Estimado; desde mucho tiempo he tenido muchas ganas de comprar una máquina como la que muestra, además la forma de relatar su experiencia me ha motivado aún más, recién estoy explorando está ruta, me gustaría saber de qué se trata el compresor de aire que UD menciona,desde ya estaré muy agradecida, gracias por su generosidad de entregar sus experiencias.
Thank you, I was wondering if this type of machine could handle using string on your working needle and you showed me that yes, it is possible to use it and without any problems. Thanks again. Axé 🙌🏾👳🏿♂️👳🏿♂️👳🏿♂️
hi from Chile! thanks for your explanation! I have a doubt when You thread (loop) did You take out the scissors? I ask You this because when You thread, You did through a short tube that it is different from the thread of the cut pile.
Hello and thanks for the great tutorial. I was wondering, what thickness of the yarn do you use and is it possible to use different thickness of the yarn on the same rug?
I bought a gun and not sure if it’s the cloth, but it seems to just keep tearing up the cloth. I just got done setting up and gave it a whirl but it’s tearing everything up. It is a cut pile gun, not sure if you’re able to assist please!
Have you tried pulling the piece of yarn that is at the end of the gun through the links cloth? I had the same problem but realized that with the hand method I always pulled the yarn through so I did that and it worked! Idk why he didn’t say to do that
Hi! What can you advise for a beginnre? Is it preferable to use different machines for loop and cut final result? Or can I buy a gun who does the two results?
Hi Tim! I am new to the rug tufting world. I am having a hard time getting my gun to glide across the monks cloth. I am putting enough pressure on the gun and attempting to move it in the direction the foot is facing, but it doesn’t seem to want to move and tears up the monks cloth. Any advice? Thank you!
Hello sir, I know haw to wieve by this machine and I can repair this machine too. Is there any place for me in your factory. I am from India. Please reply!
very nice work man ! on the website you provided what's the difference between guns such as Cut Pile Tufting Machine and Loop Pile Tufting Machine? I hope you can get back to me asap thank u (:
Is the trading of the cut-pile and loop the same? I have the loop pile machine and my needle does not seem to have hole that goes down like this one. I tried treading it through the needle-cylinder but it does not work. The machine just tear up the fabric and the thread does not come through the back properly...
@@tufttheworld I ordered it from a etsy seller called guloom.(I do wish I got it from your page in hindsight) I have been watching a lot of your videos after I ordered it, so I asked if it was the same model and according to them, they get the machine from the same manufacturer as you. Here's the cloth I bought with it: www.etsy.com/no-en/listing/675071671/punch-needle-embroidery-fabric-tufting?ref=yr_purchases
If you received your machine from TTW you were automatically sent a link to a set of videos for your machine, including one on how to attach the handle. Email us at support@tufttheworld.com if you can't find it.
@@mitchio83 nah but I got bead wire and made my own by just wrapping the wire around the top bold and then making a circular loooo for the yarn and then secured it more by just continuing to wrap it around.
Just bought one of your machines. I can't wait to start making some custom rugs soon. Cheers!✊🏾
How'd it go
Estimado; desde mucho tiempo he tenido muchas ganas de comprar una máquina como la que muestra, además la forma de relatar su experiencia me ha motivado aún más, recién estoy explorando está ruta, me gustaría saber de qué se trata el compresor de aire que UD menciona,desde ya estaré muy agradecida, gracias por su generosidad de entregar sus experiencias.
Thank you for all your videos you help alot of people out .
Thank you, I was wondering if this type of machine could handle using string on your working needle and you showed me that yes, it is possible to use it and without any problems. Thanks again.
Axé 🙌🏾👳🏿♂️👳🏿♂️👳🏿♂️
hi from Chile! thanks for your explanation! I have a doubt when You thread (loop) did You take out the scissors? I ask You this because when You thread, You did through a short tube that it is different from the thread of the cut pile.
Hello and thanks for the great tutorial. I was wondering, what thickness of the yarn do you use and is it possible to use different thickness of the yarn on the same rug?
I bought a gun and not sure if it’s the cloth, but it seems to just keep tearing up the cloth. I just got done setting up and gave it a whirl but it’s tearing everything up. It is a cut pile gun, not sure if you’re able to assist please!
This is exactly what is happening to you me. How did you fix this problem?
Same thing is happening to me.
Same here
Have you tried pulling the piece of yarn that is at the end of the gun through the links cloth? I had the same problem but realized that with the hand method I always pulled the yarn through so I did that and it worked! Idk why he didn’t say to do that
Does the fabric need to be very *tight*? How do I avoid big holes in the fabric? Thank you!!
How do you stop the yarn from falling out? It needs a tighter hole
Thank you for this video! Would you think a tufting gun would be too loud for an apartment? I’m looking to start doing this when I move into one.
Not seeing how to do loop pile, did you change the attachment?
If I got by mistake the loop pile, is there any way to make the finishing as cut pile?
Wonderful love you work 😊
My machine doesn’t have the little spring looking thing that feeds the yarn through. What gives?
Hi, my concern is how many loops you have on the back of your work.
Thank you, kindly.
Hey I'm a brand new to tufting and i have a tufting gun that I think is missing pieces just need some help and guidance
i wonder why my machine cut the canvas and the loop wont stay?
I used a punch needle fabrics.
Hi! What can you advise for a beginnre? Is it preferable to use different machines for loop and cut final result? Or can I buy a gun who does the two results?
Thank you for this video, sir!
Hello, my rope is constantly flying out of the gun what can I do
Yarn keeps cutting when I first start tufting
do u needs cut and loop gun or should I invest in a cut gun only
thank u so much !!!
What kind of fabric you are using
Hi Tim! I am new to the rug tufting world. I am having a hard time getting my gun to glide across the monks cloth. I am putting enough pressure on the gun and attempting to move it in the direction the foot is facing, but it doesn’t seem to want to move and tears up the monks cloth. Any advice? Thank you!
I should also mention it is loop pile.
@@morgandoyle8430 Hi i know this is late but it seems you have a too tight a gauge of monkscloth. You need some with a looser weave :)
Did you figure it out
Nice machine. How can i get or have a second one or new one please?
Hello sir,
I know haw to wieve by this machine and I can repair this machine too. Is there any place for me in your factory. I am from India. Please reply!
Hey! I have a question. What material do you use for the Rug Cloth (I mean the fabric you extend and put on the frame). Thank you in advance!
Monk’s cloth
Some use burlap, including myself. It’s more of a risk of tearing but it’s a much cheaper option than monk’s cloth.
I tried this for first time yesterday. It only made hole in wool Queen cloth. What am I doing wrong?
There are a lot of tips and support in our online community here: community.tufttheworld.com/feed
very nice work man ! on the website you provided what's the difference between guns such as Cut Pile Tufting Machine and Loop Pile Tufting Machine? I hope you can get back to me asap thank u (:
Tim Eads ily
من اين احصل على الآلة الخياطة من فضلك اريد واحدة
I bought one it takes a long time and when I got it it did not work,it never come on...i email no response yet...please help.
Please be patient with a response. It takes about 1 business day to get back.
How to setting the cut pile machines?
At 29 seconds towards the end of video u can hear the camera man laughing 😂 at his ass
Did you use two different type of tufting guns? Sorry confused
I think they sell two different models
Yes he did. The first one was the one that cuts the yarn at the other side and the other crests a loop
Is the trading of the cut-pile and loop the same? I have the loop pile machine and my needle does not seem to have hole that goes down like this one. I tried treading it through the needle-cylinder but it does not work. The machine just tear up the fabric and the thread does not come through the back properly...
@@tufttheworld I ordered it from a etsy seller called guloom.(I do wish I got it from your page in hindsight) I have been watching a lot of your videos after I ordered it, so I asked if it was the same model and according to them, they get the machine from the same manufacturer as you. Here's the cloth I bought with it: www.etsy.com/no-en/listing/675071671/punch-needle-embroidery-fabric-tufting?ref=yr_purchases
@@pepsimarx1254 i just bought the same machine! did you ever find a solution? bc now im worried haha
@@trinity5114 Ha! yes, no need to worry, it just threads differently. The loop one you just pull through from the back of the "needle" to the front
@@pepsimarx1254 LOL glad to hear! thank you:)
У́збекистонга хам совга килиб жу́натинг бир дона тафтинг 👍
my gun didn't come with the little loop to thread the yarn through. what do i do
You can either contact the manufacturer or send and email to support@tufttheworld.com and we'll sell you one.
وين يمكن احصل على هذا المكينه
What cloth can we use instead of monks cloth?
The best cloth is what I'm using here, which is primary tufting cloth
Whenever I try to use the gun. It seems to just be making holes in the cloth. What could be the problem ?
How you slow down te gun???
Has anyone ever mounted one of these on a 3d printer like platform? (Or really, a 'pen plotter' platform, if you catch my drift)
Yes! First one was made 10-15 years ago. I actually just bought one myself and excited to see it in action
How do you attach the swivel handle ?
If you received your machine from TTW you were automatically sent a link to a set of videos for your machine, including one on how to attach the handle. Email us at support@tufttheworld.com if you can't find it.
my gun didnt come with the metal loop hole part where can i buy it
I'm in the same boat
Does it work okay without that part?
@@mitchio83 nah but I got bead wire and made my own by just wrapping the wire around the top bold and then making a circular loooo for the yarn and then secured it more by just continuing to wrap it around.
@@grace-by5tz check my reply to Kanye twitty
I want one, how much it’s cost?
Translate from this from german to english es kostet ungefähr 130-300 dollar kommt auf das modell an
Mai esko achi tarh se bunaye kar leta ho
حطلها زيت اعم حرام عليك😅😅
Where can i buy the tufting gun machine?