How to make Automatic Power-OFF Protection UPS for WIFI Router
Вставка
- Опубліковано 10 лип 2020
- How to make Power-OFF Protection Module Automatic Switching UPS for your home WiFi Router.
Materials Required:
1. Power-OFF Protection Module Automatic Switching Module UPS Emergency 12V to 48V - bit.ly/2O4NWwX
2. 100x60x25mm Project Box Enclosure - bit.ly/3flHXzN
3. DC Power Socket x3 - bit.ly/2ZVuXuo
4. 3mm LED Holder x2 - bit.ly/3eihSjR
5. 3mm LEDs Red & Blue - bit.ly/2ZkkauG
6. 2-Pin Plastic Button ON/Off SPST Switch - bit.ly/3fjflad
7. Three-wire 0-100V Digital Voltmeter - bit.ly/3fe8AGO
8. 1KΩ Resistor x2
9. Wires Red & Black
10. XL4015 5A Power Supply Step Down Module (New Version) - bit.ly/3fphfqc
DIY Tools used:
How to make hot knife cutter - • How to make hot knife ...
Subscribe LahisTech: bit.ly/2JHtlyc
Subscribe for more future creative project videos.
Thank you. - Навчання та стиль
Excellent exactly what I was looking for!!
A proper way to make a router ups is using 12xx series ICs. It will properly cut off power due to discharging. Otherwise the router keeps restarting. I've tried a few setups and found this solution as the best way. Thank you.
You mean 7812 regular ic?
Great project!
do i need to set the constant current to 1A. on XL4015 using for a router of 12V 1A adaptor .
Fantastic man thank you for sharing. I need one of those
looks cool and good quality
Very nice one 👍🏻 but the circuit quite complicated and does not provide recharging for battery.
Thank you very much, this is a good project! 🇦🇷😎👍🏼
I'm needing to build one to power a 5v DC router. Can I just substitute a 5v solenoid
Hola, qué buen video, no entendí algo el voltaje de carga de la batería es 12v? No debería ser 14,1v?
Why did you use XL4015 5A Power Supply Step Down Module when the Power-OFF Protection Module Automatic Switching Module is capable of charging the battery?
Di ata nag chacharge sa battery yan bro... kaya nag aatubili din akong bumili ng board na yan...
Can you make Converter DC Motor to AC motor!
Like inverter from DC to AC.
Can u explain the reason why you used a step down module here ??
does Automatic switching modules itself not charging the battery if it is on main current ??
On the YX850 Power Failure Automatic Switching Standby Battery Lithium Battery Module, the DC terminal has power, it is connected to the battery to charge
How can the battery be charge without a charger and how they know what the voltage to charge the battery?
Hello! Does anyone know of a tutorial on how to do an ups similar to the one in this video, but also charges the battery?
haha u got him. i know but just for me.
you need the yx850 that also charges the battery. its actually the same board but with a big diode in-line of both the positive input. or you can just add a diode yourself 😂
NO, this does not charge the battery when AC power is on.
It's not an optimal setup!!!
exactly
I want to do an ups the same, but to charge the battery. Do you know of a tutorial?
@@CarlosJimenes100 look for Sorin's channel. He's got a better version of a real UPS
Ooo super
Amazing♡♥
I want to do an ups the same, but to charge the battery. Do you know of a tutorial?
The project is very good. What modification should I do if I want to have two 12 V outputs? one for the router of 1.5 A and another of 1 A for the fiber optic terminal. I appreciate any help.
Just add another output socket
Useful good job
Nice bro, and pls if you can make go kart make it
Excellent Idea!
Is it ok with the routers with 12v, 2.5amp !?
I have made a similar setup for my router, for daytime use case. I have two power sources, one js adapter & second is solar panel (18v 8A). I used a buck converter LM2596, a 12v relay and a Diode for reverse current protection. LM2596 for solar panel to step down from 18v to 12.8v. This works great. When adapter gives power, it is default power to the router. When adapter is off (electricity off) then auto switch to solar. However still there's a delay as this video shows.
sir koi muje bna ker de skta hy yr plzzz
i m very need this
koi hy to plz myjse whatsap per rabta kerle
Hi. Can this be reverse ? The main source of power will be the battery and the back up will be the ac.
Great one but all sockets can be a different type to not swap them accidentally.
Very great watching and it's nicely done. However in market for Rs.999 only we get handy UPS for wifi it includes battery inside gives 4 hr backup during power cuts
At the same time it is handy.
Great neatly made !
But i have question
Is it the zero lag switch as i can see a blink when u turn off the ac power
It would be even better if rechargeable li Ion cells used instead of huge battery pack . And also we can reduce the DC connector points
there's a delay due to the relay discharging before switching over... so yeah, the router will reboot...
@@tophlaw4274 any way to avoid this?
@@omshivtiwari a large enough capacitor could keep the power going during the brief outage during the switchover though it depends on how much current your router draws
@@tophlaw4274 my router draws 1A current, what capacitor would make sure the switch won't cause restart of device?
Do we have any equivalent module for YX850 ? This model is currently not available in online!!!
U connected both battery and adapter at same time!
When the adapter is powered battery should turned off.
Is it not getting drained the battery?
Thanks, Will it charge the battery?
what do we need the step down module for? is the battery 24v? Also the LEDs work with 12v?
this is also charging the battery?
That automatic switching module (#0:52) just switch the connection. It can not charge the battery. Btw this video makes me realize that it is better to use 2 power supplies (1 for the battery, another for the router, or other things) in this type of circuit.
Thank you for this video. 😇
why do you want 2 power supplies.. just one big with CC is enough
Right
If your device requires 1A current, use a 2A adapter, this will charge the battery as well as keep the device running.
Greeat! How about Li-Ion version?
This ups can just on router but i have 12v onu device.. can i use 2 device on using this ups..??
Does it charges the battery while connected to the outlet? Does the router restarts when switching between battery powered and outlet powered?
1.No
2.Yes
Sucks
There will be 1second delay, so its not ups, just power backup
Just make battery voltage to adapter voltage. and put it parallel to chager output..thts all. Normally routers work 7-12.5 v. That means a parallel leadacid battery can give 1-2 -3-or 4 hr of uninterrupted power. Im using like this, now its 2 year 🎉 no problem.
can i connect this to the 7ah battery inside a working ups
ie,. the ups charges battery in parallel and getting dc output while power fails..
the charging voltage and output voltage is different.
but if the power goes away the ups battery will be also drained. you will have to implement low voltage cut off also
Dc wall socket to battery shift delay time?
What will happen if battery gets fully charged or deep discharged any protection circuit available?
Will capacitor would be able to stop the router from restarting when switching from mains to the battery ? 🤔 I have 9v 1A rated router.
router resets every power-cut when relay swithes to battery, it can be seen on the video, so you will lost you internet conection for router boot time
can we improve the circuite adding capacitor that will handle power drops?
Hi, could you please share the circuit diagram?
nice idea. the circuit it got also does the same when it switches from main to battery the is blink witch is enought to make router reboot but when it switches from battery to mains its ok. also another drawback is that the circuit doesn't charge the battery
Can I also use lifepo4 32650 batteries for this set up?
Can it works like a ups system???
Does this charge battery as well ??
Please i have some question which i am looking for anyone who could point me in a right direction,i am trying to know something about an inverter/solar electricity generating system for a home or organization,i was wondering if there is some kinda software or device which can be inserted into the inverter/solar electricity generating system,which will make me have some kind of automated central control system on pc or phone to switch the device off from any location and and wouldnt be able to come on if turned on from the generator itself, but can only switch it back on from my device or terminal.
Wow good
I'm making similar box for my 9V router, but will use DC step-up for charging 12V battery from 9V power supply instead of Power-OFF Protection Module. That way 12V battery will be always automatically charged and ready.
yup thats the way to go
be careful. you will want to use a protection circuit as to not overcharge the battery (or just use an off-the-shelf smart lead acid battery charger)... overheated lead acid batteries tend to boil internally & self-destruct (well not explode-explode but their case cracks & the acid goes everywhere)
@@tophlaw4274 not also ideal to always charge the lithuim cells to full. i also have a 8.4v ups pack boosted to 12v. after a few months one of the cell died. the method used in this video is much safer for batteries either lead acid or li-ion, you can swap batteries when needed. that way you can stack up some salvaged batteries and make a 2s or 3s with a parallel of 3 or more. the only issue is the switching of the relay has a delay of about 1 second. an electrolytic capacitor might make the handover seemless.
@@rosekreuze I never mentioned anything about charging to full... just that it's a bad idea to keep charging batteries constantly. Lithium batteries are a different story charge-wise as heat becomes a major factor (moreso than keeping them always topped off)... which the LahisTech's approach will actually do.
Also, lithium batteries require a proper charge voltage that smart charging circuits will provide (including automatic cutoff to prevent overcharging as well as overdraining when it's unplugged) definitely a must have if you're planning to use LiPo/LiIon batteries.
Does it charge the.... battery also ?
Can you even make the battery charge there it self
Hi Thanks for the video . Please let me know whether this unit will charge the 12V Battery, when power supply in on. Or we need to change the battery separately
Battery already a constant ~12v supplying, then why a step down module is used?
Nice project... 1 question .. Can something like this also be made for a NAS as well (i think it would be 19V)
Battery will also be charging when power is there?
Does it charges the battery, when AC power is on....????
Very clean and I have designed my own similar system that uses a battery maintainer to keep the battery charged. Only problem with that ups board is during a power outage the relay switch takes a few milliseconds which is just enough time for the router to reset itself and not stay continuously on. I am going to experiment with some larger capacitors once they come in the mail and see if they will be enough to support the short transfer during the relay switch.
Were you able to maintain the continuous output during switching with the help of capacitors? I was thinking of the same but not sure if it will work. Please let me know if it works and also what size of capacitor did the work.
I hope it will work. I have Big Digital clock. it was on cell. I converted it to AC & Battery. At the beginning it was giving me the same problem. The watch was resetting it self in between changeover But as I added the capacitor the problem was solved.
@@kchandrakant50 which one? detail pls
Have u tried
You can use 50V 2200 uF capacitor. I tried and its not reset it self.
Does it charges the 12volt battery in the process?
When the switch is 'on' in the ups, though the current is also 'on' in our house, does the router works on AC power supply or the DC 12v battery ?
Yss
This module can output 9v for router?
HI, i have netgear router with 12v & 2amp. is this ups will work with my router? the model is netgear nightwak R700
No, the max Amp output on the internal electronics is 1amp. As we add more wifi users on your network, the current draw increases and the unit tries to restart. I have experienced this in this very setup.
Génial. Dommage qu'ils n'en vendent pas des tout fait.
this is just ok for DIY experiment... but
- no recharging
- no low voltage cut off (not sure)
- costs of components including battery will be much higher than commercial wifi UPS with included battery
I want to do an ups the same, but to charge the battery. Do you know of a tutorial?
How many AMP. out put form this build?
Hi. Where I can buy this ready to use item? Thanks
It did restart your modem after you cut off the AC power
And i think you interchanged the input of battery and dc adapter charger
Yep, I like the idea but the way its now made is just totally worthless in my opinion.
1. You don't have the battery charged at all times/ you don't know how full it is
2. There is no protection for the battery to stop when battery voltage is getting too low
3. No (super)capacitors are used to let the modem/ap stay on during the switch.
4 (ish). Battery isn't built in.
@@bjornstevens11 Only useless if it doesn't meet your needs....
1. Just add a Charging Circuit
2. See above
3. Add one
4. Make a 18650 pack and a bigger enclosure
5. Instead of moaning about something that isn't for you why don't you add information instead....As you seem to know what's wrong, you should know how to correct it for ones own circumstance/use. Carry on....
@@sonicmistress Well I try to make something that works and is usefull, the thing he made litterally harms the hardware for making a voltage drop/cutout. This is not good for any hardware. And I will carry on, but people need to know that this is just bad for hardware and not really usefull in my eyes. Good day.
Sir. Can i order that.
Nice bro aap kha rahte ho
Will this contraption charges the battery
Is it okay with 12V 14mah Li-ion battery?
What if you just skip this module and use the battery connected to the power supply. Current will be drown from the power supply, the battery will be fully loaded. When there is the outage battery will be used. Whta is the advantage of this module? Voltage regulator can be used to produce stable 12V. My router works fine for input voltage 9-24 so it has the regulator build-in.
Can we manage the output valtage when at a time the input valtage is increase and decrease occurred. Beside that what is the price and where available the production
Will it charge the battery too or not??
can we use it with li-ion battery
Can I ask what's the purpose of resistor here? Thanks
Hi, i bought a 3s bms for my wifi router, which works fine , can i charge it with 12v charger of router or should i use any charging module.
3s bms should be charged with maximum 12,6v. So 12v will be better for more battery cicle life.
@@muflatu ok .so 12v is enough
@@chandrasekharguntupalli4079 yes. safe
@@muflatu thank you. Bro..👍❤️
abi kaç volt kaç amper çektiğini yollasak yaparmısın ne kadar a yaparsın yollarsın.
How many Amps does the circuit outputs?
May i ask the size or red and white wires please?
Can I use lithium batteries?
whether the battery can be recharged too
The router restarts when the AC voltage is cut. Not good.
How do u charge battery...??? need separate charger for that...?
you dont need the step up or down boost converter, jus only the automatic switching module
I agree
Does the automatic switching module also charge the battery my friend?
How the battery charged?
Thanks a lot for the wonderful video. One small clarification instead of the large 12 volt battery can we use the smaller one like 18650 and try to fit it in the same compartment...
Yes, but with 18650's you can't run this long time.
@@LahisTechLT Thanks for your quick response. We are having a DG set, the problem that I'm facing is whenever there is a power drop, the DG takes few seconds to start and during that time the router restarts. So my requirement is to maximize the usage of direct DC from the Router adapter.
Sir, I'm a noob in this. So plz enlighten me.. why can't we use laptop battery directly between router and adaptor With over charge protection..?
Does this charge the battery??
How to recharge the battery?
Can I charge battery with this adapter?
How about 12v batery charger? It will discharge..
Hi, when the power goes out, the voltage drops to 6v and the router does not turn on.
bad battery
This is not a router UPS as the power will be cut-off during the switch over from mains to battery source (a relay takes a too long time to switch). The only design that works for true uninterruptible power is a design where the power output is always powered from the battery source (the battery being charged with a control circuit when mains power is available)
3x 18500 cells would be more than enough for this project ! I have built mine with 3x 2800 mah cells and it powers the router for 12 hours. And its waaay more compact
Please give battery and router information you have used
How I can get this thing....I need this
I want to buy it
Bisakah jika aki tersebut diganti menggunakan baterai 18650 dan apakah jika rangkaian seperti itu saat terhubung ac 220 v otomatis aki akan mengisi ?
Where i can buy this?