Розмір відео: 1280 X 720853 X 480640 X 360
Показувати елементи керування програвачем
Автоматичне відтворення
Автоповтор
You should list the material and tools you use in the description !!!
I should
Could this also be used in exposing a photopolymer plate? Thank you!
I don’t know maybe
What kind of emulsion do you use?
Good Vid, and the project worked out well!
Thanks ! The first screen was under exposed ... if you make this ... leave your screens on for two minutes :)
Can it burn halftones perfectly as uv exposure unit?
I haven’t done many half tones / but I don’t see why not as long as you burn it long enough
I’ve worked a lot with halftones on an exposure unit. Typically you want to expose it less than you would normally. We’ve found that regular exposure time makes the dots blow out way too easily.
Thak you for sharing! Question: after each exposure you remove the screen then put it in a box, why is that? TIA
I didn’t want to expose it anymore with natural light until I washed it out - thanks for watching
Well at least from what I remember - it’s been over a year :)
Why you dont use an flamethrower! It would be easier
I got one of those - LOL -
@@ArizonaLifestyles1 I bet you do 😂🤌😅
@@areseses1773 more of a propane weed torch … but that flame goes out 2 feet full blast …. But that’ll burn out those screens in 1 second LOL …
what is the distance between the bulb and the glass?
I mounted the light right in the middle of a 10-12” cabinet so with the housing on the light about 4-5 “
Is this UV light or normal halogen lamp please tel us sir
Normal halogen lamp nothing special
Why do you need glass?
You could use plexiglass I guess … glass is clear and you need something clear to transfer the light through
3 mins in the sun??? haha 45 seconds over burns for me
It’s a learning process !
put your caulk in the box!
Height of the box sir?
Hight of that would be 12” since I used an old upper cabinet and laid it on its back
Halogen does got hot?
@@safwankhanzarir yes overtime but I really don’t have it on for a long time …
Size of glass in mm??
No clue
You should list the material and tools you use in the description !!!
I should
Could this also be used in exposing a photopolymer plate? Thank you!
I don’t know maybe
What kind of emulsion do you use?
Good Vid, and the project worked out well!
Thanks ! The first screen was under exposed ... if you make this ... leave your screens on for two minutes :)
Can it burn halftones perfectly as uv exposure unit?
I haven’t done many half tones / but I don’t see why not as long as you burn it long enough
I’ve worked a lot with halftones on an exposure unit. Typically you want to expose it less than you would normally. We’ve found that regular exposure time makes the dots blow out way too easily.
Thak you for sharing! Question: after each exposure you remove the screen then put it in a box, why is that? TIA
I didn’t want to expose it anymore with natural light until I washed it out - thanks for watching
Well at least from what I remember - it’s been over a year :)
Why you dont use an flamethrower! It would be easier
I got one of those - LOL -
@@ArizonaLifestyles1 I bet you do 😂🤌😅
@@areseses1773 more of a propane weed torch … but that flame goes out 2 feet full blast …. But that’ll burn out those screens in 1 second LOL …
what is the distance between the bulb and the glass?
I mounted the light right in the middle of a 10-12” cabinet so with the housing on the light about 4-5 “
Is this UV light or normal halogen lamp please tel us sir
Normal halogen lamp nothing special
Why do you need glass?
You could use plexiglass I guess … glass is clear and you need something clear to transfer the light through
3 mins in the sun??? haha 45 seconds over burns for me
It’s a learning process !
put your caulk in the box!
Height of the box sir?
Hight of that would be 12” since I used an old upper cabinet and laid it on its back
Halogen does got hot?
@@safwankhanzarir yes overtime but I really don’t have it on for a long time …
Size of glass in mm??
No clue