Interesting Video, I'm basically just learning Mechanical Engineering & this is a huge help, now I know how the bearing's supposed to go into the housing & how to tighten it on the shaft, I need more of a slave gear shaft for a project I'm working on, So i can connect a Drive gear to a slave gear with a chain to rotate the gear for an axle on a Motorized Walk behind Snow Plow carriage I'm working on building.
Im a bit split about the explanation about re greasing, allowing the grease to seep through the seals. As these seals are basically single lip clip fit seals, wouldn't this method of letting grease seep through press the seal out of its holding lip and just be protected by the metal dust cover, thereby forcing the grease via centrifugal force through the opening and letting the bearing run dry prematurely. Very nice video on the basics of fitting bearing units
Which out of the two should Fixed and Floating bearing types? In Which direction should the sleeve be installed in case of fixed and floating ones. Should they be on one side or alternate sides? How direction of rotation decides the location of lockni
3 For I delivered to you first of all that which I also received: that Christ died for our sins according to the Scriptures, 4 and that He was buried, and that He rose again the third day according to the Scriptures, 5 and that He was seen by [a]Cephas, then by the twelve. 6 After that He was seen by over five hundred brethren at once, of whom the greater part remain to the present, but some have [b]fallen asleep. 7 After that He was seen by James, then by all the apostles. 8 Then last of all He was seen by me also, as by one born out of due time. 1 Corinthians 15:3-8
Very good video on ball bearing mounting methods and maintenance. Thank you for posting such instructive content !
Thank you from Hawaii! Extremely helpful video!
Interesting Video, I'm basically just learning Mechanical Engineering & this is a huge help, now I know how the bearing's supposed to go into the housing & how to tighten it on the shaft, I need more of a slave gear shaft for a project I'm working on, So i can connect a Drive gear to a slave gear with a chain to rotate the gear for an axle on a Motorized Walk behind Snow Plow carriage I'm working on building.
Ok
Amazing! Thanks for the detailed video..
thank u so much.thats what i needed.1 step at a time how to become backyard engineer :D
No
Im a bit split about the explanation about re greasing, allowing the grease to seep through the seals. As these seals are basically single lip clip fit seals, wouldn't this method of letting grease seep through press the seal out of its holding lip and just be protected by the metal dust cover, thereby forcing the grease via centrifugal force through the opening and letting the bearing run dry prematurely. Very nice video on the basics of fitting bearing units
If u buy an engine for example a grinding mill does the bearing need greasing before use or the bearing will be housed after being greased?
Which out of the two should Fixed and Floating bearing types? In Which direction should the sleeve be installed in case of fixed and floating ones. Should they be on one side or alternate sides? How direction of rotation decides the location of lockni
Is the ''set screw'' type the least accurate in term of shaft eccentricity?
Колко трябва да е затегната гайката на конусната втулка в четвъртия метод??
I was an excellent video for me. thanks alot...
what is the housing around the bearing called? the part that you bolt to the equipment?
Flange
Thanks, very useful infos!
Thank you so much!
Audio is not clear.
Turf
3 For I delivered to you first of all that which I also received: that Christ died for our sins according to the Scriptures, 4 and that He was buried, and that He rose again the third day according to the Scriptures, 5 and that He was seen by [a]Cephas, then by the twelve. 6 After that He was seen by over five hundred brethren at once, of whom the greater part remain to the present, but some have [b]fallen asleep. 7 After that He was seen by James, then by all the apostles. 8 Then last of all He was seen by me also, as by one born out of due time. 1 Corinthians 15:3-8