I am so happy you made this vid! I know this is my issue. I let it sit too long and when I opened the printer up I can see the black is in the tubes but the color isn't. So the printer keeps giving me an error. I was looking at the empty tubes with full tanks thinking..... "I am betting it needs to feed the ink down the tubes and isn't. Yet, I wondered... why did it do it the first time I used the printer when it was new... and it isn't doing it now? I'd imagine printer engineers would think of this issue and implement a ink flush routine to ensure the ink was being fed.
And after pulling the ink, a few cleaning + nozzle check + deep cleaning + nozzle check + repeat.... This Solved my problem! Don't forget to open the ink covers, So ink being pulled in through tubes, doesn't create negative pressure. Like @CaseyC Benn (I too had his train of thought). Glad I checked in ever so reliable people from youtube!
You need two people for this method to work and it's very messy trying to block off each color while aspirating - I just use blue tack ;) and a set of disposable gloves. takes 2 mins.
Canon G2000 To check the remaining ink level, visually inspect the remaining ink in the ink tank. If the function for remaining ink level notification is working and an ink tank is refilled before the remaining ink level reaches the lower limit line shown on the ink tank, a significant error may occur in the accuracy of remaining ink level notification function. If you want to refill an ink tank before the remaining ink level reaches the lower limit line, be sure to follow the procedure in the manual. If printing is continued when the remaining ink level is below the lower limit line, the printer may consume a certain amount of ink to return to printable status and may also become damaged.
@@Prem_infogate Don't let ink level go near the bottom line as then the ink tubes will run empty because of no ink pressure and will damage the print head/cartridge
Boss nalaman ko po dito kung ano yung mali kong ginawa, hindi ko po binuksan yung cover ng ink kaya bumabalik po pero, nung sinunod ko na po kayo at binuksan ko na yung cover, umapaw naman po tulo ng tulo tapos naubos na po yung ink namin. Bakit po ganun? This video helped me to know what I've been doing wrong which is not opening the cover of the ink that is why the ink goes back but, when I followed these steps and I opened the cover, the ink overflows and leaks I can't control it and our ink was empty then. Why did that happen?
While pulling colour ink, you are opening the right side colour tank cover again and again..but never close the cover. How open the cover when you already opened it!!!??
@@WorkPointComputer I was able to fix it. P08. Turn on Press stop Press 10x til number 10 is shown Then wait as it will make a sound for few minutes. You'll know it's over when number 1 is indicated Try to print out. 👌
@@SintechWorld Open the latch and let the colour go back to the tank . no need to use injection . Just lock the head to normal and hold the stop button and count the blink for 5 times and leave it printer will start its operation it will take atleast 15 to 18 min . And you will notice pipe getting filled with colour. Keep in mind before doing ink level should be proper. 100% it will work
Sir I have tried your steps it works but it was showing error to my printer only black colour was printing other 3 colours were not printing PLEASE help
Sir baki sab galat bata rahe u r best u saved my 1000 rupes
Welcome brother
@@WorkPointComputer ভাই আমি লক করার পরে ও কালি টানতেচে না।
কালার কালি
Why
Hello I tried using this method but the ink doesn't want to reach syringe and the air always comes back even if I opened the tank @@WorkPointComputer
Incredibly useful for those of us that prefer to do these kinds of maintenance by ourselves, worked perfectly. Thanks
Welcome
Even after doing the trick suggested by you, two pipes i.e. black & yellow are empty. What to do ?
Head clean
I am so happy you made this vid! I know this is my issue. I let it sit too long and when I opened the printer up I can see the black is in the tubes but the color isn't. So the printer keeps giving me an error. I was looking at the empty tubes with full tanks thinking..... "I am betting it needs to feed the ink down the tubes and isn't. Yet, I wondered... why did it do it the first time I used the printer when it was new... and it isn't doing it now? I'd imagine printer engineers would think of this issue and implement a ink flush routine to ensure the ink was being fed.
And after pulling the ink, a few cleaning + nozzle check + deep cleaning + nozzle check + repeat.... This Solved my problem!
Don't forget to open the ink covers, So ink being pulled in through tubes, doesn't create negative pressure. Like @CaseyC Benn (I too had his train of thought). Glad I checked in ever so reliable people from youtube!
You need two people for this method to work and it's very messy trying to block off each color while aspirating - I just use blue tack ;) and a set of disposable gloves. takes 2 mins.
Thanks for posting such use full info, the last time i used the INK FLUSH function it drained lots of ink to waste
Wlc bro
@@WorkPointComputer please help my canon G2411 is not working it new it shows 0 with ink sign on top what can I do
Use printer software and charge ink
@@WorkPointComputer how do I charge it pardon
@@WorkPointComputer do u have vedio
it looks easy thanks. btw , what size of syringe do u use ? i want to buy it
2.5 ml
before doing this, try pushing the STOP Triangle button for 5 seconds, like you did during setup!
how do that?
Try my video
@@WorkPointComputer i filled my canon pixma g1400 tubes with ink thanks to syringes.but the blue color still isn't printing.what should i do?
Yes, I did this, and it worked for me. No need for syringes. But I agree that syringes may be needed if the Stop method does not work for you.
Why use syringe method you know ?? Its save your ink ,
Does the removed ink can be put again/ or can be used again?
Yes re-use
I missed put the magenta to Yellow..?
Is there anyway i can fix it?
Yes
What size syringes work for this? Assuming nozzles differ?
2ml
@@WorkPointComputer is that the nozzle width needed?
@@TRIBULAR2000 use 2ml
how did you pull that printer head? mine is too hard im afraid I might broke it
It’s so simple
First the lock is need to be released
my tubes are empty as well.but everything is fine it's printing but with blue color absence.can you help me with that?
Yes same here
Do we have to perform these steps when printer is on??
Please reply
No Printer off
Thank you for clear information.
What size of the syringe that you used?
2.5 ml to 5ml
Very helpful. Thank you brother👍
perkongsian yang menarik ✔️
Canon G2000 To check the remaining ink level, visually inspect the remaining ink in the ink tank.
If the function for remaining ink level notification is working and an ink tank is refilled before the remaining ink level reaches the lower limit line shown on the ink tank, a significant error may occur in the accuracy of remaining ink level notification function. If you want to refill an ink tank before the remaining ink level reaches the lower limit line, be sure to follow the procedure in the manual. If printing is continued when the remaining ink level is below the lower limit line, the printer may consume a certain amount of ink to return to printable status and may also become damaged.
What you meant by damaged if ink filled after the tank empty. Is this will effect the working of printer in printable status?
@@Prem_infogate Don't let ink level go near the bottom line as then the ink tubes will run empty because of no ink pressure and will damage the print head/cartridge
can i reuse it ink if i use separate injection
Any
Can i pull the ink pipes together with the cartridge without damaging the pipes? Im afraid of pulling it.
Thanks a Lot! You’re a lifesaver!
दोनो एक साथ लगा सकते है क्या
What is the size of injection?
2ml
*Best solution just hold cancel button for 5 second and ink will go to writer head* it works
Yes , but you lost many ink
@@WorkPointComputer no worry bro
thank you very much
Welcome
Nice thanks
Welcome
V useful video thank you bro.
I own canon G4010 printer, the printer itself has a "INK FLUSH" function to flush the ink for individual colour in 10 minutes
Does this work in new cartridge?
No
Does it have to be on?
No
Does it also work in canon g1000?
Try this trick
Boss nalaman ko po dito kung ano yung mali kong ginawa, hindi ko po binuksan yung cover ng ink kaya bumabalik po pero, nung sinunod ko na po kayo at binuksan ko na yung cover, umapaw naman po tulo ng tulo tapos naubos na po yung ink namin. Bakit po ganun?
This video helped me to know what I've been doing wrong which is not opening the cover of the ink that is why the ink goes back but, when I followed these steps and I opened the cover, the ink overflows and leaks I can't control it and our ink was empty then. Why did that happen?
This is ink control lock
How u Sir u brought miraculous manual resolutions to my printer
what
What if it is not sucked by syringe ? I tried but nothing moved.
Check ink pipes . And Clare jam
Thanks
Thank
Welcome
Bro where to get that syringe
Medical
Thank you.
Welcome brother
Thanks vaia
Welcome
It actually works
☺️
Thankyou man you saved my 600 rupees
While pulling colour ink, you are opening the right side colour tank cover again and again..but never close the cover. How open the cover when you already opened it!!!??
It's open to lock pipe air. And cover close to normal mode
Very helpful bro....thanks a lot
Hi.sir. i'm trying to pull the hose together the cartridge but it stock and can't pull in the middle how to fix it...please.thank you...
Use lock . And follow my video stape by stape
Thank you sir...
it's worked....
welcome
What size of syringe is that?
It's 2ml size
Thank you sir!
U r most welcome
tnk u so much
Anung cc po gamit niong injection?
2.5 ml
After doing this, my printer won't recognized my cartridge. What to do?
Open and clean cardage
Thank you!
What if ink is not moving after flushing using syringe?
Connect your printer with computer and check monitor status what is support code show
@@WorkPointComputer I was able to fix it. P08.
Turn on
Press stop
Press 10x til number 10 is shown
Then wait as it will make a sound for few minutes.
You'll know it's over when number 1 is indicated
Try to print out.
👌
Great
just as soon as I close the cover the in goes back. Help!!!
To open cover its release, so dont open , follow full my stape
Sir Pipe MeTph Ink aa Gaye Hai Pr Nozzle Check Mai Sirf 2 Yellow Hi Colour aaraha hai Plzz help
Head clean kar ke dekho
it works. Thankss
Solved but after few print again same air leak problem, how to close permanently????
Check cardage head and pipe likage.
@@WorkPointComputer all reset but again It's happening, have to replace pipe or cartridge head?
@@WorkPointComputer max time cyan color alone having air leackage problem, rest is OK
First check pipe properly . Then pipe is ok so next stape change head
@@SintechWorld Open the latch and let the colour go back to the tank . no need to use injection . Just lock the head to normal and hold the stop button and count the blink for 5 times and leave it printer will start its operation it will take atleast 15 to 18 min . And you will notice pipe getting filled with colour. Keep in mind before doing ink level should be proper.
100% it will work
प्रिंटर में लेवल काला रंग ही मौजूद हैं, Cyan , Magenta और Yellow रंग नहीं है। क्या 7 बार blinking बंद हो सकता है। बिना कलर रंग डाले हुए।
Yes its possible
@@WorkPointComputer Please 🙏🏻🕉️ make a crystal clear video on this 7 times blinking light topic.
Is this the manual hack of an ink flush? I wasted so much ink because of that ink flush I did. Ugh.
☺️
Hi sir! Pwede po ba 3ml yung syringe?
2 ml
Use 2ml syringe
anong syringe po pede
Sir I have tried your steps it works but it was showing error to my printer only black colour was printing other 3 colours were not printing
PLEASE help
Please head clean to solve your problem
Thank you sir
wonderful hack
☺️
super cute
Aisa करनेसे ink और वापस चला जाता है.Cartage खराब होणे से भी ink empty होता है. ये process कब use करे इस्का सही हल कोई नहीं जाणता.
JUST PRESS HOLD THE RED CANCEL BOTTOM TILL 5 TIMES ORANGE LIGHT BLINK AND RELEASE IT PRINTER WILL SUCK INK AUTOMATICALLY.
Model number
worked for me. model G3501
2ml Lang po ba ng syringe Ang pwede
2ml use
Yellow pipe me ink nahi aa raha hai.
Mera 1baar xerox hone ke baad.phir se pipe se ink chale gye .kuch solution bataye sir plz.
Head clean karo.
Boss ung saakin po ginamitan ko ng syringe tumaas din po ang ink kaso kpg inalis na ang syringe bumababa din ang ink paano po kaya un?
I can't understand your language
@@WorkPointComputer he said that: he uses a syringe to pull the ink but whenever he remove the syringe,the ink goes back, how ca we fix it"
Ok please follow my stape, don’t close ink tank cover
Ano pong syringe ang gamit?
Gumagamit ang EM ng 2 stool syringes
anung size po syrine
2ml
Sir all works done then again colour return back
Most welcome
I tried it but the air keep coming back
use liver lock
Black color nhi nikal rha h Kya Kare btay plz
Pipe pe ink he ??
Nhi h
Mera trick apply karo
लाइनिंग आ रहा है इसका कोई सलूसन है
good luck
as always, it didn't work for me
Bar bar air aa rahi hai sr
3 baar m saari ink pee gaya mere printer 😭
Iss prosse me ink kese peeyega ??
My printer ink pipe in air
Ok
Canon g 3000
@@Awadesh634 same trick apply it's working
Contct numbar aapo
Check description
I have the G5000 series. This is the worse printer I’ve ever purchased. Never again.
Neye aa raha phir bhi
Kiya horaha he?
Thanks you very much
Thank you very much