Windshield Wiper Arm Change! EASY Same for most Vehicles! Don't use hammer unless very steady handed
Вставка
- Опубліковано 28 вер 2024
- (note) if you are going to use a hammer be very careful so you dont crack windshield or put something on windshield to protect it. all parts of your windshield wipers is very important for visibility and safe operation of your vehicle. This video shows you how to change out your windshield wiper arm, which can sometimes get bent, stripped, and cause your wipers to not make good contact with your windshield.
To Support Flashback502, please send donations to:
PayPal: www.paypal.me/...
Or
Fan Mail, Products & Donations:
Flashback502
Po Box 20201
Louisville, KY 40250
I don't think that any person in the world could have explained that process more precise or clearer than you just did.. Thanks for your effort.
Lucky you didn't crack your windscreen when forcing the hammer against it to remover the wiper
I like that you just got right to the point and didn’t put a whole bunch of extra stuff in the video
Your welcome👍, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
I knew when I heard the accent, I was gonna like this one. Thanks for the vid...gonna try it out in the Subaru.
Lol Your very welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
Thank you so much!! I’ve searched for this so many times & you’re the only one who helped
Glad I could help!
Thank you so much for this 🙏🏽😭 somebody in nyc just quoted me $120 to fix this for the labor 😭
Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
Just fixed my stripped wiper with help in part from this video. Thanks!
Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
Straight and to the point. Perfect video. Thank you.
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Thank you very much, great teacher.😊
You're welcome! Glad could help Please subscribe like and share and check out our other helpfull videos
Splines and a tapered shaft
Mark the post top, then down the threads and mark the wiper arm one continuous marking to replace the arm easily. I would not recommend using a hammer against the windshield, it may work. But it may not. Metal and glass
Great job man, throwing up a like and comment to help out.
Thanks for 👍 glad could help thanks for comment
Nice tip on the ribbing and why I couldn't pull mine up after removing the nut but damn bro, you about busted your windshield there. maybe a towel or mat for protection?
Yes agree 👍🏿 glad could please subscribe like and share and check out our other helpfull videos
Thanks.. I am going to definitely be able to do this on my own
Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
One of the besr clutch how to videos.
Glad it helped. Please subscribe like and share.
I really appreciate this video. I consider myself pretty handy and I had my wiper motor go out, I changed the motor and linkage. I can see everything working before I put the wipers on but as soon as I put the wipers on, the wipers don't move. The motor is working and the linkage is trying to move but the wipers jump but they don't move. Any advice? I can't believe wipers are getting the best of me.
Your wiper connection may be striped. Hope you get it fixed. Please like subscribe and share
Thank you for the video.
You're welcome
Thank you for the help!
Good shit g, my girl broke mines
You're welcome
Thank you so much
You're welcome! Glad could help Please subscribe like and share and check out our other helpfull videos
BTW, that's a nut, not a bolt you removed. Also the groves on the shaft are called splines, not rivet thingys.
So after doing this I bought brand new wiper arms, that dont have the spline pattern already tapped into the hole where they slide on. The stalks of the wiper transmission of course do. Is it same procedure or am I then going to strip the stalks on the transmission? Not sure how to attach them…
Thank you sir😢
You're welcome! Please subscribe like and share and check out our other helpfull videos
Thank you for explaining it the way you! I understood everything!
Your welcome glad could help please subscribe like and share and check out our other helpfull videos.
what if they are just faded-can you paint hem?
Yes
This helped me today. Thanks boss!
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
THANKS👍🏿
Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
Has this done at the shop, and when i picked it up there was a nice quarter size chuck taken out of the paint onnthe hood, how do u think that happened?
👍
👍🏿 You're welcome! Glad could help Please subscribe like and share and check out our other helpfull videos
Nice, just gotta watch out that you don't crack the windshield with that hammer.
Yes agree👍Please subscribe & like and share if haven't already and check out our other helpful videos
It’s a miracle you didn’t bust your windshield out using a claw hammer in place of a puller.
After watching this video I have no idea how mine flew off onto the road while it was storming. Thanks for the video.
Lol Your very welcome, Glad could help. And thanks for comment please subscribe and share.
Out of several other videos I watched yours by far was the most helpful and made it seem so much easier. I'm very happy that you posted this video. Thank you.
Your welcome glad could help please subscribe like and share and check out our other helpfull videos.
Nice to see he cares about the paintwork 🙈
This was very helpful and straight to the point thanks man and keep on posting these good videos but it looked like you where going to crake the window but you didn’t and I’m glade cause a new window would have costed a good bit
Lol yea rubber hummer would have been better, please subscribe like and share and check our my other helpfull videos.
I don’t recommend the hammer I did it and cracked my windshield but I used the fancy tool and took it off just remember when removing the arm you have to lift the wipers and pull
Thanks for tips. Please subscribe & like and share if haven't already and check out our other helpful videos
NOT the aame for most vehicles
Hi, can someone please help me I’m desperate I have a 2004 Volvo XC 90 I have done this exact procedure but when I turn the wipers on and they stop they keep stopping in the up position. I’ve been working on cars for 20 years and I cannot figure out why the hell it’s doing this??????
You May have a bad windshield wiper motor
Some penetrant on the splines could be helpful if you have time.
Very useful. Been wondering how to remove my old wiper arm!
Thanks for watching glad could help. Please subscribe if haven't already and check out my other helpful videos.
For those cracking their windshields, throw some cardboard and a rolled up rag anywhere you might hit the glass. There is no reason you should be breaking windshields with this method?
thanks
Thank you very much
You are welcome
Thanks brother!
Bro... instead of hammer just use wd40 or something to loosen the bolt
the greatest video.
In my next video, I show you how to replace your broken windshield.
I need the nut that holds the wiper arm on mine keeps getting loose
The hammer didn’t work. I gotta find away to get these things off or I won’t have wipers
I replaced that already with used one
I am having a hell of a hard time finding windshield wiper arms that have the rivits, I've got a 2000 blazer, and all the replacement I've found no longer have rivets.
Yea will have to check ebay or junk yard. Please subscribe like and share 🙏.
Thanks for the video.
Thanks man👍🏼👍🏼
Thanks man, this was helpful
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Thanks for the vid
It’s a Nut. Not a bolt.
Yikes
Watched several videos. You showed how to get nut cover off best thanks.
Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
There's a puller to do this, but I think it's hard to get one that small.
Yea and hard to find. Glad could help Please subscribe like and share 🙏.
Thanx bro, I just used my claw hammer and it did pop right off!
Your welcome, Thanks for watching and commenting glad could help.Please subscribe & like and share if haven't already and check out our other helpful videos
Where’s the best place to get the arm?
Junk yard or ebay. Glad could help Please subscribe like and share 🙏.
You just saved me. Awesome stuff
You're welcome! Glad could help Please subscribe like and share and check out our other helpfull videos
Shade tree mechanics saving us what they can
Lol 👍Please subscribe & like and share if haven't already and check out our other helpful videos
This helps,I hope I don't mess it up.
Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
I have a 05 Chevy Venture minivan. I have tried everything to get my windshield arm off! Nothing has worked. Any suggestions?
Thnx 4 the details bro
Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
Thanks bro other people made it so hard on UA-cam
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Amazing video
Thanks!
Thank you sir
Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
thanks a lot brother!
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Hi, I guess I wasn't gentil and now I have a cracked windshield...
Brilliant! Maybe put a pad between the hammer and the glass.
Thanks man I got to switch mine out . An ex gf broke them off so I had to buy new wiper arms lol
Lol Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful video
Excellent. Thanks!
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Holy ding sound. I thought windshield is gone..
What should the nut be torqued at for reassembly?
Thanks man! Trying this tomorrow
Your very welcome Glad could help👍 thanks for comment, Please subscribe & like and share if haven't already and check out our other helpful videos
Thank you! This is so clear and makes it look so simple! :)
Glad could help👍Please subscribe & like and share if haven't already and check out our other helpful videos