Have a look at other videos on our channel: 🔸 TOYOTA LAND CRUISER PRADO (J120) car repair tutorial - ua-cam.com/play/PLWep5LzT0sxlWNbtUK9LYbFvAi-Ph1qfl.html 🔸 How to replace air filter on TOYOTA LAND CRUISER PRADO 3 (J120) - ua-cam.com/video/dYzzjcUzsec/v-deo.html 🔸 How to replace fuel filter TOYOTA LAND CRUISER PRADO 3 (J120) - ua-cam.com/video/W4YIjHc_dv0/v-deo.html 🔸 How to replace oil filter on TOYOTA LAND CRUISER PRADO 3 (J120) - ua-cam.com/video/9NiXnvy4qCo/v-deo.html 🔸 How to replace pollen filter / cabin filter on TOYOTA LAND CRUISER PRADO 3 (J120) - ua-cam.com/video/KoGW7wNrb4M/v-deo.html
Are you sure it’s 80 Nm torque setting for 17mm calliper bolts. 80 foot pounds would be roughly about 123 NM what the manual specified. If so the bolts are loose by 43 NM.
This information is individual for each car, it should be replaced strictly according to the manufacturer's recommendations according to the service book of your car. AUTODOC
Thank you for your comment, we will take into account your wishes and try to make such a video. Please stay tuned with us that not to miss the news from us. Best Regards, Autodoc Team !
Thank you for your comment! For preventive purposes, the described actions can be done with the back of the brake shims. However, the most important thing is that the grease will be in the moving parts where the pads get in contact with the caliper. Best regards, Autodoc!
This is an anti-creak lubricant, for more accurate information on what is recommended to use, see the technical documentation for the repair of your car directly. AUTODOC
Wow! Can't believe you leveraged the brake pads with the blade against the disk directly rather than against the old pad WRONG WRONG WRONG - so much risk of damage to the rotor!
Have a look at other videos on our channel:
🔸 TOYOTA LAND CRUISER PRADO (J120) car repair tutorial - ua-cam.com/play/PLWep5LzT0sxlWNbtUK9LYbFvAi-Ph1qfl.html
🔸 How to replace air filter on TOYOTA LAND CRUISER PRADO 3 (J120) -
ua-cam.com/video/dYzzjcUzsec/v-deo.html
🔸 How to replace fuel filter TOYOTA LAND CRUISER PRADO 3 (J120) -
ua-cam.com/video/W4YIjHc_dv0/v-deo.html
🔸 How to replace oil filter on TOYOTA LAND CRUISER PRADO 3 (J120) -
ua-cam.com/video/9NiXnvy4qCo/v-deo.html
🔸 How to replace pollen filter / cabin filter on TOYOTA LAND CRUISER PRADO 3 (J120) - ua-cam.com/video/KoGW7wNrb4M/v-deo.html
Are you sure it’s 80 Nm torque setting for 17mm calliper bolts. 80 foot pounds would be roughly about 123 NM what the manual specified. If so the bolts are loose by 43 NM.
This information is individual for each car, it should be replaced strictly according to the manufacturer's recommendations according to the service book of your car.
AUTODOC
You are right - it is 123 N•m.
*HI can we see videos on how to change glow plugs on a Renault laguna 3 Dci models..thank you*
Thank you for your comment, we will take into account your wishes and try to make such a video.
Please stay tuned with us that not to miss the news from us. Best Regards, Autodoc Team !
i have a question, do you need to put some grease at the back of the brake shims?
Thank you for your comment!
For preventive purposes, the described actions can be done with the back of the brake shims.
However, the most important thing is that the grease will be in the moving parts where the pads get in contact with the caliper.
Best regards, Autodoc!
Hi, what is the blue paste which you use on the side of the brake pad? Thanks
This is an anti-creak lubricant, for more accurate information on what is recommended to use, see the technical documentation for the repair of your car directly.
AUTODOC
step 15. is incorrect
Wow! Can't believe you leveraged the brake pads with the blade against the disk directly rather than against the old pad WRONG WRONG WRONG - so much risk of damage to the rotor!
The pads are installed correctly.
AUTODOC.
The the rotors got replaced anyway.
the disks are replaced. The whole point of the video. What's the problem?