CAMSHAFT Sensor how to change on vivaro ,trafic, primaster
Вставка
- Опубліковано 10 вер 2024
- VIVARO TRAFIC PRIMASTER Quick and easy swap of camshaft sensor on vauxhaull vivaro 2.0 cdti. also similar M9R engine in the renault trafic and nissan primaster etc. diesel engines.
Thanks saved me a chew on with the garage!
I have weird problems in my mr9. After the injector replacement it has had so many problems. At the first few wires had cut then the fuel filter leaked air and now it starts cold just fine but shuts down when the engine is getting warmer. About after 10 minutes. The Camshaft sensor, turbo solenoid, and turbo intake sensor are changed. No more air in the fuel system. Just wondering what comes active when the engine is warm?
Techies,can you help,,my 2009 2.0 vivaro cdti 90 bhp has intermittent P0201 cylinder 1 open.garage checked wiring, charged me £450 for new jnjector ,still the same.Above 3k revs,Engine stop light jn red & P0201.Engine has slight vibration and delayed start,,all symptoms started at the same time.Ive read crankshaft sensor can do this ? Any help appreciated ,,missus nipping my head about the cost,,you know the drill, thanks,George
The best scan tool for a Renault Trafic is a can clip. You can buy them off Ebay.
When a error code comes up the ECU stores it keeps it to memory.
With the can clip you connect it to the OBD then a laptop and go in the software and it will tell you the faults that have come up.
Other Scan tools wont usually show any codes that have come up unless its a real expensive scan tool then Mabey it will.
Can Clip is made for Renault you can do a whole bunch of test and see the readings etc.
The Sensor underneath the engine at the back is the crankshaft Position Sensor.
The Sensor on top of the engine under the air filter box is the camshaft sensor.
The crankshaft position sensor monitors as a multifunctional sensor used to set ignition timing, detect engine RPM.
The camshaft position sensor is used to determine which cylinder is firing to synchronize the injector firing sequence.
They Are Both Important Sensors they both send readings to the ECU
If Some Sensor is faulty usually a yellow light comes on with lines the glow plug light and service light its electrical like a sensor.
Why did you change this sensor? Is it because the engine is running late or the car takes a long time to turn?
Error codes and wouldn't start up some times.
I had an injector done recently, drove fine after, but a day later I had a light come on the dash the squiggly yellow one with the box around it, it went away after but now van wont fire up, could it be cam sensor. Al
Yes.
Mine cranks no start
Had computer on .. camshaft sensor defect.
Hi mate, I have the lights on the my dash, with the coil, and symbol with car light up, would I need to change the camshaft sensor like the video, and maybe the glowplugs?
And would I need to plug into the computer to wipe off memory?
Thank you, bud
Adam
Aren't there two camshafts and hence two camshaft sensors? If so where is the other? Thanks
Would one if these cause no start
Hi.what year model vivaro is in the video here? I heard that in order to replace camshaft sensor for vivaro 2001-2013, you need to get under the van and replace the sensor from underneath. Please explain if you can. Thanks
It's a 2008 2.0 engine
Is it in the same place on a Renault traffic 06 1.9cdi
Steve.
I have a 05 plate Vauxhall vivaro !
Is the cam sensor it the location you have described ?
🥂
What was it like befor the cam senser change
Thanks!
Can you pleas tell me where is a crenk shaft sensor for OPEL vivaro 2.0DCi M9R 2011 and thank you
Think it's the same engine
WTF! I have always unplug the whole frame. That time and nerves what it has taken!!!
Engine won’t kick into life just died :( 61 plate vivaro ... is it worth replacing crank sensor as a maybe??
Is it as easy as this vid ?? Or do you have to go from underneath like a comment said above??
Thanks in advance
Mechanics and "maybe" usually mean one single thing... A lot of money! ;-)
Save yourself the trouble and get a proper diagnostic from a reputable professional. You'll save some money and a lot of time. Instead of trowing random parts in the believe it will go away.
Regarding the second part you've just watched the video!! Come on!
Hi mate thanks for the great video. Can you please tell me if you have a electric diagram for this van please? Is because I have a 2012 2.0 vivaro with ecu no connection..
Thanks and sorry I don't.
so how do you know you need to change sensor.
what manifestations do i look out for
nice job.
Engine warning light and a code.
Disrupted Driving and offcourse the dashlight. But you have to read the code with a diagnose. It's like 40 Pounds(diagnose).
Another symptom of a failing camshaft sensor is experiencing constant disruption while driving. If you are experiencing symptoms like frequent stalling, poor idling of the car at 500 to 600 rpms, a massive drop in the rpms slowing down the car to a crawl, a noticeable drop in engine power, poor mileage, abnormal acceleration activity, frequent stumbling, etc., it probably means you have a failing camshaft sensor that needs immediate attention. If you are experiencing any of these symptoms, it is best to seek a mechanic before the situation gets worse and the car gives up, refusing to start at all.
Marius Voicu Iv just bought a Nissan primastar and a couple weeks later she dropped in speed and only goes 40mph any idea why it is doing this please
cheese
2.0 engine ?
Robertas Mataitis yes it is.
way Du you change camshaft sensor vat woes the problem??
@@Sparkplugsteve What was the issue? My 2ltr TDI starts then cuts out immediately
@@TravelistUK I had that issue and I had a camshaft sensor code but that wasn't the fault. I was losing fuel pressure. Under the bonnet the should be a hand priming pump. It's a rubber bulb type primer. Squeeze it repeatedly until its firm then start. Also handy to have someone squeezing while your cranking.
@@Sparkplugsteve the engine light is lit up on my dash so my issue could be cam sensor
Just got quoted £400 for this
Ouch that's steep. Iv just saved you a fortune if you swap yourself 😁
@@Sparkplugsteveyes you did thankyou ....i did it myself right after this video , I've subscribed and shared 👍
Where on a 04 reg is it as engine looks different