Це відео не доступне.
Перепрошуємо.
All Canon G Series Printer Empty Pipe Solution Beginner's Guide with English CC | INKfinite
Вставка
- Опубліковано 13 гру 2020
- The easiest way to fix your Canon G-series printer empty hose pipe problem!
Learn more about printer repair on our UA-cam channel: bit.ly/2JukKAV
This video tutorial is applicable to all Canon G-Series printer models. We hope you enjoy our free printer repair tutorial!
🎬 Other Videos to Watch:
➡️ How to Perform Ink Flush on Canon G2010 without Computer
Video Link: • How to Perform System ...
➡️ How to Fix Canon Pixma Printer Error P22 Support Code 5011 5012
Video Link: • How to Fix Canon G2010...
➡️ How to Solve Canon Pixma Printer Error P08 and Support Code 5200
Video Link: • How to Fix Canon G2010...
📺 Subscribe to our UA-cam channel and get the latest updates!
Subscribe - bit.ly/3pVCKnI
🏆 How I Rank My UA-cam videos using these Amazing tools!
➡️ TubeBuddy: FREE UA-cam SEO Tool (Chrome Extension)
Install TubeBuddy here - bit.ly/3lL7Cb6
➡️ vidIQ: FREE UA-cam Target Keyword Tool
Install vidIQ here - bit.ly/3yzE6ZE
👤 Connect with Us!
Facebook Page - bit.ly/3lFQ9B1
UA-cam Channel - bit.ly/2VBGjFp
Disclaimer: Some of these links go to one of my websites and some are affiliate links where I'll earn a small commission if you make a purchase at no additional cost to you.
God Bless you sir, I did not understand your language but your clear demonstration was perfect,
for stopping the flow back of the colors I used some blue tack in the holes soon as i removed the syringes.
Glad it helped! 🙂
Sir paano na resolved ung G1010 ko kapag nag print... parang may kumakayod sa papel ?
Thank you! like sierakh8249 said, I can't understand but your demonstration explained everything. Unfortunately I already did the ink flush and it did use a lot of ink. Question, where did all the ink go? God Bless!! Blue@@INKfinite
@@bluegarren9361 It goes into some sponges at the bottom of the printer. If you do a lot of ink flushes, those sponges will get full and the printer will throw an error (absorber full). At that point, you should either replace the sponges, or run the tube that feeds them out into a separate container (thus avoiding the sponges entirely). You will also need to reset the absorber setting (so the machine doesn't think they are full...otherwise it won't print anymore once this error is encountered). This requires a special set of button presses to get into maintenance mode. Check for other UA-cam videos that cover this procedure.
I literally watched half the video before turning on CC.... I was able to understand exactly what you were explaining!!! You demonstrated every step SO well that anyone from any language should be able to follow along! You are awesome!!! Thank you!!!
Salamat po, ito pong video ang talagang hinahanap ko para maayos ko na Ang printer ko nang Hindi na ngbabayad pa sa technician, thank you po.
malaking tulong ang piakita nyo sa mga kagaya ko a walang alam sa printer.. salamat po
Thank you for watching! :)
salamat!! naayos ko yung printer namin😇
To move print head to middle just long press STOP button twice while opening maintainence lid. First time long press will make print head go to left edge. If u do it second time print head will go to it's resting position (right side) and then rest in middle like u did. Mine is G3000 series and did work this way.
In the video the printer is turned OFF. So there's no way you can move it using the STOP button. It's not recommended to do the procedure while the printer is turned ON to avoid any possible damage to the timing belt and cr motor. And that's the reason why we showed it in the video how to move the print head carriage manually
thank u so much po..nakatulong po ang video niyo para maayos ko ang printer ng pamangkin ko..Godbless po.
Helped a lot. Thanks for this very informative and helpful video. Kudos
You're welcome!
Ty Thank You Salamat Boos your the Best super linaw ng paliwanag.
Yown oh... Thanks for the tips.. thanks for sharing
Your welcome! Thank you for watching
Naka tulong po talaga ng malaki. Thank you and God Bless Brod!
Maraming salamat po
Hi, well explained thank you. May i ask how about E05c error?
thanks sir sa pagbahagi ng inyong kaalaman helps a lot..
Happy to help! Consider subscribing to our channel to get you updated :)
katatapos ko lang gawin, sobrang helpful. thank you soooo much po tlga
salamat bro. naubos ko ink ko sa pagsasagawa ng ink flush. salamat sa video mo
You're welcome! Consider subscribing to our channel to help us grow and to get you updated
thank you sa tutorial na to. naubos ink ko kakaflush.. eto lang pala ang solusyon!
You're welcome! Consider subscribing to our channel to get you updated ;)
Galing nyo kapatid, me natutunan ako sa yo, salamat ng marami, God bless!
many thanks my dear friend
شكرا جزيلا" صديقي العزيز
Salamat brod malaking tulong itong tutorial mo.
Thank you so much from North East India
You're welcome! Stay connected to our channel to get you updated ;)
thank you so much ! bumalik yung ink sa pipe pero after that pag nagpiprint blank paper lang so i cleaned it then deep cleaned and nozzle checked it then i encountered another issue yung black nagiging blue so i had to do ink flush and gumana na 😁
You're welcome! Consider subscribing to our channel to get you updated 😊
I do not understand but i am following.
thank you from INDIA
nagdahil sa video nyo sir malaking tulong talaga sa akin lalo na canon printer nmin. lage natutuyuan ang hose ng printer nmin mahal p nmn ang bayad pagdinadala s shop. ask ko lng sir di ba naunlock yong white n yon so kong tapos n need pa bailock yong white? sa akin kc binalik ko. thanks
Very helpful po Sir. Maraming salamat po
Our pleasure to serve! Help us grow by liking the video and subscribing to our channel
that's one of the advantages of Canon and HP madali imaintain...pero napakamahal ng ink cartridge ng Canon G series printers...remember masisira at masisira lahat ng printheads at certain time kaya bago bumili alamin muna presyo ng cartridge at matutong mag-refill on your own. P3,816 per pair ink cartridge ng G series printers at bihira din nagbebenta ng basyo nyan
Very helpful thank you po. Paano sya ibalik tulak din ba?
sobrang salamat lods! nkatipid ako ng 2k para lng dto. dahil jan subscribe ako sayo! solid solid
New subsrcriber po .. saLamat po sa video nyo na ito .. Ganitong ganito ang nangyari sa printer ko ..
Our pleasure to help! Consider subscribing to our channel to get you updated
Hi. I completed all the steps and the ink appears to be on the tubes but it's still not printing right. Any recommendations?
Thank you!!!!!
Welcome!
I fixed mine in my garage with a sledgehammer... !!!
salamat dahil sayo naka pag negosyo ako hehe
I have G1000 replacing my old epson L300. I never buy canon again, my L300 was problem free until I retired it. Everytime I want to print with G1000 (once a week approx.) I have to check the ink or clean printer in the utilities software. It is slower btw compare to L300 which I found instantly to print.
What did you do to keep the ink from backflowing back to the tanks? I didn't understand what you are saying, and understood using the syringe to pull the ink into the tubes, but no following what you did to prevent the ink from backflowing. Thanks
Me too I didn't understand how he prevented it from backflowing but I saw him opening blue lid before removing a syringe then it didn't backflow
Thank you, it help me so much being a struggling student🥰🥰
Happy to help!
very informative thanks for sharing po
Thank you too
Thank you master❤❤
No problem 😊
May God bless you.
Malaking tulong to sir maraming salamat sa videos mo
Thank you for your feedback! Consider subscribing to our channel to help us grow and to get you updated
Ilang milliliter ba yang gamit na pang sucking ng ink sir?
Really Semma use for myself. Thank You Brother. God Bless You.
You're welcome! Consider subscribing to our channel to get you updated 🙂
Any idea what diamaeter that syringe was. Im trying to buy one in amazone that will fit wihtout hacing to cut it
Nakasave ako ng 500 pesos dahil sa tutorial na to! huhu thank you so much po! 😇
Glad to hear that! 🙂
ask lang boss, same lang ba ang printer heads ng mga GSeries
Thank you
I would like take all videos of u about all printers how many printers details u can provide?
Taking our video and re-uploading it to UA-cam or other social media site is strictly prohibited. If found guilty, you'll get copyright claims for doing it! You are NOT allowed to take any videos from this channel
@@INKfinite sir tanong ko lng pwedi b akong gumamit ng ink n hindi brand ng canon
Thank you po Sir.
salamat po.may natutunan na nmn ako
hello po. nakita ko po yun vedio nyo sa youtube. sana po may vedio din po kayu panu ayusin ang canon g1020 error code 5100. palagi po ganyan. 2 or 3 pages palang po na piprint. error na po kaagad.
Salamat sir! 😊❤
Salam! Thank u brother!
Welcome!
Thanks a lot!
You're welcome! Consider subscribing to our channel to get you updated
Ano po naman ang problema na pag nag print canon ts8230 ang black ink po nagkakalat sa side po ng a4 paper
Excellent video, but my Tagalog is ... NIL ;-) Plenty of useful visual info though. Kindly redo a shorter video in English or add subtitles, that would be really great. Thanks again
Thank you! We'll try to edit the video and make it shorter. The reason the video is too long it's because we explain everything for beginner's to know
@@INKfinite With the new English subs you just added (very fast thanks) , no need to edit the video: it is perfectly clear and explanatory as it is. In fact, if everybody was as clear and patient as you are, UA-cam would be a much better place ;-)
I need help locating the waste ink tube so I can route it to a tank.
Hi sir. I bought this Canon G2010 printer 2 days ago and I facing an empty ink pipes problem just like in the video...is this normal for a newly bought printer?
Rhank you sir
You're welcome! Consider subscribing to our channel to get you updated 😉
Thank you so much. It works 👍🏼
Glad it helped
TY boss
Salamat po sa tutorial hehehe nagamit ko din ito at effective talaga! 🙏
It's working thanks for this video
You're welcome! Stay connected to our channel to get you updated ;)
Hi
I have pixma g2020 canon printer showing 7800 support code need solution please
Thank u
No problem
Kuya Ilan ml po Yun syringe 💉 na need bilhin SA mercury drug store for this po
Hi fans
Thank you so much!!! big help talaga!
You're welcome 😊
Idol super idol
very well explained.. mostly epson brand lng na troubleshoot ko, additional knowledge po ito. Thank you. like and subscribe button smashed already!
It sucked up when I used the syringe but when I run the printer it’s still not sucking up ink on its own. How do I fix this?
Mas okay po ba yung pag gamit ng syringe kaysa iflush ink po sa computer printer settings?.
thanks po sir
Good morning Master, napanood kona po yang trouble shooting video demo mo, at ianapply ko sa g4770 with individual cmyk ink lock, pero pag tinatanggal ko ang syringe nag ba back flow pa din, Iba po ba ang pag aalis ng bubbles sa g470? Salamat po sa technical advice.
If after doing this your printer still wont print. You should replace the printhead of the printer. Usually you replace it every 4 years specially if you use it often.
Thank you po. Ask ko lang po kung after ilock . Pwede ng iclose at kusa ng babalik sa position yung host holder?
English narration would have helped a lot..
nice
salamt bro, di mo na ibalik sa original yung printer head, eh tulak ba yun pa kanan sa original na pwesto nya? tpos automatic maglock ba yung puti na na unlock mo?
Share ko sa anak ko.kasi may ganyan kami
Share it to your friends and family
goodmorning sir, tanong kulang po, ano pwd gawin kung matigas naho i push ang power button ng canon g1010? sakanat po
Hi. Ano po pinagkaiba nyan if mag ink flush nalang? Iba pa po ba yon? Thank you 😊
hello may I ask on what to do with my g2010 yung print nya po e may malalang guhit guhit tas malabo
Big help sir ano po ung sukat ng syringes? many thanks more power!
Hi sir, yung gi-790 ink ba pwedeng gamitin as substitute sa gi-490 ink?, wala kase mabilhan na gi-490 dito sa Pilipinas para sa aking canon pixma g3415 printer model. Printer bought in Saudi Arabia
Great🎉❤
can i reuse injection ink
Mam may manual code lang jan para mag ink charge. No need baklas mode. Pero jan din ako galing kaya ok din hehe.
LOL. Alam na alam namin lahat ng manual code for Canon kami pa talaga tuturuan mo. Tingin tignin ka din ng ibang videos namin para makita mo at isa sa mga videos namin ay yung manual ink flushing for Canon G-series model. Alam mo ba ang dahilan kung bakit hindi namin nirecommend yung ink charge sa video na ito? Minsan kasi panoorin mo muna yung video at unawain. Ink charge ka ng ink charge tapos magsisisi ka din sa huli hahah..Halatang bagohan ka palang pagdating sa printer repair
What can l do the ink is running back?
I have a G3200 & going to SCRAP! Been a NIGHTMARE! WOULDN'T HAVE ANOTHER IF CANON WANTED TO GIVE IT TO ME!
Good eve sir ask ko lang ano kaya ang problem kapag steady lang ang light both black and color sir canon mp237 po ang printer
I should have watched this video first, nag ink flush ako..ayun naflush nga ung ink...grabe andami naconsume...huuhuhuh... sir ganyan din po printer ko,, nagbebenta po ba kayo ng pang refill ng Cyan, magenta at Yellow? hm po? @INKfinite
Ubra ba to sa bagong model g4770 .. Kakabili ko lang po
Good eve sir. Possible din po ba itong reason na hindi nababasa ang cartridge? Error code na lumalabas sa aking printer ay error 1472 pero yung pipe nya ay wala pong ink. Possible po ba na pag nagawa ko itong steps ay mabasa na ang cartridge?
sir pano po ayusin ang canon g3010 na naka orange light E15cb error code
Hello po sir, paano po ma solve ang support code 7500 ng canon G2020...thank you po.
how do you clear error 5b00 on canon G4400
We also have a video on how to fix error 5b00 on Canon G4400. Just click the video link below
ua-cam.com/video/GPFPkm9YjU0/v-deo.html
Meron po ba kayo about sa G4010 error B202, B203 and B205?
Do you accept Canon g3000 printer repair?
Canon g1010 new head replaced.but colour print very dull.many more time flushing and nozzle checking.but no way the dark print.ple any solution ur side
Just use original inks from canon to maintain the quality printout