Mercedes W211 CDI 220 - Turbocharger Replacement - Diy
Вставка
- Опубліковано 25 вер 2024
- "Some errors on this video.
Exhaust to turbo clamp initially fitted the wrong way around with the old seal used corrected later in the vid, no oil put in to turbo before fitting the oil feed pipe which has no 2 x new copper washers on the banjo, precharging the turbo with oil prevents start up damage to the turbo bearing.
No new oil seals on the oil feed and scavenging pipes.
Amazingly a new turbo to manifold gasket and bolts are fitted :)
The orange seal for turbo to air box and breather pipe should be fitted to the turbo side and not the pipe before fitting, this stop accidental creasing of the seal inside the pipe."
Thanks to user Ikg26alpha !
Do It Yourself
/ diystreaming
What a great video. Very detailed and helpful! 10 points!
Thanks for the video, I believe it is mounted the same way on the 2.7 L 5 cylinder diesel version of the w211, they look alike. I'll try and go dismount it.
Thanks for the video, I was struggling with a disassembly issue till I saw this!
Thank you. No wonder I could not find the turbo.
Добрый день. Можно видео по замене уплотнения между ГБЦ и вакуумного насоса. Пишут, что прокладка там вечная(ничего вечного не бывает), может в самом насосе есть ещё уплотнение, собирается капля масла на нижнем болте. Если можно номера прокладок. Любая информация. Спасибо.
Il faut débrancher la batterie ?
Not mecessary, just make sure keys are in position 0 (switched off)
Nemiro Siri turbo mersdes e220
Can you tell me how you removed the pipe that goes to the engine? ,, 2:46''