When & How To Use The HP Foot & Plate
Вставка
- Опубліковано 11 чер 2019
- Janome's HP Foot & Plate will give you that scant 1/4" you've always wanted. This foot is great for making Half-Square-Triangles, Curved Piecing, and Edge Stitching!
To learn more about Stitch Plates and Bobbin Cases: • Tips + Tricks: Bobbin ...
To learn more about Auto Pivot: • When & How To Use Auto...
To learn more about AcuFeed Feet: • Janome AcuFeed Foot Op...
To learn more, visit: www.janome.com/ - Навчання та стиль
I'm a quilter and I can see how helpful these feet and plate could be for both my piecing and the quilting process.
Great tutorial! Thank you so much. 🙂 I'm so glad to find tutorials for my machine--I will make more time to build my confidence with these tutorials.
It's easier for me to learn by watching and listening.
Thank you This is sooo needed during Covid times as sellers are not able to provide in person instructions for new machines.
New machines have so many options and we need to fully utilize them to get great results making our projects!
Thank you! Looking forward to other online tutorials!
Anna
Thank you for this fabulous tutorial! You explained everything so clear!
Great tutorial, you give a very relaxed and confident lesson - I feel my quilting will go to the next level with this interesting in-depth exploration into the HP plate etc, thank you.
Thank you for that. Very informative. So easy to listen to!
Thank you for this tutorial It was very informative.
Thanks for this tutorial, very informative. My machine doesn't have the HP plate, but I'd love to have it, it looks great. I know the MC6700P has it too, I love that machine, I'd love to have it, even though I love my MC 8200 QCP too. If I could, I'd get the 6700 in a heartbeat and have both of them and would love them both ☺
Nice demo, looks easy to operate.
Thank you Miriam 🔷
great presentation of info
Seems nicely made
This is the first I have heard and seen the HP2 foot. And I found it very helpful watching you use both of these feet. I will have to use the HP foot for my piecing now. Thank you again Miriam, love these video tutorials.... Claudia
Hi, I just noticed your name, and I live in Jamestown, NY where everything is about Lucille Ball! I ordered the HP2 foot for my 15000 to quilt with now. I hope you enjoy it with your HP plate and Happy sewing. Love your name!😀
Great Video! Please do a few videos using the accufeed on fabrics such as cork or vinyl for those of us who are Bag Makers. THANKS
Thank you
Thank you! You're the best! ❤🦋
You are so welcome!
What is the best source to purchase the HP 2 foot? Does the plate come with the foot or is there a separate purchase? And what is the MSRP? Can't wait to try this out. Thanks for a great tutorial. Such a pleasant voice, appreciate your being straight to the point. :)
Do the feed dogs (on the upper main screen) need to be put on? No videos I’ve seen have addressed the settings on the home screen. Thank you in advance.
Great video! Can I use both of these HP feet on my Janome 7700?
I understand more about the HP2 foot and plate. The 1/4 inch foot seems great. I hope it is scant. Thanks
I just ordered my Hp2 foot since I have been piecing with the plate and the foot that comes with the plate.
Can u use this hp plate on the Janome 6650 machine
Nice video, but it was not clear (to me) what is meant by the "inside" of the foot, and it seemed like that phrase first referred to the outer edge of the foot (away from the needle), and then at the end of the video to the edge of the foot nearest the needle. Please clear up my confusion!
Thanks Miriam, like your videos, please make tutorials on the quilt maker pro 18 longarm. I purchased mine in Arkansas when you were here Nov. 2017 and love it. There are so many things that it will do, but I probably have not discovered a lot of them. I certainly would like to know that I am not missing any really cool and helpful things it is capable of doing.
We are so glad you are enjoying the videos. Visit our QMP 18 playlist to learn about the machine and it's many features: ua-cam.com/play/PLkFx1RN-5WIE_bdnvgGCLR0K66Cp5rqo9.html
You may also find some techniques that we used on the QMP 16 helpful: ua-cam.com/play/PLkFx1RN-5WIED4GMPDSMzbfQRYIKemTQU.html
Keep
Doing more videos, please.
I've heard to only use purple point needles for quilting! Do you recommend these as well? Thank you!
Does the HP/HP2 system work on the MC14000? Even the Janome site doesn't list it as compatible with the MC1400. Thanks!
Ive been trying to get his foot for yonks! Where can i get it and how much, im in the uk
I love your earrings!
I just started using my HP2 foot but I cannot press the accufeed button my the cpu - it will only allow you to press this button IF you have one of the regular stitch plates attached. Do you have any suggestions? Also what I find is that there is a big space between the HP2 and the HP plate underneath - it doesn't "grab" the fabric right away. Do you have any suggestions about this too? Thanks!
I was wondering if you have any idea why I can't set my machine, the Horizon 9400, to stop in the 'needle up' position (which I learned how to do in another of your videos) when using my HP feet? I had it set, but when I changed to the HP foot and plate it cancelled that setting. I went to the 'Common Settings' and it is no longer an option.
Will the Hp Plate and foot work on the Skyline 7
How do you set your stitch length for straight line quilting
Great tutorial. I would love a how to on the machines embroidery to make labels not using an embroidery machine. Hope that makes sense.
Will the HP feet and plate work with the 11000?
Does this work like the walking foot or replace it? I don’t like the walking foot because it is awkward and you can’t see what you’re doing. I need alternative
Will the HP plate & foot work with the MC 9900?
Is it possible to use the needle threader in HP mood?
Hi trying to see jersey with twin needles but threads tangle please advise on Janome J3-24
I am using my HP foot with pieces.cut by my Accuquilt Go Big. Because the dog ears are already cut off, I need an exact 1/4" seam. Do you have any tips for getting an exact 1/4" seam? Thank!!
Yes! Please read this article written by our national spokesperson, Kimberly Einmo! www.kimberlyeinmo.com/the-elusive-scant-1-4-seam-defined-and-conquered
Are there other presser feet that fir the HP2 shank.? Especially one with a edge guide?
Terry, we do not manufacture an edge guide foot with the HP2 shank at this time. There is a 1/4 guide foot available for the dual-feed AcuFeed system. Please see your local Janome dealer to try it out and purchase. Happy Sewing!
Thanks for your video, can this foot and plate be used on the Atelier (Skyline) 6? Thanks, Clare.
I'd like to know the answer to this also. I can see it can be used with the Skyline S9 which is also 9mm.
The Skyline 6 is similar to my machine, the mc8200qcpse, which is not compatible with the HP plate, so probably not. I think the machines that can use it are the mc6700p, the horizon mc9450, the continental m7, and the latest one, the m17. There may be other models but I can’t think of them. Another machine that can also use it even though it’s not standard with it, is the mc6650, the one with the beautiful red panel on it. That machine will take it, you just have to buy it separately. I don’t think this is well known. I saw it on a Janome Canada video about this machine. Hope this helps
@@kathybarry2556 thanks for responding Kathy :) Happy sewing
These video are wonderful I have the 9450 and sews beautiful till I try and use the HP plate and foot then it’s a hot mess..stitches are way to loose . I have re thread both top and Bobbi and nothing seems to help..and idea what I’m doing wrong I hope you see this comment..thank you
Hi - I haven’t seen anyone else reply to your message, and I purposely read through the comments to see if anyone had the same issue I had. My solution to the loose tension issue is to manually increase the tension. I imagine there are lots of machines out there that weren’t “set” properly, with the tension set very low. Good luck!
Is this just for 9 mm Janomes? Or for 7 mm Janomes too?
I just bought this machine. I was using the the HP plate and foot. All of a sudden the foot came apart. The pin just fell out. Who do I contact to have it replaced?
Is an HP needle plate and HP presser foot available for the Skyline S7?
😅very beautiful
I have a straight stitch plate that comes with the S9 to be used when embroidering. Is this plate similar to the HP plate ? Can I use it together with the HP foot?
No, the straight stitch needle plate cannot be used with the HP foot. That foot can ONLY be used with the HP plate.
There is a software update you can do on the S9 to be able to use the HP plate and the HP feet. You can access the update on the Janome Global page.
@@DebFlem thank you 🙏
Does this foot fit janome horizon memory craft 8200QCP thank you
No unfortunately, this machine isn't compatible with the HP plate or foot, I have this machine too, I love it but sometimes I wish I could use the HP plate...
What is the hole to the right of the hp foot for? It would be 1/8 away to the right of the needle on the foot
From memory, if you accidentally put it on without the right foot plate, the normal needle position takes it through that hole so it doesn't break the needle.
I have a janome skyline s7 ,can I use the hp foot with the plates I have, neither of them say hp on them , thanks Linda
Linda, the Skyline S7 is not compatible with the HP Professional Grade Foot and Needleplate system. Your machine comes standard with the regular zig-zag needleplate, and the straight-stitch needleplate as an option.
Can the HP2 foot be used on a Janome MC6650? Thank you
What glue do you use for glue basting? Thank you.
Hi Sherry, I just discovered glue basting. I love it for bindings. I use Elmer's SCHOOL glue (must be "school", not "glue all"). I pour it in a bottle with a fine tip. I bought the bottle here: smile.amazon.com/gp/product/B00EZSY5XQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I like the smaller glue pens like the ones used by Fons and Porter or Bohin. I do a lot of bindings and find I have more control with these...
How can I use the HP foot and plate on my Janome Memory Craft 8200 QCP special edition
?
Patricia, the HP foot and plate are not optional accessories for the 8900 QCP model.
Can this be used with the QCP8200 machine?
Unfortunately it is not compatible. I have this machine too.
Can I use the HP foot and plate on my Janome MC 8900 QCP?
Barbara, unfortunately the Memory Craft 8900 model does not have an HP foot or plate as an optional accessory.
Will this fit an 8200QCP?
Unfortunately not, the machine isn't compatible with it. I have the 8200 too.
It there a simlar foot that would work with my 8900 horizon qcp memory craft machine
It depends on what you're trying to do. If you want a narrow foot, consider the single AcuFeed VD foot.
I am a bit confused what is the "inside of the foot" ? so I line it up in the opening of the foot but against the edge ?
To clarify, line up the raw edge of the fabric with the precise right outside edge of the HP foot to achieve a scant 1/4" seam.
I have the mc 6700p and the HD9 and now i realize that none of my hd9 feet can be used with this plate
Will the hp foot fit janome 8900 horizon QCP MACHINE
It probably won't, I have the 8200 qcp which is very similar and the HP plate is not compatible with it
@@kathybarry2556 thank you for the feed back Gloria Dalgleish
What machine are you using? It links like a Skyline model. I am so disappointed that the HP foot was not available for my S 9. Will that be available soon?
Vikki, there is an HP foot and plate available for the Skyline S9. Your dealer can contact us regarding availability if it is currently out of stock. They can contact our sales department who can give them a general eta to your part of the country. Happy Sewing!
@@JanomeJAI I went to Pocono Sew and Vac in Stroudsburg PA where they tried the plate on their Skyline 9 to make sure and it did not fit so they declined to sell the foot and plate to me. Maybe you know something they don’t? I would love to have that combo for piecing.
@@Bandaid17 Vikki the Skyline S9 does have the HP foot and Plate as an optional accessory. The plates vary depending on which model they are for - for example, the plate for the Continental M7 or 17 are different than the HP Needle Plates for the S9. We recommend making sure they have the proper plate for your machine, and apologize for any confusion.
@@JanomeJAI Thank you. Will pursue with my dealer (they are really very good) I’m sure they will get it for me!!
No idea if any of this works with my machine. Would love to know just what models it works with.
Hello Trish - here's a link to our website that lists the machines that can use the HP foot at this time with one addition - the Continental M17! Happy Sewing - www.janome.com/accessories/sewing-machine-feet/hp-needle-plate-and-foot-set/
In addition, here's more information about the HP plate: www.janome.com/accessories/sewing-machine-feet/hp-needle-plate2/
Does it work with Jan o m e 6600p
We are sorry, but this set is not compatible with the MC6600P
I am a little bit confused.. does the hp plate and foot do a straight quarter inch or a scant quarter inch???
Juanita Acevedo scant
I tried to purchase a set in Australia and was told the HP Plate does not work on the S7 machine. Something to to do with the S7 not recognising teh sensor on the HP plate. It's rather disappointing. It would be helpful if you could provide a list of what Janome machines it actually works with .
I have an S7 after some research I did buy the HP foot (not the accufeed foot one) And use it with my straight stitch plate that comes with the S7....this then allows you to only use the straight stitch setting....you do have to be cautious....I will find the link to the lady that posted it about the S7....I have been sewing this past week with it....and it’s beautiful! My stitches are amazing.
Kristin De Vargas ua-cam.com/video/PX3KU5F7QT4/v-deo.html
Kristin De Vargas ua-cam.com/video/bjvgxMV0VTg/v-deo.html
If I don’t use a starter fabric my work gets sucked down - very frustrating sometimes. I have the horizon.
Will it work for 8900
The HP Foot and Needleplate are not optional accessories for the MC8900. For more information on which accessories fit your machine, please see the machine's page on Janome.com at www.janome.com/machines/sewing/mc8900/. Happy Sewing!
Should have done close ups and her fingers were in the way
Why don’t you answer the Questions from the audience.
So disappointing to watch this only to find out I can’t use them… maybe, y’all could say up front which size mm to use. Ie: 9 mm, 7mm…
Leider sind die Gebrauchsanweisungen alle in ausländischer Sprache, daher kein abonieren, oder Daumen nach oben. LG.Stefanie