Land Rover Defender ROOMTOUR + COST BREAKDOWN + Awesome news | Ep. 1
Вставка
- Опубліковано 9 кві 2022
- I have made the decision to restart the World Trip! But before I do, I will give you a room tour of the Land Rover Defender Camper + a cost breakdown. I'm really excited to go on a second World Trip or... should I say finish the first World Trip, which I had to abort due to the pandemic. Anyhow, it's time to prepare for a journey of a lifetime, and I welcome you to follow me on my journey!!
◇ THE EQUIPMENT LIST ◇
Cooler // Dometic CoolFreeze CFX 40W
House Batteries // 95Ah VARTA AGM Accu 12 Volt (LA95)
Solar Panel Fixed // 80 Watt SolarFam ETFE Flexible Monocrystalline 515x1020 mm.
Solar Panel Portable // 100 Watt Portable Solar Panel
Solar Charger // Victron SmartSolar MPPT 75/15 12V/24V
Battery Combiner Kit // Victron Cyrix-ct 12/24V-120A
Converter // 300W Converter 12V to 230V Xenteq PurePower
Coleman Stove // Unleaded 2 burner stove - 424
Water Filter // Inline C-Ultra 10 inch
Water Pump // Marco UP2/E
Heat Exchanger // 30 Plates max. 66 kW Heat Exchanger
◇ MUSIC ◇
I find all my music on Epidemic Sound. You can too with this 30 Day Free Trial:
share.epidemicsound.com/s4ueij
◇ MORE ADVENTURES ◇
Website: www.havefunandgo.com/
Instagram: / havefunandgo
Facebook: / havefunandgo
Twitter: / havefunandgo
#havefunandgo #roomtour #defender #camper
If you want to see the Defender Camper roomtour you can skip to "7:59" and let me know what you think! 👇🙃
:-) We also can't fully open the fridge lid, so I used magnets to keep it open. In our case the lid is metal and I attached two strong rubber-covered magnets to a short strap that dangles from the side of the roof's frame at just the right position to hold the lid open :-)
Hard to explain. Just uploaded a short video to my channel :)
@@frank-lr Smart!! But mine is plastic... Do you have a solution for that? 😉
@@HaveFunAndGo :) You could glue a sheet of metal to the lid. (these self-adhesive iron foils wont work, too weak).
@@frank-lr brilliant thinking man 💡😎
You’ve got a great delivery on your video. Humble, logical and critical.
The fact you are “going to clean your axles” and then proceed to remove and strip them down completely is next level.
I would recommend a really good etch primer for the axles or having them powder coated.
Thank you, I appreciate it! Although the whole process is very time-consuming, I think it's worth it. And powder coating the axle crossed my mind as well, but then I thought about my wallet (; So, I think a good 2k epoxy primer and 2k paint will do the job.
Me gustará ver los cambios que haces en tu defender. Yo también tengo un 110. Gracias por los subtítulos en español.
Aménagement simple mais efficace 😉 jolie travail
Merci pour le compliment!
Welcome back 🌹
Thank you and hello 👋 😎
Your back!! ❤
Ohw yes I am!! 😀 And... You too 😉
Awesome! Looking forward to seeing the rest of the trip. And of course... if you're passing through Kurdistan again... koffie staat klaar!
Thanks man!! A coffee in Kurdistan... Mmmm, sounds like a plan ;)
Very well shot and nicely explained! Looking forward to your next productions! AND the trip of course ;)
Thank you! I will be uploading new vlogs shortly, and I'm looking forward to the trip as well 🤩
Less is more ! Even you didn’t mention to keep the weight down is and will provide much more pleasure driving . Probably you have already on your list to have a technical upgrade on your battery system. Check the web and dive into dc -dc charging. Looking forward to your progress
Less is definitely more, although I'm not worried about the weight. I thought I would notice a big difference after the conversion, but there was surprisingly little. After all, the Defender is a real workhorse! But I agree that slimming down is better for the fuel consumption I Have not deep-dived into dc/dc charging as I'm planning to stick with the original setup. You know, gotta keep an eye on that old wallet 😄
Good luck buddy
Thank you, sir. Much appreciated! 🔥
This is a "no-bullshit" setup and I think it's brilliant! Really curious about the new camper build. Are you going to re-use the plastic storage boxes?
It is indeed! I don't think the plastic storage boxes will return because I'm drastically changing the interior design.
Boomers use Hammerite! No, jokes aside... Preparation is vital. That is also the case for Hammerite, but if you're doing all the scrubbing and cleaning and you have yourself a shiny, bare metal axle, I wouldn't use Hammerite but a 2k epoxy primer and paint just like you mentioned! Oh and about the interior... If it works, it works!
Hahaha! I agree, there are other products on the market nowadays which are better than Hammerite, wax oil or similar stuff. Tending more and more toward the 2k paint.
Good to see you make new plans! Will you travel with 2 or solo?
Ohw yeah! It's a solo expedition because life is a single-player game ;) How about you? Any travel plans with the Unimog?
@@HaveFunAndGo my plans are over 2.5 weeks Norway and the north cape. But I cracked the bottom of my gearbox on Thursday...... So right now the cab is off, motor out, axles loose and gearbox out. So alot of work. But from now it is building again.
My plans are also Solo. I think it the best way to meet people and locals. And you can change your plans any time without discussions 😃
Of course... these things always occur right before you leave 😝 But... Now it won't happen in Norway 🙃 Yes, solo travel has many, many positives!!
👌 ｐｒｏｍｏｓｍ
Ek het my Defender Mike vernoem na my oorlede oom Mike hy het baie mense gehelp en vir my ook hy is ongelukig oorlede aan kanker so ek het myself belowe waneer ek eendag my Defender kry ek hom na my oom sal vernoem en ek het .
I'm so sorry for you're loss! I think it's awesome that one day you're going to name your Defender after your uncle. It's a very cool name; Mike the Defender 😎
@@HaveFunAndGo i named my TD5 what i bought last year Februarie month Mike after my uncle i had a sticker made specialy for that.
@@ScorpioxA1 Ahhh you already have a Defender named after your uncle 👍🏻 Super nice!!