😂😂 that was funny when you said, "if your wife watches this, you're gonna have a project" I totally want one but I'm the carpenter 😂 You did pretty good!
Awesome setup! Bet if you just slipped a slim board inside a couple of the dispenser areas those smaller cans would fit just fine, then if you want the space bigger you can just pull out that slim board.
Just randomly found your channel. I subscribed to your channel and also shared your channel with others. Hope it helps and you get a lot more folks come over. God bless y’all and looking forward to going back and seeing all y’all’s other videos and future ones to come.
On your full length racks, how many normal (15 oz veggies) cans per row will it hold? I agree though, I think half racks with the kicker shelf would be better. Maybe half whole racks on one side and the other side half racks. Nice job. Thanks for sharing. It inspired me.
EH Nebraska yes, that’s basically what I went for. I used a piece of 1/4 round but I should have used a bigger piece. Just a triangle the right size would work too.
Seems like a bit of plexiglass on the inside of the face of each bay might help with the flow. All you would have to is slip them in each bay. Nice work. Thanks for sharing.
Livin The Dream I’m not sure about jars. Maybe end to end on a slide type shelf rather than straight up and down. You’d might have to scootch them down one at a time. It would be tricky.
Livin The Dream right!? We do some canning too but we usually eat most of it within a year so not as much an issue on rotation. If we increase our canning we may have to look into something for that.
you might could add a furring strip inside those that are smaller cans. Run it along the side on the front to hold them toward the back so won't get to the front. One on each side. 1/2 inch square dowel might work also.
That’s a good idea. Someone suggested to use plexiglass to cover the front but I’d be worried it would not be user friendly if they got stuck. I like your idea.
RHcamel negative. We haven’t had any problems with width OTHER than some of the soup cans are too small and they sit crooked. Easily fixed with a yard stick used as a shim.
I also need to make one foe the better half too.Get yourself a sheet of paneling cut strips and glue them in to take up the extra room. Nice job.
Was looking for a do it yourself no nonsense system. I think this is it...Thanks
we'll be sort of copying this. good work. thanks for the video!
Pretty cool system!
All right you made me laugh that's why I'm watching your video
I like to get a food dispenser built in my home thanks for making me laugh
That was awesome! Thanks!
Wife just watched this video with me. Gave it a big 👍! This really is an awesome idea. It makes first in ,first out so easy and saves so much space.
Jeff Brown I’m glad she likes it. It really is helpful.
Love seeing the bigger FIFO system. The more the better!!
Ugh! Now you've guilted me into building one!! Nice work!
Set Apart Homestead lol. It’s pretty easy. Just a little wood and time.
Oh. Brilliant. I just luv this setup. Thank you. 👍
I love this set-up. Thanks for sharing.
Granny Moreno I’m glad you like it. 😄
😂😂 that was funny when you said, "if your wife watches this, you're gonna have a project" I totally want one but I'm the carpenter 😂 You did pretty good!
Awesome setup! Bet if you just slipped a slim board inside a couple of the dispenser areas those smaller cans would fit just fine, then if you want the space bigger you can just pull out that slim board.
Thanks a lot Hobie... off to Lowes I go. My wife LOVES this setup.
Scott Brooks ha ha ha. It’s not too complicated.
This is outstanding. Thanks for sharing!
SonOfLiberty1984 thank you!
That is awesome hobie, nice work.
Jeff Brown thank you!
Just randomly found your channel. I subscribed to your channel and also shared your channel with others. Hope it helps and you get a lot more folks come over. God bless y’all and looking forward to going back and seeing all y’all’s other videos and future ones to come.
Lavette McFeeters welcome aboard and thank you! We do some random stuff. Lol
My hubby brought home a rack that was can size. It was the guts from something... coated wire, screwed to wall holds 9 x 9 fifo.
Helen Kessler awesome! I’d like to see that.
I’m trying
Copy and paste isn’t doing it’s thing. And I gave up fb. Mmm
Helen Kessler that’s ok. It sounds easy.
Now where can I put this??? One thing I hate about my house , no storage space. Wife will have to have one.
Jeff Brown it’s handy! Lol
Love it you know that if you cut a strip of 3/16” door skin on each side of the Dalit it will be perfect for soup cans.
Reckon you could make a couple shims out of some veneer or something for your soup can columns?
Country Spark yep. I have some Teflon strips I’m going to slide in there to shim it up. Once I get around to it. Lol
On your full length racks, how many normal (15 oz veggies) cans per row will it hold?
I agree though, I think half racks with the kicker shelf would be better. Maybe half whole racks on one side and the other side half racks.
Nice job. Thanks for sharing. It inspired me.
Wife says about 20 each.
I wish someone could build me one of these.
Do you think adding a triangular piece in the bottom would help to kick the cans out when you pull the bottom one?
EH Nebraska yes, that’s basically what I went for. I used a piece of 1/4 round but I should have used a bigger piece. Just a triangle the right size would work too.
Seems like a bit of plexiglass on the inside of the face of each bay might help with the flow. All you would have to is slip them in each bay. Nice work. Thanks for sharing.
I had not considered that. That’s a good idea.
Constant temperature for root cellar?
What is this music? I keep hearing it places.
Nice system
Corsair Trainers thank you!
Love, love, love!
PandyJ1 thank you!
Awesome!
Werewolf Preparedness thank you brother!
Awesome can rack!
* somebody needs to stand closer to the razor in the morning... :D
flatlinesup I will work on my grooming habits just for you brother. 😁
@@hobie909 jus' joshin', you can be all big and fuzzy if you wanna... :D
flatlinesup I know brother. I’m not worried. You will love me no matter what......or else! 😝
@@hobie909 ... or else your mean 'ol wife will git me!
flatlinesup yup
Nice!
OzarksTactical Homesteading thank you sir!
Thats awesome man. Think there's a way to do it with mason jars too? Maybe end on end so they dont break as easy?
Livin The Dream I’m not sure about jars. Maybe end to end on a slide type shelf rather than straight up and down. You’d might have to scootch them down one at a time. It would be tricky.
@@hobie909 yea thats what i figured. But then its not special and cool like the cans automatically cycling down as you use one. Lol
Livin The Dream right!? We do some canning too but we usually eat most of it within a year so not as much an issue on rotation. If we increase our canning we may have to look into something for that.
@@hobie909 yea. Its be pretty sweet. Keep everything off the floor. Maybe on cabinet and pantry doors. Save your floor space a little bit.
you might could add a furring strip inside those that are smaller cans. Run it along the side on the front to hold them toward the back so won't get to the front. One on each side. 1/2 inch square dowel might work also.
That’s a good idea. Someone suggested to use plexiglass to cover the front but I’d be worried it would not be user friendly if they got stuck. I like your idea.
@@hobie909 Thanks! It should but if they are too thick you may have to trim off some on a table saw. Hope they work out.
Just pop in a spacer bit of wood on both side for the soup cans
My ?? is what about the soup and some veg cans going to the pull top lids is that a problem ? Thank You
RHcamel negative. We haven’t had any problems with width OTHER than some of the soup cans are too small and they sit crooked. Easily fixed with a yard stick used as a shim.
what kind of dog is that it looks like a young brindle mastiff
He was a pit. He was a great companion for us.
Cut some cardboard / glue / put on both sides of soup cans then it will take up the slack....easy fix.
Dude I would be Embarrassed to show that the whole thing is a failure yank it out and start over.🙄
Tips? Pointers? Got a video of yours?
Please focus on the subject.
Stupid intro, just get to the point on build.
Kenjo Shiki 🤪🤪
Awesome!
Madkelt thank you!