LEGO Star Wars 75337 AT-TE WALKER Review! (2022)

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 1,6 тис.

  • @MandRproductions
    @MandRproductions  2 роки тому +514

    Is this the BEST LEGO Episode 3 set ever? Will you be copping? BUY IT NOW: amzn.to/3d2yhxZ (Affiliate Link)

    • @Jay-Zech
      @Jay-Zech 2 роки тому +47

      Maybe the best, but my favorite is Palpatine’s arrest

    • @lexoxo25
      @lexoxo25 2 роки тому +6

      Definitely!!

    • @CanadaBricks
      @CanadaBricks 2 роки тому +14

      No doubt I’m getting it. Too bad LEGO decided to delay it, so now we have to wait longer! And yes, it is the greatest Ep. III set, although you could make an argument for Palpatines Arrest!

    • @outlaw5015
      @outlaw5015 2 роки тому +14

      Not at $140. It’s a good set. But not good enough for $140.

    • @antoniototeda222
      @antoniototeda222 2 роки тому +6

      I think it’s pretty close but palpitnes arrest is a bit better for me

  • @kagoclapz
    @kagoclapz 2 роки тому +1975

    this set is so close to being perfect, but it need just a few changes before it’s perfect, but it’s crazy we actually got P2 Cody within the same 30 years as P2 Rex!

    • @jebiden2025
      @jebiden2025 2 роки тому +76

      At this point he's just nitpicking.

    • @Jay-Zech
      @Jay-Zech 2 роки тому +112

      @@jebiden2025 When you have a set as close to perfection as this one, the nitpicks are more obvious

    • @KadeStro90
      @KadeStro90 2 роки тому +39

      @@jebiden2025 thank you for your input, mr. Former Vice President.

    • @VaderBrix
      @VaderBrix 2 роки тому +13

      @@KadeStro90 He’s the incumbent President tho lol.

    • @omarbaba9892
      @omarbaba9892 2 роки тому

      @@jebiden2025 but the helmet holes look atrocious and why on earth didn’t they include a crab droid

  • @caspo_yt
    @caspo_yt 2 роки тому +2153

    Anyone else think that this would have been the perfect set to reintroduce the super battle droid?

    • @dr_kopic
      @dr_kopic 2 роки тому +78

      (Raises hand)

    • @arktparadise7999
      @arktparadise7999 2 роки тому +43

      You're not alone

    • @bluehero-96
      @bluehero-96 2 роки тому +75

      Why not leave this set alone as a dedicated clone set, and put the SB2 in a set dedicated to CIS droids?

    • @theserpent8667
      @theserpent8667 2 роки тому +32

      @@bluehero-96 See, "only the best is good enough" only applies when they say it does.

    • @thegrenb2756
      @thegrenb2756 2 роки тому +20

      If they had a wearable design that didnt have the legs snap

  • @generallukeproductions
    @generallukeproductions 2 роки тому +590

    The fact that it holds 9 troopers,
    (7 interior seats, 1 gunner, and 1 driver)
    and the set comes with 5, means that if I pair it with my Utapau battle pack from 2014, I can fill the whole thing with 212th troopers which is awesome. Works out perfectly.

    • @gold_flies9199
      @gold_flies9199 2 роки тому +36

      I have that same pack as well lol. thanks for the idea

    • @legospaceskeleton
      @legospaceskeleton 2 роки тому +27

      I had this exact idea yesterday! I have the battle pack too so I’m rlly excited to be able to fit my entire 212th Battalion inside the walker

    • @falloutgamer347
      @falloutgamer347 2 роки тому +6

      I have two of them so if i end up getting 2 of these i can fill up both

    • @takodahager4165
      @takodahager4165 2 роки тому +6

      Just recently bought 2 212th battlepacks off ebay in preparation for this set, can't wait!

    • @romanlegionarius9089
      @romanlegionarius9089 2 роки тому +2

      🤣

  • @Mr_Game-and-Watch
    @Mr_Game-and-Watch 2 роки тому +1091

    I think if they removed the lower bump on the side of the clone helmet it would make the accessory holes significantly less awkward

    • @Skuge_
      @Skuge_ 2 роки тому +36

      it would have been better if they just made the bump higher

    • @omarbaba9892
      @omarbaba9892 2 роки тому +70

      @@Skuge_ no they just shouldn’t have cheaped out and made a new visor mould

    • @Skuge_
      @Skuge_ 2 роки тому +18

      @@omarbaba9892 that wouldnt really be worth it since its for 1 figure thats probably never going to come out in another set in the next few years

    • @noaho0862
      @noaho0862 2 роки тому +40

      @@Skuge_ if your paying for a premium product than you should get a premium product it doesn’t matter if it will only be in a couple sets as “only the best is good enough “ if the prices keep going up so should the quality.

    • @sztefn
      @sztefn 2 роки тому +17

      @@Skuge_ "only the best is good enough"

  • @laneatwood7119
    @laneatwood7119 2 роки тому +377

    It seems like the stud shooters are placed really well. It’s not super distracting and I think it works

    • @kuj2209
      @kuj2209 2 роки тому +8

      I'll still remove them but yeah i agree

    • @idkme7864
      @idkme7864 2 роки тому +3

      @@kuj2209 when there not loaded it looks decent but still prob take it off

    • @noahmaldonado5461
      @noahmaldonado5461 2 роки тому +3

      It helps that they blend in really well with the design and the studs don't stick out like on the old stud shooter

  • @fritz404
    @fritz404 2 роки тому +427

    5:30 you failed to mention they included his scar, a very visible way to distinguish Cody from other clones

    • @Ya_boi_Peasant
      @Ya_boi_Peasant 2 роки тому +2

      Yes

    • @CACgaming007
      @CACgaming007 Рік тому +6

      I put the blade hair on my Cody figure so he has his short hair when he's unmasked

    • @Mothbean
      @Mothbean Рік тому +15

      Yeah, that would require praising lego for something, all MandR knows how to do is whine

    • @optimised120
      @optimised120 Рік тому +10

      @@MothbeanHe complimented the set many many times throughout the video 😂

    • @Starkiller3870
      @Starkiller3870 10 місяців тому

      ​​@@optimised120Yes he's complimented The set and many other several times but You can tell when he complains he complains like a baby in his ATTE comparison video he went on a rant about how the orange tip of the clone trooper printing in this set is slightly cut off by that black line saying and I quote "something LEGO should offer free replacements for" when it's something very minor that has no real effect on the quality of the set and at the end of the day this is just plastic that will soon have no value in the far future. I also personally think he uses Lego's slogan of 'Only the best is good enough' as a crutch to yell his complaints and have some merit of without sounding annoying or obnoxious whether he's right about his opinion or seriously nitpicking

  • @DominionNapalm
    @DominionNapalm 2 роки тому +252

    Its a shame it got delayed.. It more of a a shame if it got delayed TWICE!
    Fun Fact: The Republic Dropship can carry this AT TE if you remove the handle of the AT TE and replace it with the one that attaches to the Dropship.

  • @Captain_Forrdo_is_the_goat
    @Captain_Forrdo_is_the_goat 2 роки тому +400

    Honestly the gunner Looks good with the holes from the front because it makes it look bulky and like a real heavy gunner

    • @lbricks7631
      @lbricks7631 2 роки тому +11

      True.

    • @fenyx044
      @fenyx044 2 роки тому +10

      Just that it is a normal gunner, not a heavy gunner.And gunners uses normal P2 helmet, and they never use Antennas or Rangefinders or Sunvisors, so those holes are completely useless and bad looking.

    • @noahmaldonado5461
      @noahmaldonado5461 2 роки тому +7

      Especially if you put a grey visor on him

    • @fenyx044
      @fenyx044 2 роки тому +3

      @@noahmaldonado5461 yeah to punch the canon and GAR in the face once again..

    • @noahmaldonado5461
      @noahmaldonado5461 2 роки тому +8

      @@fenyx044 hey I'm just taking advantage of a feature Lego gave us

  • @GavinLepley
    @GavinLepley Рік тому +34

    The clone trooper vibrating violently in the gunner's seat is one of the funniest things I've seen this year.

  • @_aexos_5139
    @_aexos_5139 2 роки тому +152

    A perfect minifigs pack would be 2 regular 212th and a 212th airborn trooper, with a crab droid for the side build. Fingers crossed for the 2023 january sets wave !

    • @StonyCarrot1001
      @StonyCarrot1001 2 роки тому +13

      I think that would be perfect as a remake of the 2014 212th battle pack

    • @arktparadise7999
      @arktparadise7999 2 роки тому +1

      Genuis right here

    • @eliminator1472
      @eliminator1472 2 роки тому +1

      I’d put another clone in there

    • @aleksiniko
      @aleksiniko 2 роки тому

      absolutely

    • @kuj2209
      @kuj2209 2 роки тому

      @@eliminator1472 but LEGO wouldn't

  • @becketthan8223
    @becketthan8223 2 роки тому +87

    I personally love that they’re adding the helmet holes again. It allows for a lot more customization when making custom clones which has been rather difficult lately without them.

    • @omarbaba9892
      @omarbaba9892 2 роки тому +7

      But the way they implemented then looks awful

  • @kennysfdg471
    @kennysfdg471 2 роки тому +95

    Can I just mention this is the most clone legions in a wave since the mid 2010s? We had the 41st, 212th, shock, wolf pack, 501st, and a few others in the mid 2010s. Now, we have the 501st and 212th again, the P1 clone bois, the 187th, and the Bad Batch. It looks and feels good.

    • @noahmaldonado5461
      @noahmaldonado5461 6 місяців тому

      Senate commandoes, even p2 geonosis troops which I'm not even sure if they're cannon

    • @kennysfdg471
      @kennysfdg471 6 місяців тому

      @@noahmaldonado5461 Technically the Senate commandos were not clones, but I see where you're going.

    • @noahmaldonado5461
      @noahmaldonado5461 6 місяців тому

      @@kennysfdg471 they aren't clones but they're still troops part of the Republic who came in a battle pack in 2015
      Heck I'm pretty sure there's still something I'm forgetting about

    • @kennysfdg471
      @kennysfdg471 6 місяців тому

      @@noahmaldonado5461 Does Commander Neo count from the 91st? I feel like he's one we're forgetting.

  • @fritz404
    @fritz404 2 роки тому +173

    Great set, definitely could've included an airborne trooper and crab droid to make it 10/10 but other than that it's amazing

    • @fritz404
      @fritz404 2 роки тому +31

      Maybe also Palpatine hologram piece for Cody

    • @Dclerkin17
      @Dclerkin17 2 роки тому +5

      Airborne would be so much better than the gunner

    • @Mixxo6
      @Mixxo6 2 роки тому +16

      My dad bought like 8 212th battle packs from like 2015 when I was young so I have more than enough troopers to fill this beast when I get it.

    • @chilltrooper9423
      @chilltrooper9423 2 роки тому +9

      @@Mixxo6 your dad is the best

    • @Mixxo6
      @Mixxo6 2 роки тому +7

      @@chilltrooper9423 he sure is. He’s been buying Star Wars sets since the very beginning. I have the manual for the first Star Wars sets like the x wing and darth mauls ship, the old battle packs. All the old sets and newer ones. But now they are all stored in these giant bins we have and we have at least 20,000 Lego pieces, MAYBE.

  • @Nerdtendo6366
    @Nerdtendo6366 Рік тому +28

    After getting this set in hand, I really don’t think the helmet holes are that bad. They have not been distracting at all the antennae also looks nice where they placed it

  • @retrobrickreviews687
    @retrobrickreviews687 2 роки тому +48

    What I really like about the different weapons racks being detachable is that you can just remove all of those and have four more spots to place Clones.

  • @KhanhTran-yp3ds
    @KhanhTran-yp3ds 2 роки тому +41

    I think that the option to leave out the jet pack and print it is a pretty good choice because it allows for him to sit in the model. Obviously you could take it off but personally I prefer without it.

    • @Verdun16
      @Verdun16 Рік тому

      But why would you put such an amazing character inside the at-te and not have it out on display

    • @Starkiller3870
      @Starkiller3870 10 місяців тому +1

      ​@@Verdun16Because kids play with it

  • @gaelcross
    @gaelcross 2 роки тому +61

    It really looks like the best Episode 3 set ever to me. Except the missing Palpatine hologram but damn that's a really cool one.
    I kinda liked the interior of the last sets that came out (the AT-AT playset and its 3 seats cabin), for example for Episode 3 the last AT-AP with its 2 seats and wide target screen was really good. I don't even talk about the last Millenium Falcon that has...Too much space inside ! xD
    I think Lego finally realized that our little minifigures need a ride and gave them some place inside vehicles.
    But I really prefered the last clone helmet molds. They were more accurate. These ones look bulky on the forehead sides and the mouth print is quite small.

    • @heisenberg6142
      @heisenberg6142 2 роки тому +1

      Yh the interior is great but I can’t believe they flopped so hard with th justifier interior

    • @gaelcross
      @gaelcross 2 роки тому +1

      @@heisenberg6142 i didn't buy this set yet, quite expensive for me even if it's quite a big boy.
      I'm quite amazed by the Scythe interior though.

  • @TheBrickBrit
    @TheBrickBrit 2 роки тому +243

    The most hyped set of the year is here! 🔥 What’s next after Phase 2 Cody I wonder…

  • @TitaniumJay52
    @TitaniumJay52 2 роки тому +155

    If I’m seeing this properly, the printing on the tops of all the helmets appear to differ from what it shown on the box. The 212th trooper is pretty obvious because of the missing point, but I believe Cody’s and the gunner’s printing on top is a bit wider and more spread out than what is on the box. The prints should be closer to the middle than they actually are. I wonder if there is some sort of printing issue with the new helmet, or if Lego just changed the design sometime after rendering the images.

    • @MandRproductions
      @MandRproductions  2 роки тому +51

      That too, it’s super spaced out from the fin.

    • @criskii
      @criskii 2 роки тому +6

      I think they are gonna fix it like the print error on obi Wan in the Vader vs kenobi set for reviewers

    • @Beer_Dad1975
      @Beer_Dad1975 2 роки тому +5

      Lego seems to have massive problems with alignment on anything that is curved in more than one direction.

    • @shamusmenz389
      @shamusmenz389 2 роки тому +5

      @@MandRproductions what really triggers me with these clones is that on the box the print wraps from on side to the other but irl its squished and makes the clones look like they stubbed their toe.

  • @undead.rising
    @undead.rising 2 роки тому +20

    I can't believe that in 2022, they release a set with MORE minifigures than they ever have included before. Also it has the best balance between the Separatists and the Clones that I think I have ever seen.

  • @retrobrickreviews687
    @retrobrickreviews687 2 роки тому +29

    I think a 212th Battle Pack to add to this is likely, especially since they made a new-style Airborne Trooper in 2020 and it's not present here. Maybe they didn't include the Crab Droid here because they're saving it for that set, like how the 2014 212th battle pack had the Tri-Droid?

  • @stefano1895
    @stefano1895 2 роки тому +20

    Taking a look at 1:42 I'm more and more convinced that 2017 helmet just looks overall way better: better cheek shadows, no holes, more sleek profile and firstly better visor and mouth print!

    • @aleksiniko
      @aleksiniko 2 роки тому

      Yeah! I dislike the newest mouth print. I think it should be thinner but still I like the whole minifigure.

  • @runsoncaffeine
    @runsoncaffeine 2 роки тому +9

    I didn’t expect the AT-TE to be as flourished as it is, it’s generally a solid build with pretty great figs. Def the best set of this wave.

  • @jakegianino5762
    @jakegianino5762 5 місяців тому +3

    This set is just about perfect. By far my favorite set and I’d been wanting an AT-TE forever when it released. Great job Lego!

  • @BrittneyAMcCubbin
    @BrittneyAMcCubbin 2 роки тому +19

    Can’t wait to get my hands on this set. The three battle droids look awesome 😎

    • @Ned-kq8pj
      @Ned-kq8pj 2 роки тому +3

      Such a good army builder for my battle droid army!

    • @thedestiny326
      @thedestiny326 2 роки тому +1

      Yes and this set is amazing its perfectly and the minifigs are balanced

  • @keeshandave8603
    @keeshandave8603 2 роки тому +14

    There are two words I have to say here. HELL YEAH! I actually like this AT-TE because of the return of Commander Cody and the 212th troopers. I don't own the previous AT-TEs (most notably the 2013 version) so this should be a great set I would get and give it a review. I like it!

  • @Baked_Pineapples
    @Baked_Pineapples 2 роки тому +16

    Man I can’t wait for this set. Yeah Cody’s visor is a bit off, but you can always get an accurate visor from CAC (if it fits of course)!
    Other than that this set is hands down my favorite for the august wave. Obi’s starfighter as well

  • @-echo4160
    @-echo4160 2 роки тому +17

    Its so refreshing to see that LEGO really listened to the customers (for once) and actually used the interior space unlike what we got in the AT-TE before that

  • @lordmustard2880
    @lordmustard2880 8 місяців тому +5

    I built this set yesterday, i 100% agree it is so good and very fun to play with

  • @probricksfilms
    @probricksfilms 2 роки тому +17

    I think that this is actually a perfect set! Although of the printing quality issue, it’s really worth it, both minifigures, and the At te itself.

    • @DEVILTAZ35
      @DEVILTAZ35 2 роки тому +1

      It looks ok but the front looks really old school for a new set.

  • @legeaux_squatch
    @legeaux_squatch 2 роки тому +10

    Great review, Ryan. I’m psyched for this set. Loads of clones and a really nice AT-TE. If they don’t recreate P2 Cody, this set should be worth a ton in a few years. Obviously depending on how long the run is.

  • @mateigabrielzaharia4842
    @mateigabrielzaharia4842 2 роки тому +6

    This set will make a fine addition to my collection when i'll actually be able to get it.

  • @giuseppification
    @giuseppification Рік тому +8

    We finally got a Phase 2 Commander Cody. That's all that matters to me

  • @thebrickbulbasaur7628
    @thebrickbulbasaur7628 2 роки тому +7

    This is now my favorite SW set and I’ll be trying to get it the day it releases! That interior is just so good and I can’t wait for the comparison!

  • @imperialshocker2182
    @imperialshocker2182 2 роки тому +17

    This set is a true master piece , can't wait to get one myself .

  • @themandalore7780
    @themandalore7780 2 роки тому +9

    Greatest overall! Really wish we’d also gotten a 212th airborne trooper. I know we got one in the Grievous starfighter. But I really love the airborne troopers. Also Ryan as a heads up the Movie had the AT-TE’s scaling cliffs in Teth. Ryloth was at the end of season 1.

  • @maphoozgaming8542
    @maphoozgaming8542 2 роки тому +3

    I’ve never been more satisfied with a Lego purchase than the UCS AT-AT I love that thing it’s the first UCS set I’ve ever had it’s just amazing to look at in my room and the amount of detail in it and the red visor just everything about it. Well worth the payment

  • @ellabuegelfreiheit4837
    @ellabuegelfreiheit4837 2 роки тому +12

    The climbing at the wall was not at Ryloth, but at Teth.

  • @sir_duckduck8367
    @sir_duckduck8367 2 роки тому +20

    I like how the gunner jumps around while turning the cannon because it looks a bit like recoil from the cannon

  • @kipzmc2024
    @kipzmc2024 2 роки тому +8

    I'm not a prequel guy myself, but this set looks pretty awesome and something I'd actually want from that trilogy!!!

  • @Dclerkin17
    @Dclerkin17 2 роки тому +5

    While the clones don’t use the accessories on the box, they still have them included in the set if you want to use them. Fan service. I guess they can’t please everyone though

  • @RenstashMCDS
    @RenstashMCDS 2 роки тому +1

    Finally ordered mine! Can't wait. Kid-me inside is screaming with joy! This was one I always wanted but never got growing up.

  • @miqvPL
    @miqvPL 2 роки тому +9

    9,75/10 from me so far (based on this review, I dont own it yet), extremely minor details aside I basically don't see a way they could have done it better, unlike previous at-te's there's just nothing wrong with it, the stuff you and I have problem with is only in context of the past at-tes and that little hole on the helmet.

  • @productionsinparadise2880
    @productionsinparadise2880 2 роки тому +7

    Maybe they went with the clone wars box stripe to drive more attention to the fact that there are clones in the set and maybe that will give the set the attention it needs to sell for all the casual lego consumers out there (people who don't pay attention to accuracy but rather need visual hints to sell them on the set).

  • @arkhambricks7082
    @arkhambricks7082 2 роки тому +11

    One issue with the set I know which will happen is that it'll be out of stock for months on end.
    Army building is an aspect of the LEGO Community I dislike as it does make sets impossible to get

    • @shaved_wombat
      @shaved_wombat 2 роки тому

      That’s why I’m staying up until midnight here in the uk! 18 minutes to go!

  • @Lego.brickJK
    @Lego.brickJK Рік тому +2

    I love this new AT-TE walker, all of the minifigures are amazing and I like the spiderdroid

  • @TheStormsChannel
    @TheStormsChannel 2 роки тому +5

    I just got this set, and it's a big improvement over the old 2013 model, much more going on in the interior, and it comes with 5 clones instead of a mere 1 that the old one had.

  • @JimmyMadzCFC
    @JimmyMadzCFC 2 роки тому +2

    I could fill up the whole atte with Obi Wan, the 3 212th clones, the 212th Airborne clone, Commander Cody and the gunner, I could also use it for the Empire! This is the perfect set

  • @TheSaberTrooper
    @TheSaberTrooper 2 роки тому +5

    I'm so glad that your review is out!! I'm so excited for Cody! But those helmet holes 💀

  • @FunksIncKeys
    @FunksIncKeys 8 місяців тому +1

    I have 3 Walmarts in my town. With the new merch coming out in March, I figured it would be a good time to check on clearance sales. One WM still had this @ $140. The other two had reduced it to $112. Both WM that reduced it , put it on clearance. $98 at one, and $83 at the other. I could not resist and had to pick it up for $83

  • @floridamattsreviewsvlogsan3892

    The buildable figure of Cody was huge so having a dual mold helmet made sense. In my opinion, a dual molded helmet for the Cody minifigure would be hard because of how small the helmet is.

  • @HelpIdkAGoodUser301
    @HelpIdkAGoodUser301 Рік тому +3

    I got this for Christmas and im so excited about it. Its awesome!

  • @Bro_IsHim-1
    @Bro_IsHim-1 2 роки тому +8

    I absolutely love the 212th troopers. One of my favorite clone legions and I'm excited to make an army and use them in my Mocs.

  • @Extinium.
    @Extinium. 6 місяців тому +1

    This is my DREAM lego set. Probably might get it for Christmas or my birthday

  • @maxcy2890
    @maxcy2890 2 роки тому +3

    imagine we get a drop ship + an at-ot (even if they are seperate) next year and your able to use the drop ship with the at te too. would be amazing

  • @aidanfrost9327
    @aidanfrost9327 2 роки тому +2

    Drinking game: take a shot every time Ryan says “in years past”

  • @dalestanding5223
    @dalestanding5223 Рік тому +6

    Who else thinks it should have been a crab droid

  • @Wowreally7213
    @Wowreally7213 4 місяці тому

    Thank you Ryan, after watching your reviews I realized I should only watch your videos! After you release your videos, I have noticed 95% of all other UA-camrs say exactly what you say like you’re writing the script for them! Your reviews are honest and well done it’s a shame people steal from you! Your content should be your content lol

  • @CanadaBricks
    @CanadaBricks 2 роки тому +14

    I can’t wait for this set! Too bad LEGO decided to screw us over and delay it without telling anyone!

    • @LaydleBagel
      @LaydleBagel 2 роки тому +4

      How'd you get screwed over, I'd love to try and help

  • @Daft-SFM
    @Daft-SFM 7 місяців тому +1

    When i looked at the box art and realized the helmet prints are different than what we go i thought i was going crazy

  • @thomashayden2887
    @thomashayden2887 2 роки тому +5

    The 2014 style p2 clone troopers looked so much better, I still want these clones but they look awful compared to the 2014 ones. The part I hate the most is the cheek part on the helmet along with the eye visor part is not as stretched out.

  • @Tyrant18able
    @Tyrant18able 2 роки тому +1

    Finally someone said the Helmets print error 🙌 👏 about Time! All other reviews were trying to avoid the subject. Thanks M&R 👌

  • @kylemorrow3625
    @kylemorrow3625 2 роки тому +3

    there is enough room, if you have the 501st battle pack, to fill the at-te with the 501st and 212th figures. I'm excited for this set. Out of the 10+ years of collecting, I haven't gotten one and in the beginning of this year I was hoping one would come out, and it did. Feel like we should of gotten an actual episode III Kenobi, like what we should of gotten with General Grievous' starfighter.

  • @onjah7773
    @onjah7773 Рік тому

    Man for the most part I've lost out on those clone wars sets but having the coruscant guard gunship and this really helps to fill that void in my soul

  • @Jay-Zech
    @Jay-Zech 2 роки тому +16

    So, I’ve never been a big army builder, however, the excitement around this and phase 2 Cody inspired me to go out and get a 501st battlepack to test the waters, and my wallet is sad to say that I’m now hooked.😂 I’m already planning to buy more 501st, and I plan to buy this as soon as possible. Please pray that I don’t convince myself to buy a second one, my wallet can’t take it🤣

    • @DarthMalaks_Missing_Lower_Jaw
      @DarthMalaks_Missing_Lower_Jaw 2 роки тому +2

      This will be available for a couple of years so no need to rush to buy a second one. Maybe get one now and wait to see if there's a battlepack that comes out.

    • @StonyCarrot1001
      @StonyCarrot1001 2 роки тому +1

      @@DarthMalaks_Missing_Lower_Jaw they’d be stupid not to release a 212th legion/battlepack set to go with this at-te

    • @Jay-Zech
      @Jay-Zech 2 роки тому

      @@DarthMalaks_Missing_Lower_Jaw Probably not where I live. The 501st has been in stores since late 2020/early 2021. So if that’s any indication, it’ll be a few months before it shows up in stores, but I think it’ll be pretty well stocked at my local targets by February

    • @abal-m4525
      @abal-m4525 2 роки тому

      @@DarthMalaks_Missing_Lower_Jaw does it mean i do not have to worry about the at te being sold out, where Can i find out when particular sets retire?

  • @Saber_monke
    @Saber_monke 2 роки тому +2

    I’ve been saving since I first saw this I need it in my collection set is immaculate and it has my favorite clone legion I’m so hyped

  • @Makocat
    @Makocat 2 роки тому +4

    Sadly I don't think they'll be fixing the clone printing anytime soon. Or ever. The Mando helmet has the same issue that the visor is shown higher up but the actual fig is lowered and has been since release. We are stuck with this design which baffles me cause the old print (even shown on your old 212th CW fig) was way better in comparison.
    "We are supposed to go up, not down" - Obi-Wan Kenobi

  • @timoconnell5804
    @timoconnell5804 Рік тому

    "...and then some caution, or like, I'm an AT-TE watch out...lights, I guess."
    that was so funny, don't ever change, Ryan, I love you bro

  • @Bowie0
    @Bowie0 2 роки тому +6

    If we’re talking inaccuracies, one major inaccurate detail i don’t see mentioned a lot is the cannon in the at-te. The entire cannon is supposed to move up and down, not just the barrel.

    • @callumpears1523
      @callumpears1523 2 роки тому +1

      Yeah that was my main issue with the 2013 set. Shame they didn't fix it here.

    • @aleksiniko
      @aleksiniko 2 роки тому

      I think it's fine. The order 66 scene can be made with only the barrel moving up. But still Lego should have put a palpatine hologram into the set.

    • @Bowie0
      @Bowie0 2 роки тому +1

      @@aleksiniko But it could still be accurate without that piece or even commander Cody for that matter. That’s something you and I would have wanted but it’s not an objective inaccuracy like the cannon, which is something they’ve even done right before. Just because a set lacks a figure, a piece, or even a build, does not make it inaccurate. However when a figure design or build is objective wrong or incorrect to how it’s portrayed in the source material, that is inaccurate. it is a blatantly inaccurate design of the at-te to have the cannon barrel go up and down and not the cannon as a whole.

  • @spacecat7377
    @spacecat7377 Рік тому +1

    The amount of times Ryan says “in years past” is impressive

  • @Skillverfish_
    @Skillverfish_ 10 місяців тому +3

    I got this Lego set for Christmas and I loved it. But it took me 5 hours to build...

  • @FinnishEmpire
    @FinnishEmpire 2 роки тому +2

    Im nerding out while watching this. I love this set and cant wait to get it. I really needed more 212th troopers and i really want Cody.

  • @verndexter
    @verndexter 2 роки тому +4

    The 2008 one could be propped up on its hind legs, but the two grey slope pieces on the back panel would usually break off

  • @MarvinMcCaster
    @MarvinMcCaster Рік тому +2

    Man, this AT-TE was an awesome return and upgrade from 2013. I don’t know why the Republic Gunship had to go backwards and not have any small builds for the interior spaces.

  • @The_Lego_Dude
    @The_Lego_Dude 2 роки тому +3

    This is the most hyped set this year! Hopefully now after Phase 2 Commander Cody they can make a new and updated Phase 2 Captain Rex!

    • @aleksiniko
      @aleksiniko 2 роки тому +1

      Yes! I would love to get Captain Rex next. Maybe Commander Fox after Rex!

    • @The_Lego_Dude
      @The_Lego_Dude 2 роки тому +3

      @@aleksiniko Yeah! That sounds like it would be amazing!

  • @rezaomar3397
    @rezaomar3397 2 роки тому

    Lol watching that clone bob around in the gunner seat was quite funny

  • @carloleal2065
    @carloleal2065 2 роки тому +15

    I am all for clone troopers, but I still think the 2014 version of the phase II clones looks waaaay better 🥲

    • @callumpears1523
      @callumpears1523 2 роки тому +2

      Same. I'm honestly pretty disappointed that we got a phase 2 Cody now and not in the future whenever LEGO realises that the new Clone style is trash and goes back to the 2014 one.
      I still can't believe they actually approved the ugly design for the 501st troopers.

  • @Zionguard935
    @Zionguard935 2 роки тому

    I'm gonna take a shot for everytime M&R says "Years past."
    Awesome video man! This is probably my favorite AT-TE to date, figures out considered.

  • @AlexDown1
    @AlexDown1 2 роки тому +17

    Don't get me wrong, this set is excellent. the few problems it does have are excusable, I really hate how some people are so quick to call Lego lazy, my theories are that they tried designing a crab droid and new super battle droid, but they couldn't live up to there standard, they also may have used up the budget and time from experimenting with a new super battle droid mold and the mold they actually did use.

    • @fritz404
      @fritz404 2 роки тому +4

      Occam's razor, they are probably just lazy

    • @omarbaba9892
      @omarbaba9892 2 роки тому +4

      No it’s definitely lazy, you can create a great looking crab droid using regular pieces

    • @legospaceskeleton
      @legospaceskeleton 2 роки тому

      I’m hoping that they didn’t put in the crab droid cuz it might be in the potential 2023 battle pack and wanted it to be exclusive

    • @StonyCarrot1001
      @StonyCarrot1001 2 роки тому +1

      @@omarbaba9892 the problem I’ve seen with almost all crab droid builds I’ve see is they take so many pieces definitely more than the spider droid ands that’s probably why they didn’t add it

    • @omarbaba9892
      @omarbaba9892 2 роки тому

      @@StonyCarrot1001 but it direct use any large moulds like the round ball piece thing used as the head

  • @Emetoss
    @Emetoss 2 роки тому +1

    God damn daddy,you don't know how much I waited for this review

  • @chizyspokemon9404
    @chizyspokemon9404 Рік тому +5

    i wonder if the handle on top will be used for a new LAAT gunship to carry it and drop into the battle

  • @themasterchef9784
    @themasterchef9784 2 роки тому +1

    Ack! That darn spider droid again! If only we had a crab droid… So close!

  • @ivor..
    @ivor.. 2 роки тому +7

    Phase 2 Cody makes up $130 of the set and rest of minifigs represent $10

  • @trentoninnewjersey
    @trentoninnewjersey 2 роки тому +2

    Bought this set at the beginning of the month on Amazon. Set arrived last night and it love it. Yeah, the helmet holes not being filled in is annoying, there’s an inaccurate print on top of the helmet, and there should’ve been a crab droid, but those are the only real flaws. And NONE of them are about the AT-TE build itself.
    I’d probably also give the set a 9/10 but it was a really fun build and looks so cool on display

  • @jonathans.219
    @jonathans.219 2 роки тому +2

    Man, if they keep Cody exclusive to this set…. Retirement will go REALLY WELL for this set

  • @andrewstreet5356
    @andrewstreet5356 2 роки тому +1

    I’ve never heard him so happy reviewing a set

  • @Bealls68
    @Bealls68 2 роки тому +6

    I hope phase 2 Cody comes in something cheaper like a micro-fighter down the line.

    • @aleksiniko
      @aleksiniko 2 роки тому +1

      Lego might make a 212th trooper battlepack that contains airborne trooper or Commander Cody.

    • @Bealls68
      @Bealls68 2 роки тому +3

      @@aleksiniko I feel like battlepacks shouldn't include named characters because they're used as army builders and if someone buys a bunch of battlepacks they'll have a lot of duplicates of that named character, so a microfighter would make more sense for Commander Cody.

    • @aleksiniko
      @aleksiniko 2 роки тому +1

      @@Bealls68 yes. But it is likely that Lego would quit making new micro fighter sets. And if that's so then it is likely that lego would either make a battle pack or a 40 dollar set that contains Commander Cody. Lego said that making expensive sets that contain hard to get Minifigures is not right. That's why they made the clone fighter tank and ph 1 clone trooper battle station sets.

  • @eligebrown8998
    @eligebrown8998 Рік тому +1

    I just bought mine 2 days ago. Not done building yet but so far so good. I'm a truck driver and not home much so I buy these when I'm on the road and when the roads are closed cause of snow or I'm waiting 2 days for a load,Legos is what I work on usually

  • @ironlegoman7876
    @ironlegoman7876 2 роки тому +4

    I think, this is the best clone set we got in 4 years, but i also think that the Helmet holes could be better.

    • @aleksiniko
      @aleksiniko 2 роки тому

      Agreed. I also would have wanted LEGO to make brand new helmet mold for Cody. I didn't expect them to make just holes in the sides. But still I love like the concept and the armor printing. Very nice figure to be added in to my collection.

  • @reaperspride2553
    @reaperspride2553 Рік тому +1

    This is so awesome
    I've been collecting funko and hot wheels for about 2 years now
    Use to collect star wars legos up til 2011
    Our house burned down n lost it all
    Just had a few minifigures that survived cause they were in my backpack at the time
    I still have my og captain Rex
    Hope to find some of these new sets to add to my new lego collection
    Really wanna build up my troopers again
    Had about 150 back then
    My grandparents then when they were alive use to always buy me 2 of each
    Now with twin sons it's gunna be a epic ride to build up this new collection

  • @Ilovedecayingwinter
    @Ilovedecayingwinter Рік тому +15

    I'm nine years old and I am trying to get this set! I already have 102$ 😃

    • @trentoninnewjersey
      @trentoninnewjersey Рік тому +6

      1. That’s so amazing, keep saving!
      2. If you’re nine, you shouldn’t have a YT channel (I think UA-cam terms of service says you need to be 13)

    • @Ilovedecayingwinter
      @Ilovedecayingwinter Рік тому +8

      My brother said this on my account haha I am 13 and he is 9. He actually brought the set and is so happy with it

    • @harleymcgrath
      @harleymcgrath 3 місяці тому +1

      You could get it in England for 88.99£

  • @kayleighscott9177
    @kayleighscott9177 2 роки тому +1

    I’m here for the holes on the gunner. A black visor would be killer on that fig

  • @joshoriordan3325
    @joshoriordan3325 2 роки тому +3

    Instead of the spider droid 5hey should've included a crab droid or maybe an optuptara tri droid (like the one that came in the 212th battlepack a few years back)

  • @koreoprezzii
    @koreoprezzii 2 роки тому +1

    U will always be my favorite reviewer and comparison-er with sets. Im not watching solidbrix comparison cuz im waiting for yours and im kinda tweakin rn but yeah idk just do the comparisonim hypes for it lol

  • @SageSea1
    @SageSea1 2 роки тому +4

    The stripe nitpick is… quite the nitpick. I honestly quite like the orange stripe, it fits the color palette of the box art as well as the theme (212th) of the set. A blue stripe would’ve stuck out like a sore thumb. I’m not sure this is the reasoning for the orange stripe I’m satisfied nonetheless.

    • @timewarpdrive77
      @timewarpdrive77 2 роки тому +3

      A nitpicks are valid flaws... and for 140 dollars, there shouldn't be printing errors and/or false advertising to this magnitude

    • @GrandAdmiralGonk
      @GrandAdmiralGonk 2 роки тому +1

      @@timewarpdrive77 Yeah, but it's lego, what do you expect?

    • @timewarpdrive77
      @timewarpdrive77 2 роки тому +1

      @@GrandAdmiralGonk I expect them to make a quality product... which is an expectation thats regularly subverted

    • @GrandAdmiralGonk
      @GrandAdmiralGonk 2 роки тому

      @@timewarpdrive77 OK, you have a point

    • @omarbaba9892
      @omarbaba9892 2 роки тому +1

      @@GrandAdmiralGonk “OnLy ThE bEsT iS gOoD eNoUgH”

  • @Mando321g
    @Mando321g 10 місяців тому +1

    I got this set for Christmas and I'm really enjoying it

    • @mcoy217
      @mcoy217 10 місяців тому

      Same!

  • @igotwect3174
    @igotwect3174 2 роки тому +2

    I would assume that the spider droid was included because it utilizes one of the ball turret pieces, which would replace the need to make a crab droid design.

  • @incortersmand
    @incortersmand 2 роки тому +2

    OMG finally man I’ve been waiting for your review! And why did Lego send it to every Lego UA-camr except for you 😢?

    • @omarbaba9892
      @omarbaba9892 2 роки тому +1

      Because he’s not in the Lego ambassador network anymore

    • @incortersmand
      @incortersmand 2 роки тому

      @@omarbaba9892 sadly

  • @the_principality_of_zeon
    @the_principality_of_zeon 2 роки тому +3

    For once, I’m finally gonna get an AT-TE edit: I actually think the helmet holes make the helmet look cooler