Thank you for the high definition recording with no music, day and night time filming, detailed instructions, clear voice, suggestions, links, and high contrast diagrams/verbiage. This is hands down the best DIY car video I have ever seen. Keep up the phenomenal work. The car looks immaculate, too. Subscribed!
Just installed these lastfit bulbs in my Camry and they are AMAZING! I did it all without removing any of the pieces of the tire arch covering. I just stuck my hand down in there and did it, it was hard but possible. I don’t have particularly long arms or anything
Appreciate your video. Very easy to install and took about an hour to install the high beam, low beam, interior lights, switchback lights and license plate lights.
2017 Camry Se. so I just want to start by adding that if your fog light bulb does not have 2 filaments inside of it these will not work. They have to be dual circuit for them to work hence the 2 filaments. 2nd they are not as bright as the original xse model are explained but they more than sufficient enough. I changed headlight with Lasfit LaAir 10000 lumen bulbs and they’re awesome except drl’s flicker. Waiting to hear back from lasfit as we speak. Any other question I will glad answer if you reply
Easiest way to do this is just use a jack and go under as for Camry’s its an easy access . Pull it place the new one and you’re set . Only do this if you don’t have a jack . Just did it today . By the way they work perfectly!
Hi everybody, just a quick update on these LEDs. So far so good; the bulbs still perform perfectly fine. I also plan to do a video update on them soon to answer some of the questions I've had. Have a safe drive.
Looking forward to the update. I have a 17 SE with all the LEDs from your videos accept the switchback fog/turn signals. I have no issues accept I do have a flicker on the HB3/9005 LED headlight bulbs. I will be doing the switchback next week.
hello, I have a Camry 2016 SE, I also wanted to change the halogen lamps in the corners to such LED ones, I tried to install Chinese ones, but they work quickly, i.e. frequent blinking. I understand this relay turns swears. How does it work for you??? did you change the turn signal relay?? the relay is very difficult to change, very interesting, please share how you did it? Or is it already light bulbs with built-in resistors? or how ????
@@randomreviews7210 I have 2015 SE Camry and turning signal light should also work as a DRL light together with with high beam. How come it doesn't blow a fuse or melt since the white light stays on when DRL is on?
I have 2015 SE Camry and the turning light should also work as a a DRL light together with with high beam. How come it doesn't blow a fuse or melt since the white light stays on when DRL is on?
I have used it the bulbs are of very good quality but the white light is not that bright as shown in the video so i swirched it to a different switchback led with resistors and its way brighter on both colours
Very nice Toyota Camry, upgrade LED lights. Those are way brighter. I do not like the factory halogen lights or not the best LEDs are the best thumbs up on your video bro.
2 things. If only they weren’t so darn expensive that would be great haha and if they came in red and white that would be perfect. I have 16 corolla and want to get red bulbs for my rear signals but for some reason Toyota is super picky with electronics I tried resistors and maybe didn’t install them right they flashed all wrong so I hope these error free no hyper flash work for me
I totally agree on the price point, just personal preference, I'm not a real big fan when it comes to an external resistor due to the amount of heat they produce. But these seem to work really well so far ua-cam.com/video/B_l1S61qnuI/v-deo.html good luck though
Hey there, not too sure if you’re still active here. I got the exact same bulb from your video and I also have a 2017 Camry SE, but for some reason the bulb seems to be too long. Would you know if I somehow have a different part down there?
2015 and 16 Camry did not have option for fog lights at all. Just useing turn signal location for the white Day lights What did you upgrade the factory DRL next to headlight with. no led will work properly with toyotas system Thanks
How do you keep the daylight led ON at night along with the headlights on ? Mine when you turn the headlight ON, the daylights turn OFF and instead the small fog lights turn on !! By the way mine is Camry 2016 hybrid Australia
I sorta have my doubts. The description of the bulbs says not to leave the blinking for longer than 8 minutes. But if you buy the switch backs, the white led is going to be running WAY longer because it's being used as a drl application. Will this not cause an overheating problem. The "no resistors" statement has me feeling fishy too. Sounds to good to be true for paying $60....further feedback would be nice.
I agree especially having them on during DRL. I always keep my DRL on for my 2015 SE Camry, however since the oem halogen stays on, it's hard to believe the led can do the same or won't blow a fuse since they generate heat 🔥. I like the idea of these light though
I've bought a cheaper product off amazon that's a drl switchback, it's very bright and works well. But, I've had to install resistors. Not bad, as long as you know what you're doing.
@@DanSaleem Vouke 4.1 out of 5 stars 436Reviews 7441 7443 7444 Canbus Turn Signal White/Yellow Switchback LED Light Bulbs 22 SMD with Projector, for Standard Socket, Not CK- Pair of 2 with load resistors Obviously make sure you order your particular size but hope it helps
Cause thats a chrysler. Toyotas don't usually need resistors from my experience. All fiat chrysler dodge jeep needs resistors when it comes to turn signals. I know cause my Jeep's turn signals were bloating a few days later, one stopped working hence why I checked them.
I have 2015 camry without fog light on front bottom bumper. Just orange turn signal. If i add LASFIT bulb, will i see the white light when i turn on headlight?
Hi Barry, these are not bright enough to light up the road. I've been using these ua-cam.com/video/t0NuIs4e0Gs/v-deo.html for about 4 weeks now, and they are much brighter, easier to see and more pleasing to the eyes than the stock ones.
When your signal lights are in DRL mode *White*.... Why is it dim? But it is bright like crazy when signaling to amber.. is there a way to increase the intensity? thanks
yes bro it will work on XSE model cause all of them have the same plugs i also wanna install it in my camry 2002 se but its so much expensive in UAE just go for it :)
I installed this exact light bulbs on my 17 Camry XSE for my front turn signal and they didn't work as a switchback light with white/amber, they only worked as a regular amber turn signal with no white color even though the bulb have the white chips on it.
Hey my brother, thanks for the great review, I was just wondering to put the led turn signals to the front, I have 2016 Toyota Camry XSE V6, but it already has white led fog. It’s just that I need only led turn signal. Do you think you can help me out with this? My camry has different headlights also, I don’t know maybe because it’s a V6 version. That would be awesome if where I can get led turn signals. Thank you!
Yup, XSE comes with different turn signals/fog lights, but most likely they do take the same part which is 7443/7444, if yours takes one of these, then they should work. please check with your manufacture to get the exact bulb size/part.
I believe one of the features that separate the upper trims from the lower trims is that LEs and SEs get halogens standard, the XLEs and XSEs get LEDs standard. I could be wrong, but I'm pretty sure I've seen an SE with halogens and an XLE with LEDs. I'm considering this upgrade because I want to restore DRL function with either low-beam headlights or switchbacks in the turn signal. None of the kits I've seen so far can turn off the white when the signal is activated, however. Toyota really should have implemented DRLs into the bumper mounted signals or just used the damned low-beams on full power for DRL. Whoever had this bright idea of low-power high-beams for DRL needs a good swift kick in the ass. Them and the inventor of CANBUS. That BS makes upgrading bulbs a nightmare.
I am in Canada, and I would like to purchase this product. How can I buy this product ? I tried to buy it by link, but it says, “this item does not ships to Canada”.
does the LED turn signal still light up even though it's hyperflashing? Either way, I'd definitely contact the seller about that, most likely it is manufacture's defect. Hope that help.
same exact bulb fits.... camry and avalon literally have the same light wiring and module ,,,,well this light socket is,, the headlights for avalon share wiring with XLE/XSE camry
Considering this upgrade, however -- I've checked and my car apparently has 7443 / 7444 factory, but I am curious if the three-wire setup here is high and low 12V for flasher / running light and a ground wire, or, if being an SE, the car in this video had factory fog lights? If so, I'm not sure this upgrade will be right or legal for my '15 LE without factory fogs. Can anyone answer this? Considering another kit that requires an additional lead from ACC, but also uses switchbacks.
@@jadk734 No, I was simply trying to disable the factory DRLs and install an aftermarket DRL system that would allow me to run LED headlight bulbs. The kit I found was only for factory LED equipped cars, and the DRLs weren't that important to me other than passing inspection, so I ditched my aftermarket LED headlight bulbs, replaced H11s with modified H9s and 9005s with modified 9012HIRs (plenty of Internet info on doing this), then disabled the factory DRL controller in the stereo settings, only turning them on long enough to pass inspection, then turning them back off afterwards. I have to say, the H9s and 9012HIRs are just about as bright as the LED headlight bulbs I had, so I can't say I really miss them. Only question is whether an aftermarket stereo replacement would allow me to access the DRL setting without the factory head units installed. CanBus is the main problem with aftermarket lighting, and whoever came up with it is a jerk-off.
Switchback simply means, switching back and fourth between two colors. U get two function types. One is white led drl, and then amber white amber white. The other is white led drl, and turn off for amber off amber off. Than back to white. That’s a switchback.
Hi. Were these installed on a Camry model with the factory LED daytime running lights (in lower bumper area near blinker) or on a non LED factory model (only daytime running lights on top near headlights)? I have the factory non-LED SE model and hoping these would be a direct replacement of the blinkers giving it the “switchback”’effect. Thanks!
memberFU hi, this is the non-LED SE model, and yes this is a direct replacement (white led fog light and amber led turn signal) “switchback look” kind of.
Here you go www.ebay.com/itm/LASFIT-3156-3157-7440-7443-1156-1157-LED-Turn-Signal-Light-Bulb-Anti-Hyper-Flash/273586446438?hash=item3fb305e066:m:m0Um1Xy-fc0ZUM4AwClwm6A&fits=Year%3A2017%7CMake%3AToyota%7CModel%3ACamry%7CTrim%3ASE%20Sedan%204-Door%7CSubmodel%3ASE%7CEngine%3A2.5L%202494CC%20152Cu.%20In.%20l4%20GAS%20DOHC%20Naturally%20Aspirated%7CEngine%20-%20Liter_Display%3A2.5L. BULB TYPE: look for 7443/7444 switcback anti hyperflash. Please confirm the car model during check or send them a message just to make sure.
Thank you for the high definition recording with no music, day and night time filming, detailed instructions, clear voice, suggestions, links, and high contrast diagrams/verbiage. This is hands down the best DIY car video I have ever seen. Keep up the phenomenal work. The car looks immaculate, too. Subscribed!
I just put mine in
@edlopez5k Thank you so much for the feedback.
🍡
Just installed these lastfit bulbs in my Camry and they are AMAZING! I did it all without removing any of the pieces of the tire arch covering. I just stuck my hand down in there and did it, it was hard but possible. I don’t have particularly long arms or anything
The led blue light works as fog lights and the amber color is the turn signal right ima try to do it that way tooo
What year is your camry?
@@CH_TM4Life 17
@@SaSpursFan thank you mine is 16 i already order to try them on
Does not hyper flash on turn signals?
I cant be the only one that died laughing when that 10mm socket just said "aight, imma head out"🤣
Appreciate your video. Very easy to install and took about an hour to install the high beam, low beam, interior lights, switchback lights and license plate lights.
2017 Camry Se. so I just want to start by adding that if your fog light bulb does not have 2 filaments inside of it these will not work. They have to be dual circuit for them to work hence the 2 filaments. 2nd they are not as bright as the original xse model are explained but they more than sufficient enough. I changed headlight with Lasfit LaAir 10000 lumen bulbs and they’re awesome except drl’s flicker. Waiting to hear back from lasfit as we speak. Any other question I will glad answer if you reply
THANK YOU SO MUCH FOR THE EXPLICIT INSTRUCTION! I JUST ORDERED SOME LED LIGHTS AND LOOK FORWARD TO INSTALLING THEM.
You’re welcome. My pleasure, enjoy
Did they hyper flash when putting left or right signal?
Easiest way to do this is just use a jack and go under as for Camry’s its an easy access . Pull it place the new one and you’re set . Only do this if you don’t have a jack . Just did it today . By the way they work perfectly!
Hi everybody, just a quick update on these LEDs. So far so good; the bulbs still perform perfectly fine. I also plan to do a video update on them soon to answer some of the questions I've had. Have a safe drive.
Looking forward to the update. I have a 17 SE with all the LEDs from your videos accept the switchback fog/turn signals. I have no issues accept I do have a flicker on the HB3/9005 LED headlight bulbs. I will be doing the switchback next week.
hello, I have a Camry 2016 SE, I also wanted to change the halogen lamps in the corners to such LED ones, I tried to install Chinese ones, but they work quickly, i.e. frequent blinking. I understand this relay turns swears. How does it work for you??? did you change the turn signal relay?? the relay is very difficult to change, very interesting, please share how you did it? Or is it already light bulbs with built-in resistors? or how ????
Any body send to link of amazon to buy it am in jordan plz
Just got a 2016 Toyota Camry SE, this definitely looks like something I want to do
Very nice, thank you for showing us and all your information! I appreciate it!
My pleasure.
@@randomreviews7210 I have 2015 SE Camry and turning signal light should also work as a DRL light together with with high beam. How come it doesn't blow a fuse or melt since the white light stays on when DRL is on?
Those things back of tires is a water flap to prevent water splashing into a mist into the driver behind you.
So these bulbs are plug & play? No need to run an extension wire to your fuse box?
What kind of head light bulb ?? Very nice
Thank you so much for a clear and concise tutorial. Really appreciate it! Keep up the great work!
I have 2015 SE Camry and the turning light should also work as a a DRL light together with with high beam. How come it doesn't blow a fuse or melt since the white light stays on when DRL is on?
@Athyr Y'el thank you for the feedback.
@@randomreviews7210 can. U tell me where u ordered them lights from
Awesome thanks for letting us know!
My pleasure.
I have used it the bulbs are of very good quality but the white light is not that bright as shown in the video so i swirched it to a different switchback led with resistors and its way brighter on both colours
Awesome thank you so much I have the exact same car and color, I will be following you from now on my man!!! It really does make it stand out! 😉
Hi, thank you for the feedback. Enjoy.
Very nice Toyota Camry, upgrade LED lights. Those are way brighter. I do not like the factory halogen lights or not the best LEDs are the best thumbs up on your video bro.
No fault on computer system or errors or notifications ???
how are these holding up with time?
Where did u order the switchback bulbs from
Nice video any way where did you buy the led signal light can i get those at auto zone or special order only
Are the bulbs available on Amazon?
Omg those are super bright
Lol looks brighter than DRLs 😁 (the turn signals)
I'd like to know what you think about anzo black led headlights for Camry 2015?
What's headlight bulbs are you using?
Looks great! Very nice Camry! 👌🏾
No error codes with these?
These hyper flash on my 16' Camry SE. ended up returning them 😢
2 things. If only they weren’t so darn expensive that would be great haha and if they came in red and white that would be perfect. I have 16 corolla and want to get red bulbs for my rear signals but for some reason Toyota is super picky with electronics I tried resistors and maybe didn’t install them right they flashed all wrong so I hope these error free no hyper flash work for me
I totally agree on the price point, just personal preference, I'm not a real big fan when it comes to an external resistor due to the amount of heat they produce. But these seem to work really well so far ua-cam.com/video/B_l1S61qnuI/v-deo.html good luck though
Where do I get this parts from? Thanks
My turn signals rear and front blink faster why?
But it's not switch back tho white light are still on while the amber light is flashing
Can you do the glove department light
Hey there, not too sure if you’re still active here. I got the exact same bulb from your video and I also have a 2017 Camry SE, but for some reason the bulb seems to be too long. Would you know if I somehow have a different part down there?
2015 and 16 Camry did not have option for fog lights at all. Just useing turn signal location for the white Day lights What did you upgrade the factory DRL next to headlight with. no led will work properly with toyotas system Thanks
Donde compro estas luces usted las vende
Could i get the links for them? The links in the description are not working for me! Please!
I has toyota carmy se 2016 and don't had fog light. wanted to add fog light on. I want to do likes your.
Great video,
I will definitely change my lights.
Thank again:-))
Changed my switchback bulbs to LED but they are blinking real fast on my 2016 Camry! Any suggestions?
also fits 2013+ avalon and 2014+ corolla
Where did you get your fog lights installed ?? Toyota doesn’t install them
The bulb works as a turn signal and fog light the white color is the fog light and the amber color is turn signal
Wow.. I really need one for my 2017 SE model. Any help please?
How do you keep the daylight led ON at night along with the headlights on ? Mine when you turn the headlight ON, the daylights turn OFF and instead the small fog lights turn on !! By the way mine is Camry 2016 hybrid Australia
Beautiful sight🖤💪👍
Very informative! Thank you.
How much was it and is it ez to install
What color bulb are the headlights? Those aren't 5000k are they?
Nice look man think I try this out
Are they still working?
I sorta have my doubts. The description of the bulbs says not to leave the blinking for longer than 8 minutes. But if you buy the switch backs, the white led is going to be running WAY longer because it's being used as a drl application. Will this not cause an overheating problem. The "no resistors" statement has me feeling fishy too. Sounds to good to be true for paying $60....further feedback would be nice.
I agree especially having them on during DRL. I always keep my DRL on for my 2015 SE Camry, however since the oem halogen stays on, it's hard to believe the led can do the same or won't blow a fuse since they generate heat 🔥. I like the idea of these light though
I've bought a cheaper product off amazon that's a drl switchback, it's very bright and works well. But, I've had to install resistors. Not bad, as long as you know what you're doing.
@@timothydoerrjr5911 can you share the link of your product?
@@DanSaleem
Vouke
4.1 out of 5 stars 436Reviews
7441 7443 7444 Canbus Turn Signal White/Yellow Switchback LED Light Bulbs 22 SMD with Projector, for Standard Socket, Not CK- Pair of 2 with load resistors
Obviously make sure you order your particular size but hope it helps
I want to put a resister. Can you tell me which wire color goes to the resister? I have a 2016 Toyota Camry SE.
Does this work on the le
My Camry switchback LED lights are blinking fast when i turn on my turn signal! What do i need to buy to stop this from flickering?
What’s the link or name to buy
Howz front led turn signal working are they still good
still running strong
@@randomreviews7210 thank u sir
I'm going to order the same 1s thanks !
Hey just wanna know if this is compatible to my 2015 Toyota Camry Altise ASV50R
Resistors might still be required in certain applications. Tried to do this on my 2017 Grand Caravan and needed resistors.
Cause thats a chrysler. Toyotas don't usually need resistors from my experience. All fiat chrysler dodge jeep needs resistors when it comes to turn signals. I know cause my Jeep's turn signals were bloating a few days later, one stopped working hence why I checked them.
I have 2015 camry without fog light on front bottom bumper. Just orange turn signal. If i add LASFIT bulb, will i see the white light when i turn on headlight?
Did u try this out? Did it work?
Yep, white light as a running light, almost like a fog light. But when signal is on, it flashes amber only. Great product.
Thanks for the feedback I'm going to buy it
Le puse las led regulares y las de abajo y cuando po go la alarma no me prenden las luces. Me podra ayudar si sabe.
Does it help light the road up at night I'm horrible with being able to see at night. Just wished these hyper flashed when using turn signal
Hi Barry, these are not bright enough to light up the road. I've been using these ua-cam.com/video/t0NuIs4e0Gs/v-deo.html for about 4 weeks now, and they are much brighter, easier to see and more pleasing to the eyes than the stock ones.
I had a seizure watching this video. Thanks. Cool lights by the way. Much love from the ER .
When your signal lights are in DRL mode *White*.... Why is it dim? But it is bright like crazy when signaling to amber.. is there a way to increase the intensity? thanks
How is it when you’re using the signal ? Does it blink fast ?
that's my question too, he did not show it so I'm kinda skeptical on this brand.
I have Accord Sedan, 2012 do you think it will work? The turn signal light it self ( orange) and the bulb as well
Awesome vid
Just bought the exact same ones on Amazon but they hyperflash on my 2016 toyota camry se 😢
Hi do you have the link?
Does this work on XSE models? I was just wondering since I would like to install this on my Camry!
yes bro it will work on XSE model cause all of them have the same plugs i also wanna install it in my camry 2002 se but its so much expensive in UAE just go for it :)
I installed this exact light bulbs on my 17 Camry XSE for my front turn signal and they didn't work as a switchback light with white/amber, they only worked as a regular amber turn signal with no white color even though the bulb have the white chips on it.
I looked at the listing for these, and it says will fit 1157.
The plug is totally different.
I put these same bulbs on my moms 2016 Toyota Camry, and here do not light up white. They blink yellow but no white light
Hey my brother, thanks for the great review, I was just wondering to put the led turn signals to the front, I have 2016 Toyota Camry XSE V6, but it already has white led fog. It’s just that I need only led turn signal. Do you think you can help me out with this? My camry has different headlights also, I don’t know maybe because it’s a V6 version. That would be awesome if where I can get led turn signals.
Thank you!
Yup, XSE comes with different turn signals/fog lights, but most likely they do take the same part which is 7443/7444, if yours takes one of these, then they should work. please check with your manufacture to get the exact bulb size/part.
It's probably two different bulbs in the xse
I believe one of the features that separate the upper trims from the lower trims is that LEs and SEs get halogens standard, the XLEs and XSEs get LEDs standard. I could be wrong, but I'm pretty sure I've seen an SE with halogens and an XLE with LEDs. I'm considering this upgrade because I want to restore DRL function with either low-beam headlights or switchbacks in the turn signal. None of the kits I've seen so far can turn off the white when the signal is activated, however. Toyota really should have implemented DRLs into the bumper mounted signals or just used the damned low-beams on full power for DRL. Whoever had this bright idea of low-power high-beams for DRL needs a good swift kick in the ass. Them and the inventor of CANBUS. That BS makes upgrading bulbs a nightmare.
Is the word “lasfit” upside down when installed? I installed mine and the word “lasfit” is upside down
Cool lights
Is that have Alavon?
Good video thanks.
Still have the Camry?
This would work on a 2016 Camry se?
They should work. Make sure to specify the car model and year during check out👍🏻
YES
Would these work for a 2015 Toyota Camry LE
Did u get to try this out?
Mine didn’t fit in my 17 camry 😢
How much its cost u
Wow that’s f***ing awesome!!! Soo bright asf:
I install these on my Camry but I noticed when I have my driver side on after a couple minutes it start to blink real fast
I am in Canada, and I would like to purchase this product. How can I buy this product ?
I tried to buy it by link, but it says, “this item does not ships to Canada”.
Hi Tariq, I highly recommend contacting the seller and see if they can arrange some sort of oversea/out of state shipping. Good luck!
I have one of those. However, the right side is giving me a hyperflash. The left side is okay. I had to switch them back to stock. Any ideas?
does the LED turn signal still light up even though it's hyperflashing? Either way, I'd definitely contact the seller about that, most likely it is manufacture's defect. Hope that help.
You need led resistor kit.
Please contact LASFIT customer service for support with your order information.
email: cs@lasfit.com
I bought some of these bulbs they are so dime not that bright. And the white led only turns on when the headlights are on.
I do same things but I dont know why no working or the light on
Any body send to link of amazon to buy it am in jordan plz
Hello, Is there have my car 2016 Toyota Avalon XLE?
hi, this particular bulb should fit 2016 Toyota Avalon XLE
same exact bulb fits.... camry and avalon literally have the same light wiring and module ,,,,well this light socket is,, the headlights for avalon share wiring with XLE/XSE camry
Can it fit for 2017 camry LE please?
Just did it, all it does is increase the brightness of the turn signal, thought switchback would give the bright light night driving as shown
Considering this upgrade, however -- I've checked and my car apparently has 7443 / 7444 factory, but I am curious if the three-wire setup here is high and low 12V for flasher / running light and a ground wire, or, if being an SE, the car in this video had factory fog lights? If so, I'm not sure this upgrade will be right or legal for my '15 LE without factory fogs. Can anyone answer this? Considering another kit that requires an additional lead from ACC, but also uses switchbacks.
Did u end up trying this on ur LE?
@@jadk734 No, I was simply trying to disable the factory DRLs and install an aftermarket DRL system that would allow me to run LED headlight bulbs. The kit I found was only for factory LED equipped cars, and the DRLs weren't that important to me other than passing inspection, so I ditched my aftermarket LED headlight bulbs, replaced H11s with modified H9s and 9005s with modified 9012HIRs (plenty of Internet info on doing this), then disabled the factory DRL controller in the stereo settings, only turning them on long enough to pass inspection, then turning them back off afterwards. I have to say, the H9s and 9012HIRs are just about as bright as the LED headlight bulbs I had, so I can't say I really miss them. Only question is whether an aftermarket stereo replacement would allow me to access the DRL setting without the factory head units installed. CanBus is the main problem with aftermarket lighting, and whoever came up with it is a jerk-off.
This is not switch back switch back mean when u turn the signal on white light goes away and when u turn the signal off white light comes back
Absolutely right, falls advertising sending mine back
Switchback simply means, switching back and fourth between two colors.
U get two function types.
One is white led drl, and then amber white amber white.
The other is white led drl, and turn off for amber off amber off. Than back to white.
That’s a switchback.
Hi. Were these installed on a Camry model with the factory LED daytime running lights (in lower bumper area near blinker) or on a non LED factory model (only daytime running lights on top near headlights)? I have the factory non-LED SE model and hoping these would be a direct replacement of the blinkers giving it the “switchback”’effect. Thanks!
memberFU hi, this is the non-LED SE model, and yes this is a direct replacement (white led fog light and amber led turn signal) “switchback look” kind of.
random reviews What was the exact part number on your package so I can order the exact ones as you? Thanks so much! 👍🏻
@@memberFU this is the direct link, ebay.to/2N9krZw hope this help. let me know if you have anymore questions
Thank you very much. Going to order them today. Still no issues with yours?
@@memberFU you're welcome. so far so good. enjoy.
Just changed mine in the same car and the white light is NOT anywhere as bright as yours seems.
The magic of using a camera at night. Is it at least good looking? I'm mostly looking to get rid of the yellow here
Why do they flash like that
0:56
Part # is 9046705090B1 in case anyone accidentally strips the sensitive screw
This works for Toyota Camry le 2016 someone now?
An epilepsy warning might have been nice for the flickering light...
Can you give me the exact name of the lights please they have so many
Here you go www.ebay.com/itm/LASFIT-3156-3157-7440-7443-1156-1157-LED-Turn-Signal-Light-Bulb-Anti-Hyper-Flash/273586446438?hash=item3fb305e066:m:m0Um1Xy-fc0ZUM4AwClwm6A&fits=Year%3A2017%7CMake%3AToyota%7CModel%3ACamry%7CTrim%3ASE%20Sedan%204-Door%7CSubmodel%3ASE%7CEngine%3A2.5L%202494CC%20152Cu.%20In.%20l4%20GAS%20DOHC%20Naturally%20Aspirated%7CEngine%20-%20Liter_Display%3A2.5L. BULB TYPE: look for 7443/7444 switcback anti hyperflash. Please confirm the car model during check or send them a message just to make sure.