Sorry for my novice question but is the water mist to help the glue - does the gorilla glue need a little water? Do you think this glue would work for very thin (0.6mm) veneers? Thank you!
Yes, Gorrilla Glue needs some water to be added. I’ve been told by a friend that it foams up a lot more if you added a bunch of water (maybe like using a sponge). You’ll have to practice to get the right amount for your project. This friend introduced me to a fine mister used with plants, that is what I’m using in this video. I spray the air above my work as it nicely helps distribute the mist instead of directly spraying the veneer. I recently say David Bedrosian on IG use Gorrilla Glue on thin commercial veneer (and with a wet sponge) and he looked super happy with the results, but has t applied finish yet and it looks like there was some glue squeeze out through all the pores. Here is a link to that video: instagram.com/p/CwunnozgOJI/?igshid=NzZhOTFlYzFmZQ== Inquire with him as he has yet to post a follow up video.
I'm curious why you went with a polyurethane glue rather than a veneering glue.. I've only used the polyurethane glue for oily woods such as teak. I know nothing about vacuum bagging or veneering. Thanks in advance.
Great question. There are a lot of veneer glues that are made for commercial veneers which are considerably thinner then this shop sawn veneer. I actually bought some veneer from www.veneersupplies.com and got it out to use on this project and realized on the label that it wasn’t meant for this thickness. I then started studying what Philip Morley does since he has recently been doing a lot of shop sawn veneer glue ups. I checked in with him and he uses Gorilla Glue. I got some good tips from him about wrapping in plastic, wearing gloves, using a fine plant mister, and misting the air above not spraying the panel directly. I’m pretty sure he learned a bunch of these techniques from Tim Coleman. I definitely not a glue nerd but I think it comes down to the amount of solids in the glue and how rigid the glue holds. I did a few practice rounds to experiment on how much Gorrilla Glue to use as well as water and now you are seeing those results. I hope that was at least a tiny bit helpful.
👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
Thank you!
Sorry for my novice question but is the water mist to help the glue - does the gorilla glue need a little water? Do you think this glue would work for very thin (0.6mm) veneers? Thank you!
Yes, Gorrilla Glue needs some water to be added. I’ve been told by a friend that it foams up a lot more if you added a bunch of water (maybe like using a sponge). You’ll have to practice to get the right amount for your project. This friend introduced me to a fine mister used with plants, that is what I’m using in this video. I spray the air above my work as it nicely helps distribute the mist instead of directly spraying the veneer.
I recently say David Bedrosian on IG use Gorrilla Glue on thin commercial veneer (and with a wet sponge) and he looked super happy with the results, but has t applied finish yet and it looks like there was some glue squeeze out through all the pores. Here is a link to that video: instagram.com/p/CwunnozgOJI/?igshid=NzZhOTFlYzFmZQ==
Inquire with him as he has yet to post a follow up video.
I'm curious why you went with a polyurethane glue rather than a veneering glue.. I've only used the polyurethane glue for oily woods such as teak. I know nothing about vacuum bagging or veneering. Thanks in advance.
Great question. There are a lot of veneer glues that are made for commercial veneers which are considerably thinner then this shop sawn veneer. I actually bought some veneer from www.veneersupplies.com and got it out to use on this project and realized on the label that it wasn’t meant for this thickness. I then started studying what Philip Morley does since he has recently been doing a lot of shop sawn veneer glue ups. I checked in with him and he uses Gorilla Glue. I got some good tips from him about wrapping in plastic, wearing gloves, using a fine plant mister, and misting the air above not spraying the panel directly. I’m pretty sure he learned a bunch of these techniques from Tim Coleman. I definitely not a glue nerd but I think it comes down to the amount of solids in the glue and how rigid the glue holds. I did a few practice rounds to experiment on how much Gorrilla Glue to use as well as water and now you are seeing those results. I hope that was at least a tiny bit helpful.
@@McIntyreFurniture It was, a couple of new names there for me to check out. Thanks