XTOOL S1 40W LASER ENGRAVER - THE NEW STANDARD
Вставка
- Опубліковано 4 лип 2024
- #xtool #pcbway #laserengraver -
PCBWay: www.pcbway.com/
FREE AIR ASSIST AND HONEYCOMB TILL NOV 2ND - To Purchase - bit.ly/3Fo9kHZ
40W $2,199.00 USD - 20W $1,699.00 USD
US Store: bit.ly/3Fo9kHZ
EU Store: bit.ly/46EhQyz
UK Store: bit.ly/46Otnv4
DE Store: bit.ly/46PoKkA
@xToollaser
xTool S1 is the world's first 40W enclosed diode laser cutter. With various laser modules and an expansive accessory matrix, it fulfills diverse DIY requirements, unlocking endless creative possibilities for users
The World's First 40W Enclosed Diode Laser
The first Class-1 safety certification enclosed 40W diode laser machine, it’s eye-friendly and you can run it without wearing protective goggles
Faster & Stable Speed
Stable performance at 600mm/s. Although it's not the fastest among open diode laser cutters, it delivers the best results at its speed.
Brand New Positioning Method
Twin-point Positioning, without camera but better than camera. It enables more precise engraving and supports curved surface engraving.
Dynamic-Focus Engraving
Autofocus system
Accessories
Interchangeable laser modules, Riser Base and Automatic Conveyor Feeder.
This is an Approved by IEC Class 1 laser safety certification 20/40w enclosed laser engraver!
With safety features like!
① Full-enclosed: The xTool S1 features a fully enclosed, fire-resistant shell design, ensuring no laser leakage.
② Eye-friendly: A large, high-transparency cover offers excellent dual-wavelength filtering capabilities (diode laser and 1064nm Infrared laser), freeing you from cumbersome protective glasses while letting you clearly observe every step of the processing.
③ Powerful smoke exhaust: Robust smoke extraction safeguards your health. Additionally, it comes with an extremely powerful active exhaust fan that rapidly discharges harmful gases produced during laser processing, ensuring your safety and well-being.
① 5-direction flame detection: An enhanced 5-way(four baffles and a laser module) flame sensor system offers superior flame detection.
Walter White -
www.etsy.com/listing/12523355...
Measuring Sizes -
www.etsy.com/listing/85628985...
#Lightburn Software
lightburnsoftware.com/
Disclaimer - This is an instructional video only - I assume no responsibility if you do not become a pro after watching this video. This video is for learning purposes only, you are following the steps in this video at your own risk!
/ tripodsgarage
/ tripodsgarage
/ tripodsgarage
Thanks for watching - Please Like and Subscribe!
Tags
Kywoo, Tycoon, Tycoon Max, Tycoon Slim, CR6-SE, CR6SE, 32-Bit Control Board, TMC2209 Stepper Motor Driver, 3D Printer, 3D Printing, CR-10, CR-10s, Ender 3, Ender 3Pro, Ender 5 Pro, Ender 5, creality silent board, silent board, BIRGTREETECH, SKR CR6V1.0 #tycoon #tycoonslim #tycoonmax, ATOMSTACK A5, #ATOMSTACK #ortur #xtool #laserbox #thangs #40watt 40 Watt laser #thangs.com #xtool #xtools1 - Наука та технологія
The probe looks great, will make it quick for flat material, and lets you do variable shapes like the bowl. Good review and thanks for pointing out the safety features
Great review, I agree with you on the need for the twin point being active for arranging designs. They seem to have some quick software engineers so I bet we will see that soon. As well as I hope the ability to twin point circles and add multiple boxes as the same time.
I totally agree with your comments! It seems like they could add that functionality pretty easily. I would also love to see them add an optional camera module.
Thanks bud! I just watched yours, great job! I liked and left a comment! It was very frustrating that there is a two point box, yet you cannot interface with it to center your project. Like you mentioned, they are very quick with updating their software, so hopefully it will be implemented. I would be great to expand the 2 point like you mentioned for multiple boxes. If you make a jig, lining everything up will be a lot easier! Thanks for watching and commenting!
Excellent video! Thank you.
Glad you enjoyed it!
Thanks man, I really enjoyed your video and the way you explained everything. Thanks for not editing out the minor mistake with the bowl. That seems like something I would have done. I just ordered it about an hour ago. I ended up going with the all in one version so I wouldn't have to order all the separate stuff like I did with the 10w d1 pro.
Many thanks for watching! It was a lot to unpack with this one, a lot to explain in around 20min without trying to go too fast! I make many mistakes, and the bowl was about $15. Live and learn from mistakes 😉. I wanted to try and hide my enthusiasm for this machine, but it was really hard. This is a laser I have been waiting for someone to produce. There is a learning curve for the workflow, but once you get it, it is so nice! I hope you enjoy the machine and glad you got the air assist and honeycomb for free! Thanks for watching and commenting 👍
OK, that's a first that I've seen w/ position feedback when you manually move the laser head. 👍
Yeah! I really like that idea! I bet it will be copied by others soon enough!
I have just purchased the 40watt version, but looking at some of the reviews the engraving doesn’t seem that sharp. I wonder if 20 watt would be the ideal rating for sharpness or is it just because the reviewers are getting used to the power settings? Very professional review, thanks for taking the time to produce it.
Have to say your production value just went to another level 👍. Yours has to be one of the best reviews out there! Most just plotted themselves in front of a camera and rambled for 10+ minutes! Or just basically vlogged the video, pointing their cameras to their computer screens. You actually showed people how to use the new features, with results. I can tell you took your time in comparison to others. Well done! I love the Breaking Bad cutting board, and the pulled pork cedar plank 😂😂!
Many thanks! I didn't want to comment until I watched some of the other reviews. I see your point, many felt rushed, and didn't provide much information, while others did! I do not know if that is their style or not. I did get the laser within a time period to make a video showing as much detail of the machine, without hopefully losing people during the process. If people reviewed the 40w laser by xTool, or any other brand, then they should have a good idea of the engraving and cutting parameters needed to get them going. Xtool has a material recommendation sheet on their website for the 40w. The only thing that took me a little while to figure out was the two positioning, and dynamic laser focusing, because the documentation wasn't all that clear. Otherwise the review wasn't that difficult. I mean besides all the nice safety features, the other highlights is what the probe can do. If that is how they do their videos, then that is how they do them. Yeah, I wanted to do some fun engravings for this one. I found the Breaking Bad file on Etsy, and said I have to use it! Thanks for watching and commenting.
Think this will be a great laser for folks wanting to get into a safe quality unit. Thanks for a awesome video. I do hope they consider a more powerful head as future option too... or maybe a fiber head to do metals!
Was happy to see XTool finally made a Class 1 enclosure, along with other safety features. Wondering how powerful they will go. I would also like to see something more powerful than a 2w 1064nm. Thanks for watching and commenting bud 👍
that's a nice bowl, wonder what the wood is?
Mine gets here later this week. So excited
That is amazing! What will be your first project?
I bought a 36 pack of slate coaster blanks and a $10 pack of cork blanks. Will probably start with plywood first tho
@@SamPosten That is perfect! A great way to get started!
I’m even more excited to get started with this than I was with 3d printing. I’ve wanted a laser and cnc for years but could never get over the safety issues. This one ez venting to kitchen window should make that cake. Now I just need a hobbyist CNC to match :)
Mine is scheduled to arrive 10/26. I’ve had a Glowforge Plus for two years.
That is awesome! What are some of the projects you are planning to make?
I just make whatever comes up. I’m a hobbyist, not necessarily a business. I just like to make stuff and give it to friends or family
Can this laser etch a steel sheet? like a steel poster? Thanks!
Bear is great. nice video Mr. Tripod! thank you
UGHHH why did they not add a camera to the top for placement... thats what the world needs is an enclosed normal priced laser with a camera on the top for alignment.
Newbie here, my S1 comes in 2 days!!! My question is about acrylics and the diode laser. If painting on glass works for etching, will that not work for clear or transparent acrylics? If painting DOES work on clear and transparent acrylics, would the S1 also cut those acrylics? BTW, great review!
I wouldn't recommend a 455nm\diode laser for clear acrylic. I haven't had much success with using an interface layer on clear acrylics. If you want to engrave and cut clear acrylic, CO2 laser is the best choice. Hope that answers your question? Thanks for the compliment!
It is pretty though :P
It reminds me of the Original Xbox colours :D which I loved !!!
Can you do a 40 oz tumblr top to bottom and 360
Can it cut clear acrylics or still need c02 laser for that?
Unfortunately it cannot cut clear acrylics. For clear acrylics you will still need a CO2.
Would be nice if they had a marker or vinyl cutter module.
The green top scratches very easily. You have to buy add-ons to do a lot of things like the d1 pro. I'll pass on this one. Good review otherwise.