loved this video man. straight to the point, no annoying unnecessary back story, or intro music splash screens, or 20 minutes of nonsense before getting to the actual meat. and you put torque specs in there. legit was refreshing. thanks for you work!
As always, your videos are top notch. Got the linkage replaced inside a couple hours and even think the alignment is halfway decent. My bud that helped me couldn't stop talking about how awesome your vids are. We've used three so far just this month on replacing axles, ball joints, steering gear, and driveshaft. Thanks again, man!
OK, done & dusted! All new steering linkage and stabilizer shock installed... Whew! Took me a lot longer than than expected, but doesn't it always? LOL.. I did the track bar yesterday, and yes, gettin the cotter key off the castle nut on the frame side was a BEACH! Thanks again Ray.. You are the man!!
Im so grateful that you exist and basically have repaired everything on the same model Jeep that I have. Also your videos are flawless. Simple, quick and clear... but so many people mess that up with repair videos
Very well done, young man! "No problems, only solutions." I need to do this to my 1993 Grand Cherokee. I replaced the steering stabilizer and trackbar, but still have a wobble. I think I basically need to replace every steering component and bushing up front.
Did you have your wheels re-aligned after lifting your GCH? Especially check whether the front wheels are not converging. You need to make them slightly divergent. This helps to suppress the wobble... Of course exchange every component, where there is some backlash...
Your videos are timeless with the ZJ’s. You’re no bullshit style is impeccable as well! I watch all your stuff working on mine and it takes away any headaches. (I’m not a mechanic) Appreciate you bro! Thanks
This must have been one of the best videos I have ever seen in terms of information, camera cuts and quality. I dont even own an ZJ and still watched it.
I have a 98 grand Cherokee that had the death wobble. I used your video for this repair, have never done a big suspension repair before, I just wanted to show my appreciation, you are excellent in front of the camera...Da Bomb, hope to see more from you...
Thank you for making this tutorial. I really appreciate your "to the point" d-i-y style, along with your attention to the details, even providing torque specs and socket, wrench and tool sizes. An excellent video for ZJ steering components restoration!
Funny story about doing this a couple weeks ago. Was getting everything ready to install, putting the zero fittings on and noticed one didn't have one drilled. I was cursing Moog up and down, Googling how and if you can drill them. So I drilled it out and went to put grease in it and next thing you know grease shoots out a hole in the side.. Yeah, the hole for the zero fitting on the drag link I believe.
leakyjeep5.9 haha seems like moog is loosing their quality. theres a guy with a 5.9 that just commented on this video needing help removing the steering stabilizer, I told him to try hitting it with his purse... maybe you can offer better advice haha
+BARRICADE GARAGE Damn auto correct, I meant to say there was already a zerk fitting on the side for better clearance, so I end up with 2 holes lol. My original stabilizer popped right off, with the right tool(pitman or tie rod puller) and some heat gun action of course.
Your videos are a life saver dude. I’m finishing up my 4” rough country lift on my ZJ today and I’ve watched a bunch of your videos over and over for help along the way
Love your videos. Short and straight to the point. I went with the synergy manufacturing drag link tie rod assembly because of my lift. Its beefy but because of its heavy design it feels sluggish when you're driving above 35mph.
Brandon Klinger I put a 2 inch lift on this ZJ so I just went with the OEM style replacement. Rides great and the wife loves it. thanks for support the channel bro.
Yo 1:27 That's that feeling when you finally get that old junk beat out after it's been in there for 20 years. I know the feeling. Love the video. Thanks man
I'm doing the same parts to a 96' XJ, this was a great reference to see the parts com apart from the vehicle, even though they are slightly different ;) Thanks!
I’ve been doing the same things to my ZJ. I actually ran out and bought the same Milwaukee tools you’ve been using. Thanks for making these videos. Sure mad my life easier! 🙏
Bro you videos are the best ive ever followed. Simple to the point no bs. Great content. You helped me with using the ball joint remover. Keep that ish up man.
Just a tip from the old timers that taught me to you, never ever hit the tie rod ends from the top like you did, instead you want to hit the casting that goes around stud with a mallet as it will deform slightly and drop right down, but hitting it from the top can cause several different issues one of which is a gigantic pain in the ass if / when it does happen.
Just found your videos. You do excellent work with explaining and showing. Gotta love anti seize no matter what you do it gets all over but well worth it.
Bro I never comment on any video I watch, But I gotta say... the execution of this video is flawless. great angles, lighting, video/audio quality is spot on. delivery of information was direct, no nonsense, no confusion... I've never been so impressed with youtube content lmao. Big help G, thanks!
Doing my 96' soon. Always nice to see someone get on these things before I have to. lol "a little anti seize.. " You mean a shit ton! lol Good job, I feel better tackling it.
PT Johnson Steering stabilizers are similar to shock absorbers. While those dampen the suspension, the steering stabilizer dampens the steering. If you’re driving, and a tire hits a pothole, it tends to cause the steering linkage to jerk, and this gets transmitted to the steering wheel. A steering stabilizer absorbs that energy and slows it down considerably which allows for more controlled steering, and less chance of you losing your grip. However, you dont have to run a steering stabilizer if you have proper steering geometry and I know people with lifted Jeeps that dont, so in that instance it boils down to comfort and preference
This is great - I have a question though... do you know if on your 97, is it the same exact layout as on the 97-01 XJ Cherokee? I'm about to embark on a rebuild myself...
These are some some quality mf videos lol shout out man, your videos are awesome. Straight to the point, I can hear you loud and clear, and the video is never shaky. You def have a supporter from me
And the fact you give every piece of info someone would need. I.e. what a part does, what it connects to and where. Plus torque specs on each bolt? Bruhhh killing it lol
The only mechanic I watch. But off topic my power steering has a electric solenoid on top of the high pressure side of the pump it's self. I can't find it anywhere, not even in the book. Dealer wants $200 for a new one, and I can't find a pick a part with the same thing. Eliminating it (solenoid) shouldn't make a problem should it? Thanks
still best video out there came back to do my stabilizer bar after already doing tie rods and sleeve n drag ling n ties to that wound up saving money so i bought a new stabilizer bar just cause and thnx again for the clear video and ibs per on tightening
Demo 7241 this came in a 15pc front end kit that I ordered from detroit axle... my other ZJ has a 3.5 lift and I used this 15pc kit I ordered online from ebay www.ebay.com/itm/15PCS-Suspension-Ball-Joint-Control-Arm-Kit-For-1996-1998-Jeep-Grand-Cherokee-/272826015395
Very informative - no rambling dialogue or excuses , no BS !!!
- just getting down to business - love it - keep up the good work !
We have no problems, only solutions! Love it man. Great instructions. Keep it going!
Michael Perry thanks!
Camera work and information details are impressive. Thanks.
I agree
video skills, technical mechanical skills, teaching skills...…..A+. Really helps me with my daughter's ZJ
I’ve done dozens of these on our jeeps and never ever did I consider taking the whole damn thing off at one time. Fantastic video man!!!
loved this video man. straight to the point, no annoying unnecessary back story, or intro music splash screens, or 20 minutes of nonsense before getting to the actual meat. and you put torque specs in there. legit was refreshing. thanks for you work!
As always, your videos are top notch. Got the linkage replaced inside a couple hours and even think the alignment is halfway decent. My bud that helped me couldn't stop talking about how awesome your vids are. We've used three so far just this month on replacing axles, ball joints, steering gear, and driveshaft. Thanks again, man!
OK, done & dusted! All new steering linkage and stabilizer shock installed... Whew! Took me a lot longer than than expected, but doesn't it always? LOL.. I did the track bar yesterday, and yes, gettin the cotter key off the castle nut on the frame side was a BEACH! Thanks again Ray.. You are the man!!
You got it done done, good job!
Feels good knowing thats taken care of
Im so grateful that you exist and basically have repaired everything on the same model Jeep that I have. Also your videos are flawless. Simple, quick and clear... but so many people mess that up with repair videos
Barricade is always my go to no bullshit tutorial, straight to the point. Not a lot of talking. Just serious work. Also awesome editing.
This guy is a master and a born teacher. These are fantastically informative videos.
The best, best, BEST tie rod replacement vid out there. Well done, sir!
You and BleepinJeep are the most informative channels about Jeeps... Thank you!
I’m not sure which is your better talent, mechanics, or, videography...
Great assistant too! Thanks for all your hard work...
Easily the most informative video out there for this process. I wish more UA-camr mechanics would watch this video and see how it's done.
my man even giviv torque specs.. i'll watch this over worldstar anyday
Been searching for a clear and concise video for all of the parts you mentioned and worked on here, so glad i found this!
Very well done, young man! "No problems, only solutions." I need to do this to my 1993 Grand Cherokee. I replaced the steering stabilizer and trackbar, but still have a wobble. I think I basically need to replace every steering component and bushing up front.
Did you have your wheels re-aligned after lifting your GCH? Especially check whether the front wheels are not converging. You need to make them slightly divergent. This helps to suppress the wobble... Of course exchange every component, where there is some backlash...
Your videos are timeless with the ZJ’s. You’re no bullshit style is impeccable as well! I watch all your stuff working on mine and it takes away any headaches. (I’m not a mechanic)
Appreciate you bro! Thanks
This must have been one of the best videos I have ever seen in terms of information, camera cuts and quality. I dont even own an ZJ and still watched it.
I have a 98 grand Cherokee that had the death wobble. I used your video for this repair, have never done a big suspension repair before, I just wanted to show my appreciation, you are excellent in front of the camera...Da Bomb, hope to see more from you...
Thank you for making this tutorial. I really appreciate your "to the point" d-i-y style, along with your attention to the details, even providing torque specs and socket, wrench and tool sizes. An excellent video for ZJ steering components restoration!
Your basic ZJ maintenance stuff is neat, clear and well filmed. Subscribed!
I bought a 94 ZJ with a 4.0L and your videos are my go to if i cant figure something out! You do a GREAT job of explaining literally everything!
I always get the urge to learn how to mechanic but then I watch your videos and my urge is satisfied. Another great video!
Funny story about doing this a couple weeks ago. Was getting everything ready to install, putting the zero fittings on and noticed one didn't have one drilled. I was cursing Moog up and down, Googling how and if you can drill them. So I drilled it out and went to put grease in it and next thing you know grease shoots out a hole in the side.. Yeah, the hole for the zero fitting on the drag link I believe.
leakyjeep5.9 haha seems like moog is loosing their quality.
theres a guy with a 5.9 that just commented on this video needing help removing the steering stabilizer, I told him to try hitting it with his purse... maybe you can offer better advice haha
+BARRICADE GARAGE
Damn auto correct, I meant to say there was already a zerk fitting on the side for better clearance, so I end up with 2 holes lol.
My original stabilizer popped right off, with the right tool(pitman or tie rod puller) and some heat gun action of course.
Your videos are a life saver dude. I’m finishing up my 4” rough country lift on my ZJ today and I’ve watched a bunch of your videos over and over for help along the way
Your videos are BADASS!!! Keep putting them out. A woman here and I learn how to do all the work on my 97 Jeep Cherokee xj through YOU!!! Thank you
Love your videos. Short and straight to the point. I went with the synergy manufacturing drag link tie rod assembly because of my lift. Its beefy but because of its heavy design it feels sluggish when you're driving above 35mph.
Brandon Klinger I put a 2 inch lift on this ZJ so I just went with the OEM style replacement. Rides great and the wife loves it. thanks for support the channel bro.
I really like this video because one, it is informative, and two it wasn’t 25 to 30 minutes long like most videos. Well done 👍
You do GREAT videos man. You've helped me redo so much on my ZJ. Thanks!
Im glad I could help out and thanks for watching
By far the best informative video I've ever seen, the time an effort you put into every aspect is amazing. 👍👍
No one makes better videos than you. Thanks for all you do!
Great video production. Fast simple and easy to follow.
Yo 1:27 That's that feeling when you finally get that old junk beat out after it's been in there for 20 years. I know the feeling. Love the video. Thanks man
Damn, you Rock Dude! You helped me with some of your other videos finding annoying knocks and loose feeling steering. Thanks!
I'm doing the same parts to a 96' XJ, this was a great reference to see the parts com apart from the vehicle, even though they are slightly different ;) Thanks!
JesseWeirdo glad i could be of some help. purging the air from the system is the most important part
I’ve been doing the same things to my ZJ. I actually ran out and bought the same Milwaukee tools you’ve been using. Thanks for making these videos. Sure mad my life easier! 🙏
I couldn’t find all the torque specs before watching this. Super helpful
Bro you videos are the best ive ever followed. Simple to the point no bs. Great content. You helped me with using the ball joint remover. Keep that ish up man.
Just a tip from the old timers that taught me to you, never ever hit the tie rod ends from the top like you did, instead you want to hit the casting that goes around stud with a mallet as it will deform slightly and drop right down, but hitting it from the top can cause several different issues one of which is a gigantic pain in the ass if / when it does happen.
This is the only channel I go to for repairs... 💯
video on this is very informative...nice camera work. ive done alot of these and you made it look easy... props man...nice work.
Best tutorial ever. Great no nonsense horse dookie. Also. Never sieze. Big props for that.
Excellent camera and explanation for this project. Thanks for the time and energy you provided for the Auto community. Kudos
I followed along with this and your wheel bearing video and did it all myself. Would have been much harder without these videos man you’re awesome
Spot on ! Quick & to the point ! No worthless chatter, as usual !
Love your videos ❤ !!!
i did everything like this on my XJ and GOT DAMN the steering is amazing now
Just found your videos. You do excellent work with explaining and showing. Gotta love anti seize no matter what you do it gets all over but well worth it.
well done! Great videography, great mechanic's skills, instructive - AND NO B.S. or profanity. Perfect! I have this task in the que for my XJ>
Bro I never comment on any video I watch, But I gotta say... the execution of this video is flawless. great angles, lighting, video/audio quality is spot on. delivery of information was direct, no nonsense, no confusion... I've never been so impressed with youtube content lmao. Big help G, thanks!
Thanks brother for all the detailed information in your videos. You have saved me a shit ton of dollars on my jeep.💯😎😎👽👌💨💨🍻 keep up the great work!!
Thanks for watching
dude : *bangs hammer underneath the car*
girl: what the hell was that?
Doing my 96' soon. Always nice to see someone get on these things before I have to. lol "a little anti seize.. " You mean a shit ton! lol Good job, I feel better tackling it.
Great work, nice and tight info video without BS.
By far the best video with explanation that I have ever watched. Thank you,you were very helpful.
youre gangster bro. clear, direct, concise, no bullsh. thank you🤙🏼
"We have no problems, only solutions!" That's the attitude!
You make it look easy. Why do some vehicles use a stabilizer and some don't?
Thanks for sharing your experience.
PT Johnson Steering stabilizers are similar to shock absorbers. While those dampen the suspension, the steering stabilizer dampens the steering. If you’re driving, and a tire hits a pothole, it tends to cause the steering linkage to jerk, and this gets transmitted to the steering wheel. A steering stabilizer absorbs that energy and slows it down considerably which allows for more controlled steering, and less chance of you losing your grip. However, you dont have to run a steering stabilizer if you have proper steering geometry and I know people with lifted Jeeps that dont, so in that instance it boils down to comfort and preference
Thanks, appreciate your response.
It's a JEEP THING, FACT, like a lot of other things.
Finally a we'll detailed video.
Thank you for taking the time to make this
You the man, awesome easy to follow instructions.
Bro.. Thanks for all your hard work......Your video are great..... Out here from California.......
Thanks for the support
You should definitely have more subscribers, quality videos!
Man you make it look super easy lol thanks for the videos and congrats cause your pretty good man
+Juan Duarte thanks. It is pretty easy. The hardest part is telling yourself to get out there and do it.
Nice job. You must live back east where there's a lot of rust because that's a lot of anti seize. Here in Phoenix we don't have that problem. LOL
Yes! I love your videos. Clean, concise, and informative! Thank you!
Best video I've found!! Sockect sizes, torque specs you're awesome thanks man!
Great content, learned how to DIY my CJ now...
Another quality video. Big ups!
Nice tools, those Milwaukee's make the job a lot easier!
Excellent video. Perfect descriptions and camera work
Thanks for taking the time to give torquing specs, I appreciate that.
Thanks! Going to the pull apart tomorrow so I can take this off of Grand Cherokee and put it on my Jeep TJ. Now I know exactly what tools to take...
New advertisement for ANTI-SIEZE! LOL Great job. Bet she drives great now.
Great video one best one's I've seen on UA-cam
Carl gone fishing05 Jackson Thanks
Very well done. You did an amazing job explaining and demonstrating this entire process. Thank you for all the hard work
Very good video and instructions
This is great - I have a question though... do you know if on your 97, is it the same exact layout as on the 97-01 XJ Cherokee? I'm about to embark on a rebuild myself...
officialmikethompson yes they have the same inverted "Y" steering linkage setup as the unless it has been modified by a previous owner.
@@barricadegarage5361 Perfect, thank you! This is one of the best, clearest, and to-the-point videos on the subject I've come across.
Exactly the info I was looking for. Great video and very informative. I appreciate it! Loved the thumbs up shot!
All your videos are very well done..super informative..no bulshit just work
Thank you
Good job very clean and informative video
Next time you need to do your front end look up Doetsch Offroad in Arizona. They have the really nice aluminum steering linkage. I have it on my JK.
This dude is good! Wish I knew why my pitman arm snapped in half! Shouldve watched his video first. Got more kits to buy! Nice job bruh!
Awesome video. Thank you for bringing this to everyone who needs it.
Hey man. Thanks for the great video. Just wanted to know how good is the Detroit Axle kit holding up? Thank you so very much!
Its holding up great. I have that same kit on both my 96 & 97 Jeep ZJs and After 2 years have not had any problems
@@barricadegarage5361 thanks 4 the reply brother, I'll keep watching your vids!
I love me a zj Have two of them will always have one from here on out
The thumbs up and the nod got you another subscriber ! Lol great job on the video very good description of what you’re doing !
Thank you
These are some some quality mf videos lol shout out man, your videos are awesome. Straight to the point, I can hear you loud and clear, and the video is never shaky. You def have a supporter from me
And the fact you give every piece of info someone would need. I.e. what a part does, what it connects to and where. Plus torque specs on each bolt? Bruhhh killing it lol
Very cool 👍🏼👍🏼👍🏼 thanks for sharing the knowledge ..... & like everyone else has already posted, great presentation .
great video - this REALLY helped me keep my tie rod ends straight and stay organized redoing the front end. thanks!
The only mechanic I watch. But off topic my power steering has a electric solenoid on top of the high pressure side of the pump it's self. I can't find it anywhere, not even in the book. Dealer wants $200 for a new one, and I can't find a pick a part with the same thing. Eliminating it (solenoid) shouldn't make a problem should it? Thanks
As always great video
So now how tall do you need the lift for you to add the steering stabilizer?
Juan Duarte you dont need a lift for the steering stabilizer. this Jeep was at factory ride height
You make really great videos! I might be biased because I have a 1994 Jeep grand Cherokee, but your videos really are good.
Great video and details are spot on. Much props on the sizes being listed, which Milwaukee gun is that? Any links on the parts?
still best video out there came back to do my stabilizer bar after already doing tie rods and sleeve n drag ling n ties to that wound up saving money so i bought a new stabilizer bar just cause and thnx again for the clear video and ibs per on tightening
Nice, quick video man! Thanks for this!
Where did you get new parts
Demo 7241 this came in a 15pc front end kit that I ordered from detroit axle...
my other ZJ has a 3.5 lift and I used this 15pc kit I ordered online from ebay
www.ebay.com/itm/15PCS-Suspension-Ball-Joint-Control-Arm-Kit-For-1996-1998-Jeep-Grand-Cherokee-/272826015395
www.ebay.com/itm/1996-1997-1998-Jeep-Grand-Cherokee-Front-Control-Arm-TieRod-Track-Bar-Kit-V8-4WD-/161780335805
Good idea just change everything this way you don’t have to pay for more than one realignment Thanks from NY 👍🏻
best one I've seen on this..great job my man!