Best Tools Of 2023 | My Favorite 20 New & New To Me Tools!
Вставка
- Опубліковано 8 лип 2024
- Please Like, Comment, and Share. Be sure to subscribe for future videos. Don't forget to hit the bell icon for notifications. UA-cam has changed what they show subscribers!
Ko-ken Tools - kokenusa.com Promo Code MrSubaru10 gets 10% off sitewide!
Ko-ken 1/4" Z Series - kokenusa.com/products/1-4-sq-...
USAG 285X Wrench Set - www.misterworker.com/en/usag/...
Redline Detection Dual Smoke Machine - redlinedetection.com/products...
AES Wave uScope Basic - www.aeswave.com/uScope-Basic-...
Cornwell Z Series - webcat.cornwelltools.com/JRZF...
Snap-on Double Flex Ratcheting Wrenches - shop.snapon.com/product/Flank...
Snap-on Pliers - shop.snapon.com/product/Combi...
KTC NEXT Ratchet - neprostools.com/products/next...
GRIPEDGE RPT - www.gripedgetools.com/
AES Wave uActivate 2.0 - uactivate.aeswave.com/product...
KTC ATPBRZ8603 - amzn.to/3RDfc60
Subaru Specialty Tools - www.amazon.com/shop/mrsubaru1...
Subaru Head Gasket Essentials - www.amazon.com/shop/mrsubaru1...
Subaru Timing Belt Essentials - www.amazon.com/shop/mrsubaru1...
StoreFront - www.amazon.com/shop/mrsubaru1387
If you like the vids and want to help make more: paypal.me/MrSubaru1387
I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. I recommend safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond my control, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not myself. - Авто та транспорт
My co-worker is my bosses favorite tool!😂😂
😂😂😂
Too funny 😂
Would even funnier if your co-worker is female.
That’s bullshit. You know you’re the only one who works for him.
No shame in torturing your employer bro.
😢@@billyarsenault1970
Every time i watch one of your videos like this my wallet takes a hit, always on point. Anything ive gotten has always been useful and rewarding
I have the AES Uscope also. A great product for finding wiring issues on digital busses. This was a game changer on my GM diesel truck, helped isolate a wiring issue on my GMLAN low speed buss. Saved thousands from what would have been charged at the dealer!
Wamted to let you know, your video on converting to Milwaukee tools made me get the snap on CTR867 long neck ratchet.
It just blew my Milwaukee out of the water and feels much hetter built.
Thanks for heung the channel i go to for tool reviews along with torque test channel and project farm!
Thanks for sharing your results and the tool links . Have a Great 2024 !
Thanks friend !!
Great video.
Thank you for all of the tool research that you do!
You're welcome!
When I was a Mercedes diesel tech, we got the redline smoke machine. I loved it. Finding boost leaks and exhaust leaks was easy with it.
Fantastic have a happy new year mr Subaru thanks for all the great videos 👍
That was beautiful and so was the dad advice that was next level
I usually pickup any of your recommendations! Now Ive got quite the shopping list! Thank you!
i really appreciate your videos. They have helped me lot.
Thank you for the video and review brother. The only one that surprised me was the GW ratchet. I gave up on then a few years ago when it seemed the quality went south. I had two ratchets fail and just said to myself, serves me right.
Two items i bought this year that i am impressed with. Milwaukee impact sockets and their wrenches. I had no business buying the wrenches i guess, got more than i can use now but they feel great in hand and have good tolerances.
Hope y'all have a great new Year's.
That snap on wrench set cost well over $700 😆. I couldn’t do it I bought Horrible freight version. I don’t wrench professionally anymore but I still like to keep my tool box up to date. One of the best tools make in the past years.
Dude look into wright tools wright grip combination wrenches, they can be had for fairly cheap secondhand unlike SO and man I’m telling ya wright tools is one of the few truly who still proudly make great tools on American soil and their alloy second to none imo, just phenomenal stuff
That light looks identical to the ICON one I impulse bought. Said ICON light has thoroughly impressed me
Same, I'm also pretty impressed with them, just wish they had 2 flex points for more angle options.
The Snapon pliers are just better, and if you’re spending Snapon money on a tool make it a tool you use all the time like those pliers.
Well done, thanks..!
Thanks!
Probably the most interesting set of recommended tools that I’ve watched and I watch a lot. I’m shooting for those Milwaukee pliers. I like Nepro’s tools also.
I have that same Vessel screwdriver. I picked it up on your recommendations. It’s awesome only problem I’ve had is the standard Phillips bits would cam out before I could over tighten anything. I’ve got to pay attention with those JIS bits, they don’t let go 😂
Beginning of career 2011 ! WOW, I've been at it since highschool. ,1976 ! You make me feel old !.😭
You and I are old!
Absolutely the best tool review I have seen on UA-cam. Not a fan of Subaru's engines (with their inherent design faults) but I still watch your channel. Keep up the good work! I even enjoy you tackling the repairs & giving us a heads-up on what to watch out for.
Those Knkuts look very similar to the Norseman Vortex. The Vortex have been great, everyone loves them that uses them.
You highlighted some amazing tools on this one!
I have the Craftsman Overdrive metric wrench set. Extremely impressed.
And got the Grip Edge 1/4 metric hex set today. What a great little set! Still costly but much less than the MAC!
Hello Mr Subaru. Is there any way you could please list the part numbers for the EXACT socket and ratchet combination that you socket use for a 2020 Outback for spark plug removal . Love your channel and appreciate your time thanks.
My shop has a really nice smoker, the pressure is adjustable to whatever you need, easy to refill the fluid and work with it can be DC or AC powered, it makes leak finding gravy work, it takes longer to set it up than finding the leak most of the time
What model?
I love the Snappy double ratcheting wrenches, best backdrag ever!
THey better be for $800
@@stopthephilosophicalzombie9017 U ain't wrong!
Happy New Year Sir🎉🥂 keep making awesome content 👌👍
Happy New Years!
Great videos! Thought I’d share to make your life a bit easier and let you know on the later cvt transmissions with the exhaust running on the driver side the fill/check plug is moved to passenger side according to the Subaru manual.
RIght, later the manual has stated this. The first years of the change, they still indicated in the FSM to use the driver's side plug.
You forgot Lyle's wiring harness connector pliers
Big oooof 🤦🏻♂️🤦🏻♂️🤦🏻♂️So many good ones this year!
Those are the same as the mac ones right? Managed to get a set of the mac pliers from my mac distributor because someone ordered them and never ever picked them up😂
I got that Snap On zero offset dbl box end flex head reversible ratcheting wrench set (that’s a mouthful) for Christmas. Gorgeous wrenches, but I had to send in 4 of the 5 for warranty due to floppy heads (wasn’t able to tighten) and a loose mechanism in the head of one. The replacements are on backorder until Feb. The rep surmised they are sorting out some of these QC issues with the first batch and the second batch in Feb should be up to Snap On’s standards, at which point you will see them back on the site and the trucks.
Wow !
Damn, I got socks for Christmas…
Snap On should give everyone a partial refund who bought these and had that issue, and had to wait until February for replacements. That's crap.
Cornwell Z series ratchet are made in USA due to the logo has a deep eching. Non USA ones have laser eching only.
What scan tool would you recommend for a weekend mechanic working on his own cars? I have a VW and a Honda. I like the xtool d7/d7s. I also like the artidiag 900bt based on your review.
Amazing tools and amazing video, but dam that's a lotta money for tools! I don't wrench professionally, but I do enough on our own cars, computer, home, mowers, chainsaws... that I appreciate having the right tool for a given job when I need it!
I have everything Milwaukee makes, but I tried the dewalt 921b and it’s amazing, has size of m12 stubby with the power of a mid torque. I never use my m12 stubby now.
@mrsubaru1387 which torque wrenches do you recommend I have a 03 outback station wagon 2.5L EJ251 I want to order a smaller one and a longer one.
Great video! have you used any of the iCarsoft scan tools? love to hear a comparison
Not yet!
If you like the Milwaukeee impact you really need to try out the Hercules 3/4 and 1/2 inch impact.Mind blowing power
17:28 The fill/ check plug is located on the right side of the CVT right behind the inhibitor switch for these models with the exhaust on the left side of the CVT
In the words of one of my favorite Americans "All you have to do is flip a swish." - Ricky Ricardo
I love love LOVE the insider electric ratchet. However we really need an extension for it. When last I checked there still wasn't one available.
That looks identical to the icon folding light, the uv is cool
Any inexpensive scan tools that can do simple dyi things like brakes and transmission relearn for 2024 models?
Thanks & Happy New Year!
Happy New Year!!!
Please make one video just for the scanner diagnostic
Have you tried the gear wrench XL flex head ratchet wrenches? Super long and not too expensive.
I haven't.
Tjose USAG wrenches are great, but only a 2 year warranty. I think you need to buy the Mac version to get a lifetime warranty.
💪🏴
What kind of camera do you use? Very clear !
iPhone 15 Pro MAX.
The new Mac ratchets have a suspiciouly similar locking flex head design to that gearwrench ratchet. Specifically MR990LFPA
Can't seem to find those sockets. No link in description?
Hello @MrSubaru1387
Do you have a decent alternative to this set
13 pc 3/8" Drive 12-Point Metric Ratcheting Crowfoot Wrench Set (8-19 mm) (Blue-Point®)
Thanks!
The tektons are nice
Mr Subaru.. I have a product of the year for you 2024.. get you some HD video Glasses or at least a go pro lol. Opening w one hand 😂
Gopros are garbage. Had at least 6 of them. Video quality is always meh.
Are the USAG similar to the craftsman overdrive? I own the SAE set of craftsman wrenches and they looked very similar. Thanks for the great content also!!
The USAG and MAC versions have an extra tooth in the open end and the beam/handle is wider, smoother, and more comfortable.
@@MrSubaru1387 gotcha! Thank you sir!
Moving on to.....
I like koken stuff, but what's the point of having a shallow socket combined w the extra length of the swivel base?
Link to the vessel ratcheting driver please?.
linked in description and on screen links
Did you get the Cornwell from Tyrone?
Sir... what size jack stand to use on 2004 forester x ? Pls help
there are different points to use a stand depending on job or height needed ,15" ?
I normally work with 6 Ton stands, overkill, I know.
@@MrSubaru1387 thank you sir... But I just placed an order for 3ton stands. Hope that's okay for front suspension ball joint replacement.
What’s the best impact wrench for cheap in 2024?
Would like your opinion I’m a 19yr old tech a 1 1/2 into this I guess you could say industry
Knkut makes the Matco drill bits correct?
No. VIM makes the Matco bits, Taiwan sourced, not USA
No. Astro in China. The hypersteps.
HELP. can’t find 1/4” koken in this video w/that spin wheel. Do you have an item number. Thanks
The thumb wheel is sold separately. kokenusa.com/products/z-series-1-4-sq-dr-quick-spinner
@@MrSubaru1387 dude. You are the ding dang MAN. Watch all your videos-we all got Subarus (my family and wife’s family) thanks and keep it up
@@MrSubaru1387 dude-I take it back, you just cost me $350 on 1/4&3/8 z ratchet, double swivel, quick spinner. 👍
@toddperdue8164 hope you used promo code MrSubaru10 to save 10%!
@@MrSubaru1387 crap. I used 1387. No wonder it didn’t work
Is Mr.Subaru a Vermonter? It all checks out. He even has the accent
South Carolina atm iirc.
Born and raised, 36 years, in South Carolina.
@@MrSubaru1387what part? Raised in Summerville, North Charleston area but traveled to Manning, Sumter a lot for work
This seams more of an infomercial than a review lol
Drill bits (drills) are machinist tools. NEVER buy tool truck brand drills. They are a waste. McMaster brand are going to be better every time. Get HSS and buy once cry once. They will last several lifetimes for mechanics. Chicago Latrobe, Vermont American, and Viking are the best. They are worth the cost and still are cheaper than the matco trash
The m12 high speed long neck has to be my #1 of the year. I was thinking about the insider, but I was hesitant without being able to put my hands on one
Drill bits (drills) are machinist tools. NEVER buy tool truck brand drills. They are a waste. McMaster brand are going to be better every time. Get HSS and buy once cry once. They will last several lifetimes for mechanics. Chicago Latrobe, Vermont American, and Viking are the best. They are worth the cost and still are cheaper than the matco trash