Thank you for watching, thank you for your support! 🙏 ► Tutorial and Plans available: allflavorworkshop.com/adjustable-router-dado-jig/ ► ALL Woodworking Plans: allflavorworkshop.com/woodworking-plans/ 🛠 All My Tools & Gear: allflavorworkshop.com/tools-and-resources/ Check out the description. Subscribe not to miss anything!👍 THANKS!
Thanks for this video. There aren't many other videos showing how to make a router guide with side adjustment. There's just one other good one where the woman uses shop-bought T-tracks, which can cost some £40. I chose to make your version. Just finished making it today, can't wait to use it on my next project!
Brilliant, this is the second video of yours I've watched and they have both been excellent projects and informative. Thank you for posting, another subscriber gained.
Hello , thanks for Your videos , I have a simple question from a very newbie ... At 07:10 You use the 6mm bit to refine the base , it means that with this jig , always You will use the 6mm router bit ??? Thanks for You answer .
Hello Andre, yes the aluminum bars. They stop the router and set the width between the router bit and the edge of the router stand. Anyway, keep in mind it works for one specific router bit. I am using a 6mm router bit, though if I used a say 12mm router bit, the bit would cut in the material.
Great video, can I ask about the size of the angle aluminium you used please? base width and height? Also , anything else I should look for if buying this? Thanks
Any chance of getting dementions of these builds including cut sizes.Knowing that your build size may not be the size that I may want but it gives an idea of what your idea maybe. In one of your builds you offered a PDF of the build,is that something you could offer in your future projects?Thank you,Barry.
Excellent craftsmanship fella. Question: seeing as you run your router along that straight edge all the time does that mean you always have to use the same size router bit otherwise the centre would be off?
Great video, thanks a lot. But, if I dont have any of the mentioned jigs above, which one do I start with abd in what order do I do the rest? I have a plunged router, Bosch POF1400 and a whole kit och Ryobi power tools incl. a circular saw. I do not have a tablesaw! =( Thanks...
Hi Ahmed, thank you. The longer one does not have a stop block. It is unnecessarily long. With this shorter one, you can better set boundaries and if you switch/change the blocks you can snap the object you want to cut and make a precise rectangle cut.
Great video. Looks like it will work quite well. Just 1 tiny suggestion....when making this vid it would have been helpful if the color of the background (n this case a cutting board) were a different color than your project. At times it was hard 2 distinguish which was which. :)
Thank you for watching, thank you for your support! 🙏
► Tutorial and Plans available: allflavorworkshop.com/adjustable-router-dado-jig/
► ALL Woodworking Plans: allflavorworkshop.com/woodworking-plans/
🛠 All My Tools & Gear: allflavorworkshop.com/tools-and-resources/
Check out the description. Subscribe not to miss anything!👍 THANKS!
Отличные идеи и великолепное изложение и в видео и в тексте. Большое спасибо! Решил повторить конструкцию.
That is a super tight fit Lukas! Well done, I am impressed!
Thanks, Boris, much appreciated, as always. 🙂 Stay safe, mate.
The best example I've seen so far.Going to build it tomorrow.
Thanks for this video. There aren't many other videos showing how to make a router guide with side adjustment. There's just one other good one where the woman uses shop-bought T-tracks, which can cost some £40. I chose to make your version. Just finished making it today, can't wait to use it on my next project!
Can't tell you how much easier you just made my life ~ Lol! Thank you for sharing!
Brilliant, this is the second video of yours I've watched and they have both been excellent projects and informative. Thank you for posting, another subscriber gained.
es el mejor enrurdor que he visto hasta ahora, usted podria poner las medidas facitaria su construccion, muchas gracias
How did you get the grooves in the cross arms that join the two halves together ?
Hello , thanks for Your videos , I have a simple question from a very newbie ... At 07:10 You use the 6mm bit to refine the base , it means that with this jig , always You will use the 6mm router bit ???
Thanks for You answer .
Hello MB, yes that is right. If I am about to use this jig I need to use it with a 6mm router bit.
Hi. Interesting jig. What prevents the router to touch the jig ? The aluminum bars ?
Hello Andre, yes the aluminum bars. They stop the router and set the width between the router bit and the edge of the router stand. Anyway, keep in mind it works for one specific router bit. I am using a 6mm router bit, though if I used a say 12mm router bit, the bit would cut in the material.
If I understand it correctly, this jig only works for a 6mm dado bit? :)
Good job and thanks for sharing your knowledge
Awesome jig. Thank you!!!
Great video, can I ask about the size of the angle aluminium you used please? base width and height? Also , anything else I should look for if buying this? Thanks
Any chance of getting dementions of these builds including cut sizes.Knowing that your build size may not be the size that I may want but it gives an idea of what your idea maybe. In one of your builds you offered a PDF of the build,is that something you could offer in your future projects?Thank you,Barry.
Do u have to use always rhe same router bit or you can change it? Great job! Thank you
Hey, nice realization of this jig!! Did you use wood glue to glue your plywood on top of the aluminum? Cheers
Excellent craftsmanship fella.
Question: seeing as you run your router along that straight edge all the time does that mean you always have to use the same size router bit otherwise the centre would be off?
Great video, thanks a lot.
But, if I dont have any of the mentioned jigs above, which one do I start with abd in what order do I do the rest? I have a plunged router, Bosch POF1400 and a whole kit och Ryobi power tools incl. a circular saw. I do not have a tablesaw! =( Thanks...
Great and accurate! What is the difference between this jig and the one (the longer) you use while you are building it?
The long one has fixed adjuster, in this video can slide so router has stop block
Hi Ahmed, thank you. The longer one does not have a stop block. It is unnecessarily long. With this shorter one, you can better set boundaries and if you switch/change the blocks you can snap the object you want to cut and make a precise rectangle cut.
@@royprawira Thats right, thanks! 👍
Complimenti, molto bravo
Vera good! Nice!
e kan ik de plan van bekomen ?
Great video. Looks like it will work quite well. Just 1 tiny suggestion....when making this vid it would have been helpful if the color of the background (n this case a cutting board) were a different color than your project. At times it was hard 2 distinguish which was which. :)
Plan hoe kan ik die ontvangen?
SÜPER
👏👏👏👏👏
Might have made more sense with some comentary!!??
👩🎓🔩♥️
🔩♥️