Horn Button Install for Nissan Hardbody D21 with Aftermarket Steering Wheel | Flake Garage
Вставка
- Опубліковано 17 гру 2021
- Today we are fixing the issue of having no horn after going with an aftermarket steering wheel and quick release.
Horn button: amzn.to/32fLX3i (Affiliate)
→ Support the channel here: www.flakegarage.com
→ Follow us on Instagram: / flakegarage
→ As an Amazon Associate I earn from qualifying purchases.
→ Check my Amazon page: www.amazon.com/shop/flakegarage
Disclaimer:
Due to factors beyond the control of Flake Garage, I cannot guarantee against improper use or unauthorized modifications of this information. Flake Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Flake Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Flake Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Flake Garage.
#nissan #hardbody #hornbutton #flakegarage #horn #d21 #nissanhardbody #nissand21 #hardbodyd21 #horninstall #aftermarkethorn #quickreleasehornbutton - Авто та транспорт
Hey mate, To make the light turn on with headlights find the wire that illuminates the switch then you can ethier tap into the fuse for your dash lights or you can find the pos and neg wires for your dash lights and tap into it that way keep the positive and negative how you have it so it works with lights on/off hope it makes sense
Yes, one of the wires we tied together for the positive will just need to tap into the light wire. We just haven’t separated or figured out which one to tap into. We left it like that for the meantime but we do plan to fix it
Thank you for the informative vid. My clockspring went bad. Until I can install a new one I installed a 10amp fuse from +, a 4 pin relay, aux horn and new horn switch. I will be installing a 5 pin illuminated horn button switch. I returned the 16mm button from Amazon and ordered a 19mm one which fits directly in the hole for the optional fog light switch on my Saturn Ion.
Please note that the horn button link you posted is for a 16mm opening not a 19mm opening.
Mann your videos are extremely helpful with my 91 d21 . I’m putting a bumper on mine now in the front . I’m getting there
right on man, good luck with your truck
Super clean install ✨
Thanks bro!
Nice teacher homie I like that
what kin of resistor did you use? thanks for the video buddy
Wire up a relay where the ground triggers the relay for the horn and you can use the button on your aftermarket steering wheel
Is this for the airbag version of the truck or the non air bag? The problem with the air bag version is there no metal that connects the horn to the hub. You would need to fab something that touches without getting tangled on turns
You guys should do a how to kill switch on the d21
We do have plans for one but just haven't gotten around to doing it yet
I done the exact same thing using the exact material in the exact same place😁.. I need to get me one of them Quick Connect steering wheels much better look than the original🏆
It comes in pretty handy specially when you are doing any wiring inside. Take it off and out of the way
@@FlakeGarage I'm somewhat new to the channel. Do you have a video from when you installed it?
@@bassanonymous4923 here is the link to the steering wheel on the D21 ua-cam.com/video/KQrXhxkhYt4/v-deo.html
@@FlakeGarage I appreciate that.. going to check it out soon as I get off work this afternoon because I'm definitely going to do it I hate the way the original steering wheel looks
Nice but could toggle switch in there to turn off power to button until you need it.
Yeah that’s another way you could do it too. This install definitely needs a bit of redesign and improving
I used a spring from a pen to extend the power connection behind the hub. My horn with the nrg hub and aftermarket wheel works! Lmk if that makes sense.
Did you have a factory airbag?
@@FlakeGarage I thought it did since it was all oem set up but i guess it doesnt. Mine is a 1990 and after looking at your install video again, i can confirm the area behind the nrg hub is different than mine. Sorry. Thought i could help since you all have helped me so much with my build.
@@SoVividTV No worries, yeah that's why we said that this is particular to the trucks that came with airbags on them. The earlier models had no airbags so it's a bit easier to make it work. Glad you got yours working tho!
Did your airbag light stay on? Keep the Nissan content coming
It did not because of the resistor we put in. We mention it in the video around 5:40
@@FlakeGarage could you send me a link to what one you used thanks for the response
How many ohms was that resistor for the airbag light?
3 ohms
Brother I did same, but after making wire ground it use to drain all battery till night what should I do now? Should I connect that ground wire to battey negative terminal?
The light staying is most likely what’s draining it so it might be better to wire it to where the light only comes on when you press it
@@FlakeGarage so should I replace the switch to the bell switch or should I remove the wire of that switch where i had given the earthing..
@@dhruvbajpai6755 you can try finding a different ground to see if it does the same thing. If it does, then the power wire might need to be connected somewhere else. Is you light staying on the whole time?
@@FlakeGarage Brother there is no light in my switch. And I had given the power from the clock spring of my car and the other one to the Earthing and i had added normal on off switch.. Already my battery got drained 3-4 times so i had removed all the wiring and now its not draining.. Please give some suggestions..
@@dhruvbajpai6755 idk what switch you used and if you didn't do the wiring like we showed then I'm not sure where you are plugging into
My little sister wish she had your nails
💅 lol