Subaru check engine light on? DTC P0031. Watch this video before spending your money on diagnostics.

Поділитися
Вставка
  • Опубліковано 8 тра 2018
  • Subaru Check engine light on? DTC P0031 Watch this video before spending your money on diagnostics.
    Disclaimer:
    Warnings And Caution!!!!
    If you follow the procedures, techniques and methods shown in this video, be aware that you follow them at your own risk.
    Under no circumstances will the author(s) and/or publisher(s) of / melniksmotors (melniks automotive) be held liable for any injuries or damages, direct or consequential, incurred by any person who attempts to follow the examples shown herein.
    Disclaimer:
    Warnings And Caution!!!!
    If you follow the procedures, techniques and methods shown in this video, be aware that you follow them at your own risk.
    Under no circumstances will the author(s) and/or publisher(s) of / melniksmotors (melniks automotive) be held liable for any injuries or damages, direct or consequential, incurred by any person who attempts to follow the examples shown herein.
  • Авто та транспорт

КОМЕНТАРІ • 60

  • @nickshavermatson
    @nickshavermatson 5 років тому +10

    This fixed my 2015 Subaru Crosstrek. Thanks very much for the video! The dealer tried to get $3000 from my wife for three sensors, turned out this single fuse fixed the whole problem. This was the Little Rock AR dealer that we bought the car from, and it had under 50k miles at the time, which was under the warranty miles.

  • @notredave77
    @notredave77 3 роки тому +3

    Swapped out the fuse and the lights are no longer illuminated. Thanks for saving me time and money! You Rock!!!

  • @BwahBwah
    @BwahBwah 3 роки тому +4

    Mate!! I had P0031 and P0037. O2 and fuel mix sensor. Subaru dealership here said I needed two new sensors costing around $1500. They said they checked fuses too. 2 years later, still check.engine light on,.found.your video. Located that black.fuse box and low and behold!! The 3rd fuse was fucking missing!! Replaced it, cleared faults with my cheap scanner tool and POW! Faults gone! Those fuckers were going to rip me off. I bet they knew that the fuse was missing too. I've since given them a very scathing review!

    • @SoulLead87
      @SoulLead87 2 роки тому

      What kind of scanning tool or brand so I can buy that?

  • @Silentb00
    @Silentb00 5 років тому +4

    George you put out great videos & info. Haters always going to criticize. You have lots of great respect from your subscribers.

    • @funutation
      @funutation 3 роки тому

      Haters are the Subaru repair shops 😂

  • @user-kv5uk8ev7c
    @user-kv5uk8ev7c 6 років тому +1

    Thank you very much
    its new solution

  • @seshachary5580
    @seshachary5580 4 роки тому

    Thank you VERY educative regards

  • @sergboychenko94
    @sergboychenko94 5 років тому

    Thank you so much it worked

  • @helenedelnegro
    @helenedelnegro Рік тому +1

    Thank you ... I needed this video ... I have a love / hate relationship with my Subie

  • @robertcortezano9328
    @robertcortezano9328 5 років тому +3

    Thank you broskii!😆

  • @maikelgeres145
    @maikelgeres145 4 роки тому +3

    Thank you for the video. These lights were driving me crazy. Will try this trick.

  • @BRAYEN169
    @BRAYEN169 3 роки тому

    Thank you so much!!!

  • @larrygarrido9000
    @larrygarrido9000 4 роки тому

    thankyou worked out!

  • @kevinmendez7846
    @kevinmendez7846 4 роки тому +2

    Saved my life. Was going to buy a new Sensor but went to check the fuse on my 2016 STI and was the fuse #9 from buttom to top that was blown. Replaced it, clear the code and problem solved. Thanks for the info.

    • @sammytarantino7106
      @sammytarantino7106 2 роки тому +1

      Where was the fuse?I got the same 2016 Sti with same code

    • @lydias9265
      @lydias9265 Рік тому

      @@sammytarantino7106me too! Which fuse ??

  • @scottfirman
    @scottfirman 3 роки тому +7

    What caused the fuse to blow? At that point, you need to check your wiring and check the 02 sensor. They do not just blow for no reason. That pre heater is exactly what it says. If its blowing fuses again, you have a short somewhere. The sensor its self may be bad.I have found the wires chewed right off by chipmunks. I have seen them ripped off by ice or snow under the vehicle that have pulled the wiring down. had someone simply plugged the cheap wire holder back in.

  • @nickbruce8757
    @nickbruce8757 6 років тому +1

    Great video. hope to see your review video for ATOTO.

  • @cabrioracer
    @cabrioracer 2 роки тому

    Hero!

  • @ghostrecon1ak
    @ghostrecon1ak 5 років тому +6

    Could this work for a 2005 wrx Sti? I’ve replaced the sensor twice and I took it to the dealership and they said all they could do is replace the sensor

  • @briansahli5428
    @briansahli5428 2 роки тому

    this fixed my issue as well.. shame on Subaru for trying to charge me 2k for swapping the sensors with a new one

  • @simonilett998
    @simonilett998 3 роки тому +1

    Hey George,
    I'm guessing the paperclip and new computer never fixed the problem on the Lexus with a P0018 code? It most likely had stretched timing chains or some other cam/crank issue, just as the code suggested right? I'm also guessing it didn't work to reprogram the keys either right?...Did you fry the new computer too, after you connected the paperclip to the wrong pins (5+13) even after you showed which pins it should connect to?😂..The OBD connector was upside down from your diagram..lol🤔😂

  • @dddddddd48
    @dddddddd48 5 років тому

    Thank you so much you just save me $140

  • @brianwilcox7251
    @brianwilcox7251 3 роки тому +4

    Whats the scan device Called for your android phone and does it wrk on a iPhone? Does the code reader wrk
    For a 2017 Subaru Outback? Great video!!!

  • @markhatfield477
    @markhatfield477 4 роки тому +1

    What's that yellow scan tool thing that brings up the codes on you droid phone???

  • @leospartan5383
    @leospartan5383 5 років тому

    Did this. Didn't work at all. Replaced a couple sensors but still hasn't gone away. Same codes pop up but I've replaced everything related to the code. This problem can be complex. Glad it worked for you though.

    • @keyfir652
      @keyfir652 4 роки тому

      Hello. Did you find out what the problem was. I have the same problem as you. Mine is a SUZUKI SWIFT 4x4 2006. Have replaced it 2 times.

    • @xMrBlack
      @xMrBlack 2 роки тому +1

      Look for a short or damage in the wiring

  • @gloriarubalcaba6176
    @gloriarubalcaba6176 5 років тому +1

    Great video! I have a 2019 Subaru crosstrek premium and what does the mpg + and - mean on the dash? Also, I wish they had kept the H and C gauge because I feel anxious not knowing how hit the engine is on my car.

  • @JoseGarcia-ux2mx
    @JoseGarcia-ux2mx 5 років тому

    thank you but i need now on 2009 subaru forester where is the fuse for the sensor

  • @Benny-dv7xm
    @Benny-dv7xm 2 роки тому +1

    2004 Subaru Forester X the scan tool won't clear some of the codes for a second depending on the conditions.

  • @SubOptimal_
    @SubOptimal_ 4 роки тому

    where would the fuse be for a 2013 WRX? cannot find it anywhere

  • @SoulLead87
    @SoulLead87 2 роки тому +1

    What kind of scanning tool or brand so I can buy?

  • @xMrBlack
    @xMrBlack 2 роки тому

    Which fuse does this for a 2002 outback?

  • @prettyt375
    @prettyt375 Місяць тому

    What's the of the scan tool you used invthis video?

  • @mattyshootss6620
    @mattyshootss6620 4 роки тому

    mines for sensor 2 is it the same?

  • @sturdyspamsl2277
    @sturdyspamsl2277 11 місяців тому

    How would this work for a 2006 sti ???

  • @christianwoodley7699
    @christianwoodley7699 4 роки тому +2

    Can someone please help.
    I have a 2006 Suburu Impreza R with a 2010 Impreza engine in it. It’s throwing the code P0031 (heated O2 sensor circuit low bank 1 sensor 1). I’ve tested the harness for power with the ignition on and gotten 12.8 V and then the resistance on the sensor with a reading of 2.2 Ohms. What else could be causing the problem? It’s driving me nuts. The engine struggled for power under 3K rpm in 1st-3rd gear. I reset everything and cleared the code to see if it did anything and now the car is running like it’s brand new, the P0031 code is back as a pending code however it’s no longer causing a CEL on the dash. What other diagnostics can I do?

    • @keyfir652
      @keyfir652 4 роки тому +1

      Hello. I have the same problem as you. Did you find the selution. I have changed the oxygen sensor two times.

  • @davebible1318
    @davebible1318 3 роки тому +3

    What if the engine light come on the traction light come on and the cruise light come on all at the same time

    • @lamper2
      @lamper2 2 роки тому

      a thousand videos address this-check tightness of your fuel cap first

  • @muhammadibrarjahanbahader3446
    @muhammadibrarjahanbahader3446 4 роки тому +1

    Bro will this work on subaru wrx 2016, after replacing the engine, i started having engine icon flashing and also started having engine idle issue, what you think is the problem, resetting the ECU will that work?

    • @jasonbalzer3875
      @jasonbalzer3875 4 роки тому

      Did you ever find a solution? Similar problem I'm having. Pulled the engine on a 2010 SOHC 2.5 and now I have P0031. Replaced the sensor.. checked fuses.. checked power to the sensor. checked resistance on the sensor.. all checks out yet there is still a code

    • @jasonbalzer3875
      @jasonbalzer3875 3 роки тому

      @@sfd50 Sold it but the new owner said the code went away as the connection wasn't plugged in all the way. I'm not sure I believe it but perhaps it wasn't!

  • @octavioalquezada2790
    @octavioalquezada2790 Рік тому

    Hi were can i buy the fuse

  • @mancon27
    @mancon27 Рік тому

    ama try with my 2018 wrx i changed the o2 sensor and this code came up

  • @zedtv5741
    @zedtv5741 Рік тому

    How can I get Code ?? Where? Thanks

  • @ayushmaamatya9433
    @ayushmaamatya9433 3 роки тому

    Hi, my Subaru Impreza 2013 also just had the check engine light on, with that the traction light is also on and the cruise control logo is flashing. What could be the problem?

    • @nickjanslots
      @nickjanslots 3 роки тому +1

      It could be your fuel Tank Cover that needs to replace ...

    • @kingseagullsinternet2874
      @kingseagullsinternet2874 3 роки тому

      Did you figured it out I got the same problem

    • @cintsy672
      @cintsy672 2 роки тому

      I also have the same problem

  • @don-cw1yz
    @don-cw1yz 5 років тому

    I have a 2006 Subaru out back that I have replaced the #1 02 sensors twice. I use a scanner and turn off the code and it stays off for one to two weeks, but eventually comes on again. Sometimes the engine light just goes off by itself. I also remember seeing another post where if you change the battery on a Subaru you need to change a fuse. I guess I will check my fuses. Anyone had a similar situation and a fix? Thanks for your post.

    • @user-pf1oc7is8d
      @user-pf1oc7is8d Рік тому

      I have 2013 subaru brz. It has only 40k mi. I have same problem as you. Some time it goes away it self and comes back it self.

    • @danielmorris5470
      @danielmorris5470 6 місяців тому

      i have this problem. did yall ever find a fix? i already replaced the o2 sensor. @@user-pf1oc7is8d

  • @fatsubie7604
    @fatsubie7604 4 роки тому

    Does anyone know where is this fuse on 05 -07 wrx sti?

  • @hydn79
    @hydn79 5 років тому

    What is the time of video where solution is?

    • @pogmothoin227
      @pogmothoin227 5 років тому +1

      It's the fuse, under the dash there's two fuse blocks, a tan one and a black one. Three fuses up from the bottom of the black fuse block is the one to check on this car and it could be blown