Thank you George 😊 hours and hours of work and another hour of rendering for a few minutes of footage. Glad you can appreciate all that goes into it. 💪🏼💪🏼
@@thetriggerman954 Hey it's funny when some known painters upload 720p videos and shows how good it is. With 720p resolution everything will look good. But with 4k you can see the orange peel and all other things....
Hey Trigger, another great review from the Trigg again👏those Sundstrom SR200 masks are very well made and even the polycarbonate visor is totally thinners proof as I have the airfed version of this mask with the polycarbonate visor which I've had for around 4 years and the visor is still like new with no marks or scratches on it plus I never use any tear offs👌 It was good chatting to you the other day about these masks Trigger I never knew about the backpacks for them until you told me which looks very compact and is close to your body where the 3M ones seem to stick out more which can give you a back ache🙏👍John UK
Thanks John I didn't know they the polycarbonate was scratch and chemical resistant that's good to know. Gives the viewers another great option. And the backpack really looks cool. 10x better than the V-flo. Always great chatting my man 🫡🤝
Looks like good design ... I like the fresh air hose option ... again ... I'm wondering about using it with glasses ... cool video ... your the man Trigger ...
@@Sprayedbydre not yet, I'm working on a few things. Trying to find the cheapest price. Working with the company on distributors. Should have something soon.
Thanks trigg respiratory care is a must in this trade good clean air is 100% the most important factor when doing this chemical absorption is a slow killer nice vid sir 👏👏
Thank you Mr. Brown. The 3rd installment of this full face mask series is dedicated to you. Special shot out in the video to you 😉 it's dropping Friday.
@@NicholasCollie it's a tough call they both are great masks. I like this one probably a little more because of its versatility, to be able to use it with an air fed system as well as powered air so you basically have three or four different masks in one. That alone makes it shine more than the draeger. But if neither of those were a concern the The draeger feels a lot more secure. So they both shine in their own way.
Nice mask. The versatility of it to use different supplied. Air systems is nice. However, if you’re going to use air from a compressor, that air has to be certified as breathing air. Can’t just hook it to any compressor. We use supplied air systems in the Fire Service and all of that has to be certified as breathing air. Too many contaminants could really get you sick or dead. .
I used them in the past it there was a breathing filtration system inside the booth that a company came in and Inspected regularly, the air compressors weren't the best but inside they had a huge filtration system I remember it having a green light if good and a red light not to breathe. Thanks for the tip much appreciated
Hey Trigger, hope your having a great weekend. Is this mask the same as the stainless steal ring with the double cartridge? I'm looking into it but now I don't know which one to get lol....I've only used 3M half masks and in some instances, my eyelids are sticky which is a no no. I'm getting into full face mask. And like always, great finish. Thanks man
This one is slightly different from the Dragar mask with the stainless steel bezel. It's a tough call they both are great masks I'd say the top 2 in the industry. Which is why I wanted to demo them for you guys.
@@thetriggerman954 Thanks for the demo and very detailed info on these masks. Coming from you I can't go wrong with either one. I appreciate you man. Blessings
Can clear coat change the entire tone/shade of a color? say you 'spot' in a very small 2" x 4" spot on the fender you sprayed in this video, then cleared the entire fender..unmask and then the entire fender is off by a couple shades?
@@ammreid it can cause a slight change of 4-5 heavy coats but 1 or 2 coats of clear it shouldn't change it much. Unless it's some real garbage clear coat. But it's rare
@@thetriggerman954 It's way off, I'm going to sand it back down and try a different clear, I used some Speedokote Super fast drying clear, forgot the exact one. Or my other thought was maybe the surrounding door panel is just "dirty" Hazy and I need buff it out to get the 'true' color back. The panel sprayed looks very grey and the surrounding panels look grey/brownish. Maybe it's just dirty and when buffed the original color will be more closer to the new sprayed panel. Thanks
@@ammreid if clear changes the color adding more clear won't correct it. You'll need to base the entire panel with the correct color then clear it with better clear, some of those speedokote clears are acrylic and not that great.
@@thetriggerman954 I was thinking since that small fist size section was airbrushed in and blended to surrounding area..that I could just sand the new clear back down to the old clear right before the basecoat...so that I can just put new clear right over the Original paint..to avoid and color match problems.. you're saying it's best to sand it, then base the entire panel, then clean ?...
Love that color. Had an 86 Towncar that color.
I asked on one of your shorts what the price was, but i just saw this video & i hit the link 👌🏾💯 I like this mask.
Very nice mask 👌🏼💪🏼
The quality of this video is NICE! 🔥👌🏾 whatever camera you're using is bada$$!
Thank you Tony, playing with a few camera settings trying to give you guys a better viewing experience 😉 glad it's working and you're enjoying it 💪🏼
Hey 👋 thanks for another option! Video quality seems better too 🎉
@thetriggerman954 You're welcome Trig! It's definitely working. Keep up the good work Bro! 🫱🏿🫲🏾
@@Tonytalks1980 🫡✊🏼
Cool, sweat catching system specialy😊👍
That 4k video looks great!!!
Thank you George 😊 hours and hours of work and another hour of rendering for a few minutes of footage. Glad you can appreciate all that goes into it. 💪🏼💪🏼
@@thetriggerman954 Hey it's funny when some known painters upload 720p videos and shows how good it is. With 720p resolution everything will look good. But with 4k you can see the orange peel and all other things....
@@georgeg8130 so maybe I need to go down to 720 hide more stuff 🤣🤗
Hey Trigger, another great review from the Trigg again👏those Sundstrom SR200 masks are very well made and even the polycarbonate visor is totally thinners proof as I have the airfed version of this mask with the polycarbonate visor which I've had for around 4 years and the visor is still like new with no marks or scratches on it plus I never use any tear offs👌
It was good chatting to you the other day about these masks Trigger I never knew about the backpacks for them until you told me which looks very compact and is close to your body where the 3M ones seem to stick out more which can give you a back ache🙏👍John UK
Thanks John I didn't know they the polycarbonate was scratch and chemical resistant that's good to know. Gives the viewers another great option. And the backpack really looks cool. 10x better than the V-flo. Always great chatting my man 🫡🤝
Yeah had mine a few years now and it's still like new👌
Looks like good design ... I like the fresh air hose option ... again ... I'm wondering about using it with glasses ... cool video ... your the man Trigger ...
Yea that fresh air design looks sweet. Thank you Joe I appreciate you my man 🫡✊🏼
Contact the seller, they will tell u
Great Job Trigger 👏 👍🏻 👌 ❤🔥
@@jamesquinnie7573 thank you brother. Appreciate your continued support 💯💪🏼
@thetriggerman954 You're Very Welcome Trigger!!💪💯
Awesome vid, great safety tip.
Thanks man much appreciated 💪🏼
How about some outside videos with no booth for the lower budget painters. Yes I know possible fish eyes from moisture or dust from a dirt driveway
I have a few videos spraying out in the open shop. Check out some of my videos
Thanks 👍
Good tips my brother
🫡
Pricy but not as much as later health issues. Good stuff
Thank you
🙌 #safetyfirst #keepbreathing
G'day Trigga 😊
@@Brooksyscarrestorations whaaaat up my man 🙋🏼♂️
Oh I like the powered air with the glass lens!! That’s what I want. That looks sick! Price?
Yeah man that looks sexy as hell 😍😍 I think I might go that route tooo. I think the whole rest of the set up is like $800-$1000. After the mask.
@@thetriggerman954 way better deal then the versa flow!
Is there a link to the fresh air system that attaches to the mask? The battery powered one
@@Sprayedbydre not yet, I'm working on a few things. Trying to find the cheapest price. Working with the company on distributors. Should have something soon.
Thanks trigg respiratory care is a must in this trade good clean air is 100% the most important factor when doing this chemical absorption is a slow killer nice vid sir 👏👏
Thank you Mr. Brown. The 3rd installment of this full face mask series is dedicated to you. Special shot out in the video to you 😉 it's dropping Friday.
@@thetriggerman954 looking forward to it t man 😊😊😊😊😊😊
My father told me to check my mask like that but also put your hands on the exhaust and try to blow out.
Your father was a smart man 😉💪🏼
@@thetriggerman954 he’s big on safety. Everything except the eyes 😂😂😂 he doesn’t like wiping a mask all the time..
Where inget that protective jacket?
@@joeltorres3202 ?
do you like this one better than the drager?
@@NicholasCollie it's a tough call they both are great masks. I like this one probably a little more because of its versatility, to be able to use it with an air fed system as well as powered air so you basically have three or four different masks in one. That alone makes it shine more than the draeger. But if neither of those were a concern the The draeger feels a lot more secure. So they both shine in their own way.
Those paint fumes dont affect me, affect me, affect me. 😆
@@WordAboveAll 🙈😅😅 man you are cr cr cr cr cr cr crazy
As always, nice presentation TriggerMan! 👏😁🤙
Apart from the features, which mask do you like better, the Sundström or the Dräger? 🙃
@@Macaco_Branco Nooooo don't ask 🙈
@@thetriggerman954 That's what I thought...🙈😂
Nice mask. The versatility of it to use different supplied. Air systems is nice. However, if you’re going to use air from a compressor, that air has to be certified as breathing air. Can’t just hook it to any compressor. We use supplied air systems in the Fire Service and all of that has to be certified as breathing air. Too many contaminants could really get you sick or dead. .
I used them in the past it there was a breathing filtration system inside the booth that a company came in and Inspected regularly, the air compressors weren't the best but inside they had a huge filtration system I remember it having a green light if good and a red light not to breathe. Thanks for the tip much appreciated
Hey, just curious about the luma3 lab coat and how do I buy one of these? I didnt even see them on there website.
lumaiii.com/product/spray-paint-suit/
Hit the drop down for paint suit color and select lab coat
Thank you very much! I’ve learned a lot from your channel, thank you for getting back with me!
Hey Trigger, hope your having a great weekend. Is this mask the same as the stainless steal ring with the double cartridge? I'm looking into it but now I don't know which one to get lol....I've only used 3M half masks and in some instances, my eyelids are sticky which is a no no. I'm getting into full face mask. And like always, great finish. Thanks man
This one is slightly different from the Dragar mask with the stainless steel bezel. It's a tough call they both are great masks I'd say the top 2 in the industry. Which is why I wanted to demo them for you guys.
@@thetriggerman954 Thanks for the demo and very detailed info on these masks. Coming from you I can't go wrong with either one. I appreciate you man. Blessings
@@justice5699 more then welcome 🤗 glad I could help
Can clear coat change the entire tone/shade of a color? say you 'spot' in a very small 2" x 4" spot on the fender you sprayed in this video, then cleared the entire fender..unmask and then the entire fender is off by a couple shades?
@@ammreid it can cause a slight change of 4-5 heavy coats but 1 or 2 coats of clear it shouldn't change it much. Unless it's some real garbage clear coat. But it's rare
@@thetriggerman954 It's way off, I'm going to sand it back down and try a different clear, I used some Speedokote Super fast drying clear, forgot the exact one. Or my other thought was maybe the surrounding door panel is just "dirty" Hazy and I need buff it out to get the 'true' color back. The panel sprayed looks very grey and the surrounding panels look grey/brownish. Maybe it's just dirty and when buffed the original color will be more closer to the new sprayed panel. Thanks
@@ammreid if clear changes the color adding more clear won't correct it. You'll need to base the entire panel with the correct color then clear it with better clear, some of those speedokote clears are acrylic and not that great.
@@thetriggerman954 I was thinking since that small fist size section was airbrushed in and blended to surrounding area..that I could just sand the new clear back down to the old clear right before the basecoat...so that I can just put new clear right over the Original paint..to avoid and color match problems.. you're saying it's best to sand it, then base the entire panel, then clean ?...
@ammreid correct, if clear changed it like you're saying. It's now a different color
💰💰💰🤑