal valve-ball was held open by some little plastic bit of junk. Put all that back together, exposed the driptray and saw that the polystyrene float was sitting on a puddle and had tripped the microswitch. I soaked off all the water and then ran a couple of cycles and - bingo! problem solved. Many thanks, Gilbert
Wow,
Nice job Gilbert😊
Hi Scott the fixit guy. I have done three of the possible fixes I learned from you watching your videos but the Intake/Drain blinking light keeps coming back on. I replaced the water inlet valve per your instructions and checked the one way valve in the sump for debris. I also checked the drain line to make sure it is above the disposal connection. Ours is a Miele 2003 G 892-SC Touchtronic. Maybe it's just time for a new machine? I have not taken the machine out from under the counter, turned it on its side and removed the circulation pump.
Any thoughts would be appreciated.
Thanks Mark,
Can you check this manual for the diagnostic tests? f01.justanswer.com/smitty1486/b4cbc5bd-5d71-41a1-915d-6756edc3bc8a_G600+%26+800+Miele+Service+Manual.pdf
This was EXACTLY my issue! Who would’ve thought a 7-year old video would come to my rescue. Thanks Scott!!
I love it.
Thanks Evan👍
I should have added, the rinse cycle and light will not go off. It's continually rinsing. Thanks again
Thanks Mark,
I think you have water in the tray below the dishwasher.
Just need to unplug it, remove the panel below the door and then remove the panel below that and sponge out all the water.
Hello , how did u take the rubber seal around 8:00 in your video out? i do have a leakage problem, i think this is the root cause
This is the most helpful thing I have found on the internet when it comes to fixing my dishwasher. Here's hoping I can get it going. Thank you!
Thanks so much Spencer
Update:
This absolutely helped me to finally fix my issue. Very excited and relieved. Thanks again!
Thanks Scott! this video helped me solve one time of the problem by removing all the water from the bottom tray, i am wondering if there is any video for the replacement of the rubber seal part as you mentioned in the middle and end of this video. my root cause might be this part as every time i run the dishwasher, there are small amount of water remaining. couple of weeks later, the bottom tray start flooding again. thanks again for the help!
I’ll send you one.
The part is called a partition kit.
@@ScottTheFixItGuyChannel thanks for the name of the part. couldn't find a Canada retailer for this part for a reasonable price as I live in Ontario. i am also trying to figure out what's guide/video for replacing the partition kit? Thanks again for the quick reply!
Awesome! Clearly explained what the owner's guide couldn't
Thank you👍
They do it deliberately so you have to call their repair people!
Dude is that a Rolex? Are you fixing a dishwasher with a Rolex on?
It’s my daily wear Submariner. Super tough reliable watch👍
@@ScottTheFixItGuyChannel Well, yeah, is reliable.
On the other hand, I took my 10 dollar F-91W Casio so I wouldn't risk scratching it.
That's some confidence you got there, shows who's the pro and who's just hopping not to mess up ;)
BTW, thanks for the video, you're content's awesome!
Fantastic video, thank you!! I literally loved everything about your video- from the information to your voice. I haven't even checked yet but I hope you have an epic channelWith loads of videos because I look forward to watching and learning from more of your productions. Gratitude!
Worked for my Miele. We had a slow draining kitchen sink which backed up. When running the garbage disposal water began to back up into the dishwasher. Cleared the drain but now dishwasher is not working. But after watching your video, it was water in the bottom tray that was the problem. Soaked it up with a sponge as you recommended and now it's working fine. Thank you!
Thank you
This was the bomb, fixed mine in 30 minutes. It was the drain pan. I had turned off the water to my home, when turned it back on, drain stayed on. Water was in that lower pan.
I did 2 things different than this fellow. I used a micro fiber towel, not a sponge… I was able to stuff it way under in that area. Also I removed to cosmetic front door panel, made everything else easy peasy.
Nice job Steve😊👍
Many thanks for this great video!!! I had the same problem with the pump working continuously. I used the sponge to get the water out from the tray, as shown in your video. Water got there through one of the tubes draining the door seal and that's where the leak was. I have cleaned the door seal properly and all is working perfect now. Big thank you for a great money saving video. Best Regards. Luke.
Do you have a video for a Miele Diamante dishwasher that won't turn off, buttons unresponsive and started on its own with no one near it to push any buttons by accident. Tried to plug and unplug, but it just picks up where it left off, door open or closed When I open, a little "fountain" is percolating in the location of where the pump would be.
Very good
You realy saved me! With a sponge and a screwdriver I've fixed the dishwasher în 5mins after one week of waiting for a "specialist" ... Big Thank You!
Isn’t that a great feeling?😊
Thank you for this, been trying to sort my dishwasher for two days, fixed it within two minutes after watching your video
Super helpful video! Thanks for making it and sharing your knowledge!
You are very welcome 😊😊😊
Excellent video. clear detailed instructions. very helpful. thank you.
Why in the world do manufacturers put screws in such hard to get places??? Yikes. But, the instructions to get to and empty the drain pan worked, so you are fantastic!
Well done helped solve problem
Thank’s So Much David, I’m so glad it worked and saved you time and money😊 I hope you’ll click here to support us by joining our Channel: ua-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.htmljoin
You’ll get Live Appliance help when ever you need it.
It’s just $5.00
Thanks Scott for taking the time to make these very helpful videos. I was thinking my dishwasher was at the end of it’s life. I tipped it forward and it runs again. Still might have an intake valve leak, but at least I am now aware of what tit might be.
Thanks Scott, for a clear, exhaustive explanation. After lengthy hours browsing through forums and Quora questions I finally found a solution to my problem! Have a great day
I love it😊
You totally helped me fix my problem, it was the water-in-the-pan thing. If it happens again soon, I know know about the spare part. Thanks so much!!!
Great to hear!😊
Thank you soooooo much sir! Saved $200 on this!
Excellent, thank you👍
We had a more recent Miele G6365 that starting pumping without any controls being pushed. There was little water in the sump. The pullout filter was not clean, but it was also not needing cleaning, in my opinion. The display mentioned "water proof." After seeing this video, I found a grape stem fragment in that ball valve that prevented the ball from seating on the rubber base. Case solved!!! (The manual just said to contact Miele for this error). I was glad to fix this the night before Thanksgiving. You saved me a service call. Your videos are great.
Thanks! LG dishwasher, flooded pan. Dried it up and the error went away and it's functioning like normal now.
Awesome,
Thank you
Hi Scott
You nailed it!
Unfortunately your video didn't come up first on my search and i had to go through two other videos which took a couple of hours to prove that they were irrelevant.
Much appreciated
Glad it was helpful!😊😊😊
Thanks for your prompt reply Scott. I should have mentioned that I did remove that panel and there was no water present. Maybe it's time for a new machine? This one is almost 20 years old. I do like the idea of repairing and reusing but maybe the fix is more than I can handle. Thanks
Thanks Mark, can you send a video of what it’s doing to scottthefixitguy@yahoo.com
Thanks David. Great Vid , keep up the good job.
A huge thank you for this! (I'll be sending a donation.) I was able to disassemble, clean and solve several of these problems before my partner got home to move the machine so we could unplug it to drain the pan. (I'm 63, not much strength or flexibility anymore). We'll be relocting the electrical outlet. Our problem came after a major sink clog that backed up into the dishwasher when we plunged it (lesson learned). And yes! we didn't have the right config for the disposal hose. I fixed it with a brace to the wall. Interestingly, the One Way Drain Valve had a pressure crack in the top of it, exactly where the clip holds it in place. Small, but enough to cause a geyser-like leak. We'll remedy it with some glue while we wait for the new part to arrive. We have a 21ish year old Platinum G SUA 892. Up til now our only real problem has been the deteriorating racks, which I'm about to replace now that I feel confident this machine will keep working, and/or we can fix what ails it. Thank you again!
Very impressive 😊😊😊 You might try calling Miele USA for the parts.
Good video very informative and i want to add something, if tray is filling up doesn't it mean something is leaking and tray will contonue filling in the future and same problem with happen? Need to see why water filled up on bottom of dish wadsher/tray and fix other way rust will ruin dishwasher and will end up doing this sponge routine again and again. Good video thanks for that.
Hi Remi,
I would suspect you have a fill valve that is not closing all the way and letting water leak in.
It could also be water flowing back from a clog sink through the drain pipe back into the dishwasher.
Just saved myself $2,000! Thanks mate!!
I had similar issue and I managed to fix my Siemens dishwasher without taking the dishwasher out. Thank you very much! But I have to admin that Miele seams to have much better access then Siemens :p
That’s true 👍
Thanks Mate! Followed your instructions, fixed the problem, and saved myself lots of money!
You're welcome!
Thank you very much Scott! Same problem, different Miele DW Model but the walk-through was enough to recognize the issues and solve them thanks to you! As in your Video, I had two of the similar problems, Water in the bottom pan (forcing Styrofoam float up) and the back water steel ball gasket wasn't seated correctly to stop the standing water. You Sir, get a very long Slow Clap!! Thanks.
GOD BLESS YOU!!!!
You are most welcome😊😊😊
Thank you SO much! You explained very good and simply, we did all the stages and the problem was solved! Saved a lot of money, frustration and time!
Hello! I have a question about my Miele dishwasher. When I turn it on to run a cycle it starts running and I hear the draining. After that there is just a motor sound and the intake/drain light starts flashing. Any ideas or thoughts?
Hi Griffin,
Can you contact me at scottthefixitguy@yahoo.com and send me a video of what you noticed?
Thanks mate! I had to soak up the tray underneath. Worked a wonder
Very helpful, thanks for including the Bosch brand. Also, thanks for the long term preventative tip. Very detailed and straight forward lesson. I like that you explained the whole system to, to make sense of the problem.
+Paul Mc Alpin
Thanks so much Paul
Thank you so much Scott. Had a sink plug and tried to plunge (needed snake as completely plugged off) and realized water was pushed into dishwasher. Yes, dishwasher stuck in drain mode. Your video solved my issue in 1/2 hour and saved my marriage. Cheers!
Thanks so much Andrew, you’re the Man👍
Thanks soooo much for your helpful video! Solved the problem of my Miele G651SC.
Just fixed my IKEA dishwasher with the same method of removing the front plate and mopping up about a jugs worth of water.
Then blasted it with a hair dryer for good measure.
Thank you!!!
Nice job Tom👍
Not fixed
Great Question Nick👍 Click Here to Get Live Expert Help From Me For Just $5.00: ua-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.htmljoin
We’ll Get It Fixed 👍
Thanks very much. I have a Zanussi model which also has a float in the lower tray. I was getting the problem where the motor kept pumping even though the main sump was empty. On opening the front panel I also found a layer of water in the lower tray which was causing the micro switch to trigger. Once I soaked up the small amount of water using a cloth the problem was fixed. I was almost at the point of purchasing a new machine so many thanks for the video as it solved my problem.
+Bernard Mills
Thanks Bernard, thank you
Thank you
You’re welcome😊
Thanks Scott, you are a lifesaver. Been battling with our dishwasher for some time now, sometimes it worked, sometimes it did not. The 'water under the machine' was the problem here. Fixing the pump now.
Awesome news, thank you👍
Dude! Love you!!! Thank you so much for the solve. Mine was water underneath causing the float to rise. Sponged it out and running again. Will monitor for leaking but might be due to not cleaning out the strainer, it was very full of debris. Thanks again!!!
You are most welcome😊
Nice job!
In the spirit of being thorough I found the problem to be with the screw that secures the top frame of the dishwasher to the cabinets. It came loose and backed-out enough so the head was preventing the dishwasher door from completely closing to create a good seal. A small amount of water was leaking down the seam onto the floor and into the lower section behind the kickplate which was causing the float to continually run the drain cycle. Thanks again for your videos!
Great video. Just fixed my BEKO5830 with your help. Thanks
Excellent 😊😊😊
Thank you. My water discharge line from dishwasher into the disposer was incorrectly installed. I also found something in the dishwasher impeller. The pan also needed to be drained to deactivate the float valve. Your video was critical to watch.
Nice job Todd👍
@@ScottTheFixItGuyChannel Thank you!
Great job, keep making videos. :)
Man you just saved me from a new one . Had no idea mine had a drain pan with a water level switch
Nice job😊👍
Thanks!
Thank you😊
works on gorenje f54 error. Thank you
Thank you ! This clear helpful video saved us a load of grief. As the guys were watching your video, I was looking for the warranty and wondering how much a new dishwasher will cost. This clear explanation fixed the problem - a piece of broken glass had become wedged exactly as you showed. YOUR TODAY's HERO -- THANKS.
Thanks so much Sandra,
I’m so glad it worked 👍
Great thanks. Managed to repair our NEFF by watching this.
This is the first video I've come across that explains every possible issue that's causing this! Going to try these right now 😊
Thank you,
Please tell us how it goes👍
@@ScottTheFixItGuyChannel Mine was as simple as the bottom tray being full of water, and tilting it back. At least my filters are now clean too 😂
Very cool👍
Thanks for showing how to take that sump out. I read my Miele instruction manual but it wouldn't budge. I was worried about using any force but all it needed was a screwdriver to give it a little push.
Excellent ,
Thank you
Thank you your video was a lot of help
And Scotthefixitguy comes yet again to the rescue. Our G 841 SC Plus had a small piece of the edge of a milk glass plate that OCCASIONALLY made the impeller stuck, triggering the intake/drain light. The motor hummed, and only after spinning the impeller in both directions was I able to isolate when it actually stuck again. That's when I saw the glass chip and removed it. How it got past the other screens, I don't know as they contained other broken glass and assorted other trash. Perhaps it slipped in as I removed the sump screen previously and it somehow teetered in that way. Bottom line - it now works flawlessly. Watching the above video, I was able to figure out how to remove it. In a previous Scottthefixitguy video, I was able to modify a cheap metal fork to unfreeze a circulation pump impeller. Thanks yet again, Scott!
Thanks so much Larry👍
Thank you...saved me a call to the repair guy
That’s what I like to hear😊
Once any wash cycle is chosen (on my Miele Incognito), and door closed, drain starts and does not stop. The metal ball in the check valve is clear and no water in the pan. Pulled dishwasher out to try to see if there's a stuck float but can't find it.
+Buykai
I just fixed one yesterday .
I pulled it out and removed the bottom plate and removed the styrofoam float from inside its plastic case and found the microswitch stuck. I flipped the float upside down and put it back together . That fixed it.
Scott, This is what happened to mine and your post was the answer! I ran it with dishwashing soap because we ran out of dishwasher pods and it bubbled like crazy and even overflowed the drip pan onto the floor. I removed the kick plate to access the pan, but my Fridigaire Gallery (FGID 2472QF) wasn't as easy as yours was and I had to pull it out a bit and sneak my hand in at the corners. By letting the sponge soak up water multiple times, I removed a small mixing bowl full and the styrofoam float switch disengaged, letting it run again. BTW, before this, the way to reset the (unresponsive ) machine is to press the heat and power buttons at the same time for 10 sec. or so. Unfortunately, the water level was too high to let that work. Now if only I could fix our dead Saab!
Nice work👍🔧⚙️
Thanks Scott. Learned enough to get it resolved. Cheers
Nice Job😊
Scottthefixitguy strikes again! With his help, I've fixed so many appliances - including taking SEEMINGLY complex internal components apart - that I've even fixed my friends' appliances. This morning my 16 year old Miele dishwasher stopped draining. After watching a few of Scott's related videos, I discovered the problem was an easy fix - the one-way sump valve (the one with the ball bearing) was clogged with food and limescale. The whole operation took 5 minutes - beginning to end. Getting a Miele approved (hopefully, COVID vaccinated) repair person over would have cost a minimum of $200. So, everyone, check @scottthefixitguy's videos first, then try fixing it yourself. You'll be pleasantly surprised about what YOU CAN DO YOURSELF.
You’re the Best Cameron😊😊😊
You Made My Day Cameron😊😊😊😊 I Hope That You Can Become A Member of Our Channel😊👍
Here’s a Membership Link: ua-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.htmljoin
Thanks again. Very informative
we almost bought a new machine because of this problem but your video helped us fix it and saved us about 1000dollars , thanks!
That is super cool 👍
Many thanks, very useful video.
Thank you
Hi Scot - this was a very useful video. Many thanks. You also show a rubber seal that may be torn that requires a little more work but isn't too bad to replace - do you have a video to do this?
Thanks so much you guys,
Can you go to scottthefixitguy channel and click the Please Donate button for a Paypal donation of $20.00.
Your donation helps me make more videos.
That bottom seal is pretty hard to replace and very rarely leaks.
Thanks again,
Scott
HI Scott, Thanks! This really sorted out my dishwasher - flooded tray, cleaned up and working perfectly. Just watching for leaks now.Thanks again, Sean
Nice job Sean,
The flooding may be occurring due to the drain hose being connected directly to the garbage disposer and when the sink fills up with water, that water flows backward and floods the lower tray of the dishwasher.
Awesome video. Pedagogical and down to earth. Saved me a lot of frustration =)
Thanks so much😊😊😊
A clear and concise explanation of a troublesome problem, return of water from sink waste trouble me for months, then woke up this morning to dishwasher going into auto pilot with the scavenging pump flat out all night. Having spent my entire career on four stroke and two stroke engines, I felt an engineer may be needed. Then goggled the condition and came upon you video, can't thank you enough for a detailed and concise explanation, covering not just the repair but prevention measures thrown in too.
You are most welcome 😊
Thank you! The food particle in the sump tip did it! Working like a champ. Mine was a 2017 Samsung dishwasher and it just kept trying to drain and nothing else would work. Fortunately, yours was the first vid that came up and solved my problem easy peasy. Thanks!
Thank you😀
For my Bosch, the fixes didn't work, but the reason did. So I used the low tech method of tilting the washer forward to drain it. And it worked!!
Very good Michael
Thank you, man! It helped us indeed.
+Валентина З.
Excellent,
Thank you
Thank you so much you saved us a load of money!!! We had exactly the same problem and with your guide it was fixed in no time ! thx great vid
+Max speiser
Excellent ,
Thanks Max
+Max speiser
Thanks Max👍
Thank you so much !!!! You’re great 😊
You are great too😊😊😊
Legend - we thought our 16 year old Miele had finally given up the ghost but all it was was water in the pan. Thanks for the great instructions and for saving us a fortune!
Awesome,
Thanks so much Damo👍
Totally and absolutely brilliant fix Scot. Hope the $20 helps you keep up the excellent work mate. I would never have imagined our Miele had a drip tray and micro switch - triggered by a failed sewer pump rather than garbage disposer. Thank you. Didjryan
+David Ryan
Thanks so much David😀
thanks so much. Some of the other videos have you pulling out the whole unit before attempting the simple fix. Thanks again.
Thanks Rob😊
Many thanks. Thank you for you efford
Scotty, well done, you saved me having to buy a new machine. Good luck and every success in all you do buddy.
Thanks so much Andy👍
Sorry the error is F 70
Thank you mate.
You're welcome!😊
Thank you. Perfect fix. Although I have a different model. The bottom tray was filled with water. You saved me a potential hardwood floor replacement. Respect
Thanks Mika,
Can you go to scottthefixitguy channel and click the Please Donate button for a Paypal donation of $20.00.
Your donation helps me make more videos.
Thanks again,
Scott
I have just got error F20 on my washing machine what do I have to do now
Thank you Sir
Hi Scott.
I had already cleaned the filter and non-return ball valve. So I pulled the unit out and took off the side panels. The lower tray was wet so I booked a service call.
After watching this video and helping me identify the lower tray float, I sucked 600ml of water out with a large syringe and the unit is working again. I could not see any leaks so I am not sure how the water got into the lower tray. I am going to try and dry the lower tray entirely so then I can see where drips are coming from.
OK... there is a small plastic pipe at the bottom, front, right and it was dribbling continuously during one part of the washing cycle.
To close the loop. The pipe in question captures leakage from the door seal. I cleaned all the seals around the door and now there is no leak, no overflow sensor being triggered and the drain pump stops as expected.
The dishwasher has been re-assembled and moved back under the benchtop. I will be cancelling the service call now.
Thanks
Ray Romano?
Ray Romano
Yes,
I’ve turned to appliance repair after things dried up for me in Hollywood 👍
Great video, thanks
You’re welcome
Thank you for taking the time to make this video, very helpful!
Our 14 y.o. Miele G2120C kept draining with just power on. Looked at the schematics and it was clear that the overflow sensor got activated, forcing the drain pump to run. However, could never guess that the root cause would be a piece of porcelain that broke off a cup and got stuck in the ball valve causing the overflow, much like in your video. Fixed the problem in 20 min, kudos!
Glad it helped Vlad👍😊
I hope you can also subscribe to our channel with this link: ▶️-Subscribe Here: ua-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.html😊😊😊