Installing a Woodworking Vice to a Workbench (Irwin Record V175)
Вставка
- Опубліковано 1 жов 2024
- In this video I show how I installed an Irwin Record V175 Woodworking Vice with 7" Jaws to my Workbench. I also add some Hardwood Jaw covers.
Amazon UK Link to - Irwin Record V175 Woodworking Vice:
amzn.to/3vnmQdr
* As an Amazon Associate I earn from qualifying purchases. Thank you.
To Subscribe to the Channel click here: www.youtube.co...
🤝 Help Support the Channel 🤝
☕ Buy Me a Coffee: www.buymeacoff...
*How to Build a Simple, Sturdy Workbench:
• How to Build a Simple,...
* Catch me on Instagram: / phill.wyatt.projects
(Check out the Channel Play Lists):
* Woodworking & D.I.Y:
• How to Make a Simple P...
* Gardening & Plants:
• Gardening & Plants
* Workshop Build:
• Workshop Build
* Restoration Projects:
• Restoration Projects
#diy #woodworking #benchvise
Email : phillwyattoutdoors@hotmail.com
Amazon UK Link to Irwin Record V175 Woodworking Vice: amzn.to/3vnmQdr
* As an Amazon Associate I earn from qualifying purchases. Thank you.
mahy i know your whatsapp ?
TIP: Although many things are described as being Mahogany, it has been illegal to export genuine South American rain forest Mahogany since 1974 (can only be used within the country of origin). Some does get illegally exported into USA and some of that ends up in other countries - UK included, no doubt. The chances are that when a product is described as being made of Mahogany, it will either be Sapele (which closely resembles Mahogany) or from a south east Asian plantation of Mahogany that grows much faster than in a native South American rain forest and does not have the same quality. So, if you do come across genuine rain forest Mahogany, it is either 50-year old stock or illegal. I know it's geeky - but that's me...!
Nice job. Clinical finishing. Lots of likes. Thanks for uploading this video. Wish You A Very Happy New Year 2024.
Thank you very much & Happy New Year!
Great video Phil. Just got this vice and installing today. Have a great day. All the best from Ireland 😎
Cheers John 👍🏻 I like this vice it's been good for me so far.
Nice job Phill, that will make a pleasant change from working at the workmate on the patio !
As they're nice thick hardwood jaws you could consider adding a small dog hole (or two) to enable you to clamp wide boards to the bench top !
Thanks Andy yea I was thinking about adding dog holes although for now I'll leave it as it is because I'm not sure how often I will use them. As you say I can always add them later 👍🏻
Super Phil.Can I kindly ask you to make a portable vice which can be used any where?
Please also make vedios on
Various methods to finish wood work.
Various oils/Finishes in UK
Guide for Jigsaw and circular saw .
Please continue to inspire us.
Thank you for the suggestions and encouraging comments!
New to ur channel man. I like this Irwin Vise. I bought a small Magnusson vise off Amazon and I wish I hadn't now. It's not great at all man. It's got way too much slop in it. The holes for connecting the wooden jaws to it are too close together which means the wood flaps about. I'm thinking of building a new workbench with 2x4's for the top. I might just make a nice narrow workbench instead just for my hand planes and sawing work. I've gotten to hand tools of late and I love working with my new planes. I bought them cheap but i managed to get them set up really nicely. The shavings are so good. The Magnusson vise was supposed to give me the ability to be able to clamp wood so I could plane or saw but it's garbage. I think I'll be investing in one like u have here. Great build but I have to say I LIKE THE WORKBENCH U BUILT.
i SUB'D AND LIKED TOO BTW..
Thanks my friend 👍🏻 I do like this vice. It's just the rite size not too big not too small. It was fairly cheap to buy also and I love the blue colour of it. I think it's difficult to buy the correct vice for your needs. I spent hours researching them before I decided on this one. A 2 X 4 workbench sounds nice and solid. 👍🏻
Cracking video Phill, been putting off installing my clamp until I watched this 😀
Thanks and good luck 🤞🏻 it's been a good vice so far for me 👍🏻
Great video, helped me decide the V175B was the right vise for me, Thank you.
What size coach screw did you use?
No problem. I think they were about 60mm. 👍🏻
got an old 1 of these about to fix to a new bench, thanks buddy
No problem. Good little Vice I think.
I installed same vise on another bench and removed since I like YOUR install way better THANK YOU SIR from West Tennessee!
Thank you glad to help! 👍🏻
Excellent video, Phill. Really useful
Thanks your welcome!
Nice video, mate. Just bought the same one and will mount it like this.
I was thinking about filling the space between the back cheek and the bench, what do you think?
Thanks 👍🏻 yea might be a good idea as saw dust gets stuck down the gap.
Nice. Bought the exact same vice and this helped me out a treat!
Your welcome I really like this vice. 👍🏻
Great video, thank you. Do you have one about how you attached the additional wood under your bench? I'm going to have to do something similar.
Thanks! Yea I have a video about making the Workbench which shows the part where I added the wood underneath. Here is a link to that video: ua-cam.com/video/r0dBMqycNAc/v-deo.html
@@PhillWyattProjects Thank you very much.
Thanks, have bought the same one. Wish me luck😊
Good luck!
Cheers Phil, great work as always (show off. Lol). Did you see that question about my mitre saw that I asked you the other day with the photo link I left also? Cheers.
Cheers Dene 👍🏻 no I haven't seen it did you email me?
@@PhillWyattProjects No, I left it in the comments on one of your video shorts but I can't remember which one now. Lol
Noice Voise!
Yea I like it 👍🏻
What’s the shim (ruler) for?
I used the ruler as a shim to slightly raise the wooden jaws off of the screw thread.
Good job 👍
Thanks! 👍🏻
Nice job 👍
Cheers Richard 👍🏻
Good job! Looks great!
Thanks
Very nice!
Thank you! Cheers!
Really nice job, Phill!
Cheers Nick
Nice job phil
Thanks!
Well done!
Thanks 👍🏻
Congratulations 🎉
Thanks!