You are my UK HERO! Came over here after watching RCLifeOn as well. Thinking with a standard Stand Up Paddle, slowing down enough to turn with "an oar" in the water would allow for continuous testing. Proper wetsuit and body of water, ocean with surf, will be outstanding.
🤙🤙🤙🤙🤙🤙🤙🤙 Terrific! Solid 22MPH is FAST! 🏄♂️ I not only looks like a great job you did wiring that bad boy, it also sounds great! I would ride that all day! Cruise Ships and resorts NEED THIS! And so do i 😆!!!!! Just fantastic, I love it!
That’s awesome. Been researching a 3D printed hydrofoil design but thought those RC jets weren’t powerful enough. Looks like they are! Thanks for your excellent project.
@@tysk5729 yes but it was then laminated with glass fibre and epoxy. Unfortunately I applied it too thick and the polymerisation heat and shrinkage caused it to warp!!
23mph Mark?? bloody brilliant, now you need a resa to ride it on and have even more fun with a lot more water mate, brilliant job from start to now, enjoyed them all, Respect.
U r the Orville and wilbur of jet board.just started my research to build my own.hope u get the component and next vid soon.be safe from across the pond.
Haha, you are my hero! Making something like this and working up the nerve to try it out, that's awesome! Can you tell me what jet-pumps you used? I don't know enough about the RC world to know where to look. Thanks for sharing!
Ha Ha Great Stuff ! Never mind the skill, look at the speed of the manouver ! Love your work, will get your adress and send ya some genuine Aussie Surf Stickers for that there Gun, as they call em down here, well done !
i`m like bumping in any diy surfboard build in the whole youtube, but there is no way to get any tips for the hydrojets... everyone keep this info like the most precious secret :)
Cheguei em seu vídeo por curiosidade! Achei muito interessante qual o motor usou, tem vídeo mostrando montagem? Um brinquedo desse no Brasil seria muito divertido. Abraço e grato pelo vídeo
Hi Mark, I saw that you used 4 batteries (2 for the 620kv engine and two for the 1050kv) which in the video seen mounted in parallel therefore have a capacity of about 10,000mah (10ah). - On average how long do the batteries last before they run out? Thanks!
Bruuuh i need one so bad !!!! hahaha looks so cool ! And has a lot of power and speed. What's the range (time) and price approximately for one like this?
I found this channel through RCLifeOn's channel. That's an awesome surfing board!
same
Same.
Me too
I've never seen anyone surf in waders, but I Love it! 😄 Nice job on the board!
You are my UK HERO! Came over here after watching RCLifeOn as well.
Thinking with a standard Stand Up Paddle, slowing down enough to
turn with "an oar" in the water would allow for continuous testing.
Proper wetsuit and body of water, ocean with surf, will be outstanding.
🤙🤙🤙🤙🤙🤙🤙🤙
Terrific! Solid 22MPH is FAST!
🏄♂️ I not only looks like a great job you did wiring that bad boy, it also sounds great! I would ride that all day! Cruise Ships and resorts NEED THIS! And so do i 😆!!!!!
Just fantastic, I love it!
That’s awesome. Been researching a 3D printed hydrofoil design but thought those RC jets weren’t powerful enough. Looks like they are! Thanks for your excellent project.
what did you print a hydrofoil in abs ?? how does it performd and lasts ?
@@tysk5729 yes but it was then laminated with glass fibre and epoxy. Unfortunately I applied it too thick and the polymerisation heat and shrinkage caused it to warp!!
@@MrDoyley35 oh yeh glass fibre and epoxy would be strong and durable enough
Thats the most awesome thing I've seen. Great job
this guy is the forefront of his field ,love it keep on keepin it on man
I never seen a guy surfing with hip waders on! Kick ass dIY jet board congrats mate, excellent job, my hats off to you!!
90° wHaT!?!?
"Nah it's UpSiDeDoWn"
Priceless!!!
23mph Mark?? bloody brilliant, now you need a resa to ride it on and have even more fun with a lot more water mate, brilliant job from start to now, enjoyed them all, Respect.
Awesome! I would love to see your plans and assembly instruction? any time soon?
One of the coolest videos I’ve ever seen! You are awesome for making this lol
U r the Orville and wilbur of jet board.just started my research to build my own.hope u get the component and next vid soon.be safe from across the pond.
"OK wish me luck!" that's awesome!! haha!!
That's absolutely awesome!
Mate I love what you do and your character! found you because of RcOnLife. Keep it going man! Peace n love
Impressive mate , way too much turbo boost for the big kid lol. Great job.
Mate that is awesome. Seriously impressed.
You need a tether incase you fall and it doesn't get far away from you, same for the remote. It does look like fun, I'd try it!
I need that for my hobie pro angler 360
Good man to share this knowledge.
What size esc are you using now? How long on average are you getting out of the batteries? It has been great watching your progress
RCLifeOn sent me here
"Scary fast"???...Now we're talking! What a Jiggetty Rig...You're getting quite jiggy with it! 🏄♂️🤙Looking awesome Mark! Cheers, John ;)
Amazing surf
Well I guess now that you're actually having fun it's time for the police to stop in and boot you out. Looks great man!!
What a go!!! Must have one!!!!
Looking like some ripe gator food
Haha, you are my hero! Making something like this and working up the nerve to try it out, that's awesome! Can you tell me what jet-pumps you used? I don't know enough about the RC world to know where to look. Thanks for sharing!
What jets and motor
I'd like to pick up a duplicate twin drive system for a build I'm planning.
Super cool
Nice work
Amazing how far you've come over the past year or so
When speed of your invention makes you scary, LOL
Big fan of your work
Nice job bro.... I want to make same like that soon
So cool!
Hi Sir.
I wana buy combo engine. Share me link...pls. Many thanks
Brilliant I'm looking at building something like this that looks great. Crazy nothern man on a duck pond😝
Nice :-) 775's?
Props fellow Manc! Or should I say impellers? err... Did you just use a throttle curve to fix the sensitive throttle?
Ha Ha Great Stuff ! Never mind the skill, look at the speed of the manouver ! Love your work, will get your adress and send ya some genuine Aussie Surf Stickers for that there Gun, as they call em down here, well done !
What size motor are did you use? and what size are you?
That's brilliant mate, so when this going into production?
je veux le même please TUTO DIY de A à Z?
What was that @ 02:43?
what engine?
i`m like bumping in any diy surfboard build in the whole youtube, but there is no way to get any tips for the hydrojets... everyone keep this info like the most precious secret :)
Anything you need to build a jetsurf. Batteries, engines and everything?
I'am from indonesia
How much dod this cost to make ? ??? I been wanting one bad
This is insane
Cheguei em seu vídeo por curiosidade!
Achei muito interessante qual o motor usou, tem vídeo mostrando montagem? Um brinquedo desse no Brasil seria muito divertido. Abraço e grato pelo vídeo
Cool build but I’m just wondering why are people going out for a walk in the rain.!🤷🏻♂️🤷🏻♂️😂😂😂
what is the motor Kv and esc size?????
what motor are you using? great work keep it up!!
What jet pumps are you using?
Hi Mark,
I saw that you used 4 batteries (2 for the 620kv engine and two for the 1050kv) which in the video seen mounted in parallel therefore have a capacity of about 10,000mah (10ah).
- On average how long do the batteries last before they run out?
Thanks!
Few minutes on full throttle, however on my prototype/build, I went easy on the throttle and had fun the whole evening with only two batteries
what are the specs of this thing?
Bruuuh i need one so bad !!!! hahaha
looks so cool ! And has a lot of power and speed.
What's the range (time) and price approximately for one like this?
69
Nice one.
How much for it
how many hp ?
You should add a fine
Congratulations! what is the total weight? You and the board?
Oh shit the best looking like me with my prototypes 🤣🤣🤣
Fun :)
Insane!
sent u an email interested in jet pump purchase 2x. Thanks!
What size is the jet? 80mm?
Twin 53mm that basically gives you 106mm total. Beast.
A 106mm drive would have about the same area and volume of water as 4* 53mm drives.
Two 53mm have the same area like one of 75mm!
Yeah Luck is right .....
AYYYY!!! Been waiting for this new video for weeks now!! Please respond to my email to purchase those J-drives! Thanks and congrats mate!
how to make that
Good job