I totally agree - workshop sounds are the best music! Of cource there are even worse way to make video is to put music over speech. But I too enjoy the videos without music and even better is when the moments with powertools are slitely muted down 👍
When I was working in plastics fabrication I made one of these 2.4 metres long for bending full length sheets. It's relatively easy and they work a treat once you have got used to them.
I used a similar tool for a job I had installing custom acrylic showers and tub surrounds. It was an 8 foot long metal square tube with a rod inside nestled in an insulated housing. I laid it out on my work table and laid big sheets of acrylic on it just long enough to soften the material and bend whatever angles I needed. I hated that stuff but the tool was simple and effective
I don't think the washer is for insulation, I think it's for spacing and to help hold the wire. The insulation should be provided by keeping the channel away from the angle bracket with the spring.
Можно поставить прижимной уголок над нагревателем, чтобы его плоскость совпадала с осью проволоки и тут же аккуратно отгибать при достижение нужного нагрева.
![[Pkmn HGSS soul link randomlocke] Capitulo 6: Morti y el Faro de ciudad Olivo](http://i.ytimg.com/vi/A0S0rVJ_bvU/mqdefault.jpg)
When you have work videos without music it's truly nice to watch. The sound of work being done is the best sound. You can feel you are at the place
I was just thinking about the same thing and saw your comment!
I thought my soundsystem broke down. 😂
And it did 🤔
I totally agree - workshop sounds are the best music! Of cource there are even worse way to make video is to put music over speech. But I too enjoy the videos without music and even better is when the moments with powertools are slitely muted down 👍
Unfortunately this video does not have any explanation about the details so it’s not as helpful as it could be with some words.
When I was working in plastics fabrication I made one of these 2.4 metres long for bending full length sheets. It's relatively easy and they work a treat once you have got used to them.
I need to make one that's 2.2 meters long. Could you share the specs of yours? Diameter of nichrome wire, voltage and amperage etc?
This is amazing ! Finally something thats not a wire bending machine or a nut cracker/failed hammer.
2:30 WOW! a flathead screw driver being used as a screw driver and not as a lever... haven't seen that happening in a long time!
Молоток это очень неожиданный ход! Браво!
Videonya sangat menginspirasi untuk menonjolkan kekreatifan , 👍👍👍👍
Great simple innovative ways, thanks
Fantastic , clear and tech shots close up. Great
I use air gun with small diameter cap. But your machine is amazing. I can work on this all day.
I enjoyed the video and especially enjoyed not hearing a person rambling on and on. Great job!
You are an absolute genius.
👍
When I started in the sign trade in the late 60s, we used asbestos frames which contained fire spirals from night storage heaters to bend perspex.
Clever machine! Well done!
Excellent, thanks for the video.
I used a similar tool for a job I had installing custom acrylic showers and tub surrounds. It was an 8 foot long metal square tube with a rod inside nestled in an insulated housing. I laid it out on my work table and laid big sheets of acrylic on it just long enough to soften the material and bend whatever angles I needed. I hated that stuff but the tool was simple and effective
Please share video or pic please
@@innovativetec1362 look up FTM freestanding strip heater, that is the exact model I used
Dddd DD 4445
P
Nice. And it's so simple.
thanks for sharing the effort
What a super idea 💡❤👏👏👏😍
Tons of Gratitude here for You
Buen proyecto. Práctico en su tamaño y versat😢, saludos desde Chile 🇨🇱
гениально,потому как просто и очень нужная вещица,оценка пять.
Well thought out & excellently executed.
Editing Dept. gets an A+
MARAVILLOSA OBRA WONDERFUL JOB,,. FROM PERU THANK YOU I GONA MAKER
I was hypnotized
Excellent Job
Действительно годная самоделка))) жаль, что не всем она нужна(((
Wooow kereeenn... ☺️👍
Отличная вещь. Спасибо за идею.👍
nice work, Gracias desde España
Nice build!!
Thats really cool!
Really good design!
Thank you for the wonderful idea 😊
Looks so practical 🌸🌸
Really good
Отличное и нужное приспособление.
That is COOL!
Auténtica genialidad.
Gracias por enseñar, maestro.
Good project sir....
Dang it. Another tool I need to build.
So smart.
Wow super video
Hello my friend, an excellent video that deserves a like. I have a question about the power of the electrical transformer used in this design
Also my question,what about electric supply used in device
Best videos I will try for my chanel too
Ingenious
I see some important in the design, heat porcelain conductor at each end of nicrome wire, scale and angle protector will be great advantage
Great job ✌️🤓
Valuable tool
Wow, I want one
Very impressive! 👏
Good very good.
Awesome Tool !! Very Useful 👍🏻👍🏻👍🏻
Perfect 🎉❤
Brilliant....
Хорошая работа.
Bravo!
so cool 😎
great ❤🎉
Excellent 👍
Excellent job.
Boa noite amigo excelente projeto ótimo vídeo gostei muito.
Very good 👌
Like his idea to cut straight
Weldone🎉
Thank you... well directed tutorial.... now, if you can show me how to make an acrylic cylinder bender!!!! That would be over the top...
Very strong!😉
mantap debes pisan jos gandos wamenos
Muy buen proyecto!
Felicidades👏🏻
Solo que en la parte eléctrica y el material del hilo no supe nada🤷🏻♂️
Damn bro U never cease to amaze me on here with these awesome builds.. Keep up the great work..
What type of wire did you use? Nice project
Creative diy
Parabéns pela iniciativa e uma boa ideia 🙏
Gue bayarin bang 😁
Incrível como nada da errado ..vai tentar vc fazer 😅😅
Excelent
Very nice .. I just bought a laser to cut acrylic.. this will be perfect.
Так просто і так ефективно. Лайк
amazing!
Mast
Excelente
What kind of disc is this green disc on angle grinder? Dedicated to cut aluminum?
For thicker pieces it's good to make a narrow cut (half of the thickness) in the inner side of the bending. You gonna have a small radius bend.
Very nice
Working DC current or AC current ? And are you use dimmer switch ? ( for voltage controlling)
Great job!!!!
Can you tell the electronic equipment used? Voltage a amps for power source, what kind of dimmer, etc... Thanks!!
Nice question
Nice work bro ❤️😀
👌 you are master machine making, bhai ye DC Circuit hai na
very nice
Ini baru mantap
Very good.
Maybe leave out multiple screw tightening. We all know how that is done. 😊
I wish I had a workshop, a garage, some power tools…….. A Fricking House !!
😢 rent and apartment life for me. 😢
Like it
Nice...
Thanks
Did anyone else notice the design flaw? 3:16 The rubber washer is no guarantee the screw won't make contact with the metal track.
I don't think the washer is for insulation, I think it's for spacing and to help hold the wire. The insulation should be provided by keeping the channel away from the angle bracket with the spring.
Можно поставить прижимной уголок над нагревателем, чтобы его плоскость совпадала с осью проволоки и тут же аккуратно отгибать при достижение нужного нагрева.
ненужное усложнение,а в этой констр. всё гениально.
@@абдул-барисулейманов не усложнение, а дополнение. Удачная конструкция, да, но не гениальная, не надо переборщивать ) Тут не нужно быть Энштейном.
@@Valery_1954,дополнение утяжеляет,эйнштейн бы не одобрил,высунул язык,помните(?),то-то же.
Is the aluminum profile not too close to the positive and negative connections ? For possible short circuit ?
Very well thought out design. Subbed, liked, but to scared working with electricity
👌👍
Genial 👍