Perfect! No need to make things more difficult than necessary. Made one and installed it in 15 min. That included a walk to the shed and a short hike to the hives. Thanks for posting.
Just what I need. Made few splits yesterday with frame of honey and had very small entrance ( big enough for a bee to squeeze in) and went to check on them this morning and they got robbed. All honey is gone. Got entrance completely blocked off with mesh for now and on my way to building few of these entrances. Thank you.
Little Bits Honey Bees joe may. I’m new Beek and didn’t know that. Talked to my friend beek and he told me that the only way to stop robbing is to feed them syrup. I got all syrup mixed and going to start feeding tomorrow. BTW I did build similar entrances and it didn’t stop the robbers since they were so desperate to get more honey.
If you open feed syrup it need to be at least 100 ft away form your hives. If they are robbing a weak hive about the only way to same it is move it to another location and put a robbing screen on it after dark. If it has a lot of bees you might stop it with a robbing screen.
I found temporary solution. The screens didn’t help but I found a video where a beek simply used empty marker shell and stick it in the entrance and rest closed with mesh. The rober finds its way in but can’t get out so it stays with this colony. So far after I installed those tubes I’ve seen very little activity. Thank you for your response.
Thank you Joe for taking the time to help others !!! If I am using a landing board do you have any tricks to remove the dead bee's that may pile up at the entrance without having to remove the hardware cloth?
I tried this and I waited until the night time to put it on even and the bees would leave no problem but then they couldn't get back in. It's so disheartening to come back in the afternoon and there's like a hundred bees with pollen on their legs but they can't get in. Looks like I'm gonna have to make a proper screen. The only thing I think I did wrong is that I might have made mine too tall. It's about 6 inches tall
Great idea! Thank you! Do you find your #8 local or order? I would like a good place to get it. Ordered a roll from local store and it came in all stretched and misshaped. I refused it. Thanks Joe for all your gifts of knowledge!
You will be hard pressed to find pristine #8 hardware cloth because the small rolls are made from larger rolls than are rolled by a machine which stretch and deform the screen somewhat Most rolls are wide enough that you can cut out the small imperfection and not even notice the difference because your projects won't require using the full width or length.
Recently got a 36" x 50' roll from Amazon. $66. It arrive well protected an packed. The roll looked in good condition. I did this because I could not find 1/8 th at the big boxes . ace. Tractor supply etc. This cloth was made in south Carolina and sold by Amazon from California. I live in floridah.
I was thinking about the times I've had finding my robbing screen and my staple gun and installing it in the middle of a full-on robbing scenario, I am always concerned about losing the foragers who didn't have the benefit of learning the new entrance location. I wonder if, when the flow is over and I begin to feed, that maybe I should put the screens on before robing begins and simply leave them on till the beginning of winter. What do you think?
I have not used robbing screens for a long time I got rid of Italian bees the robbing went away. But it won't hurt any thing as long as they have good ventilation.
Thank you! As a new beekeeper...I knew there had to be a fast easy way!
Thank you - you probably saved me a good hour's worth of work trying to frame and build a bunch of robbing screens for my nucs
Another good info video, Joe, especially reminding everyone to install it in the evenings.
Thanks for sharing, Joe, very helpful!
Thanks ! The simplest solutions are often the best.
Perfect! No need to make things more difficult than necessary. Made one and installed it in 15 min. That included a walk to the shed and a short hike to the hives. Thanks for posting.
Joe you are a very practical man, I like the idea, thanks for sharing!
GREAT VIDEO! THANKS SOO MUCH! 😁👍👏👏👏❤️
I just made one, and put it on. Thanks Joe !!
Just what I need. Made few splits yesterday with frame of honey and had very small entrance ( big enough for a bee to squeeze in) and went to check on them this morning and they got robbed. All honey is gone. Got entrance completely blocked off with mesh for now and on my way to building few of these entrances. Thank you.
its hard to hold the bees with just honey this late in the season.
Little Bits Honey Bees joe may. I’m new Beek and didn’t know that. Talked to my friend beek and he told me that the only way to stop robbing is to feed them syrup. I got all syrup mixed and going to start feeding tomorrow. BTW I did build similar entrances and it didn’t stop the robbers since they were so desperate to get more honey.
Little Bits Honey Bees joe may. I’m in Florida so we should get another flow in few months
If you open feed syrup it need to be at least 100 ft away form your hives. If they are robbing a weak hive about the only way to same it is move it to another location and put a robbing screen on it after dark. If it has a lot of bees you might stop it with a robbing screen.
I found temporary solution. The screens didn’t help but I found a video where a beek simply used empty marker shell and stick it in the entrance and rest closed with mesh. The rober finds its way in but can’t get out so it stays with this colony. So far after I installed those tubes I’ve seen very little activity. Thank you for your response.
Those are a great idea, now the thieves won't be able to get the flat screen TV out and around that tight turn .
Great job Joe! How can use non-3D printing beekeeper purchase those from you?
you can purchase them here www.revolutionaryhives.com/shop
Thank you Joe for taking the time to help others !!!
If I am using a landing board do you have any tricks to remove the dead bee's that may pile up at the entrance without having to remove the hardware cloth?
Sorry I do not
That would only take robbers a very short time to figure that out and enter the hive.
I tried this and I waited until the night time to put it on even and the bees would leave no problem but then they couldn't get back in. It's so disheartening to come back in the afternoon and there's like a hundred bees with pollen on their legs but they can't get in. Looks like I'm gonna have to make a proper screen. The only thing I think I did wrong is that I might have made mine too tall. It's about 6 inches tall
Great idea! Thank you! Do you find your #8 local or order? I would like a good place to get it. Ordered a roll from local store and it came in all stretched and misshaped. I refused it. Thanks Joe for all your gifts of knowledge!
You will be hard pressed to find pristine #8 hardware cloth because the small rolls are made from larger rolls than are rolled by a machine which stretch and deform the screen somewhat Most rolls are wide enough that you can cut out the small imperfection and not even notice the difference because your projects won't require using the full width or length.
I get it local.
Recently got a 36" x 50' roll from Amazon. $66.
It arrive well protected an packed. The roll looked in good condition.
I did this because I could not find 1/8 th at the big boxes . ace. Tractor supply etc.
This cloth was made in south Carolina and sold by Amazon from California. I live in floridah.
That's where i get mine and it has imperfections also.
Thank you all.
I was thinking about the times I've had finding my robbing screen and my staple gun and installing it in the middle of a full-on robbing scenario, I am always concerned about losing the foragers who didn't have the benefit of learning the new entrance location. I wonder if, when the flow is over and I begin to feed, that maybe I should put the screens on before robing begins and simply leave them on till the beginning of winter. What do you think?
I have not used robbing screens for a long time I got rid of Italian bees the robbing went away. But it won't hurt any thing as long as they have good ventilation.
if you used smaller wire would it help keep out SHB ?
it would defiantly help
do you make those plastic ones? I love them..where can I find some
www.revolutionaryhives.com/shop/fulton-cycle
will newly mated queen be able to get back in through the hardware mesh screen shown?
If its on there before she go out to mate she will get back in.
what is that material called the robbing screen like the actual material
1/8 inch hardware cloth
Do you share the .STL file? I'd like to print your robbing screens.
I sold the rights to it sorry.