i think i covered the important stuff let me know if this helps thanks for watching plz hit that like button to help others find this video and subscribe :)
Great video and highly informative, I have a 2017 chally swap to Chrysler 300, I need info how to rewire the pins towards the taillights, currently only have power to DRL. 🙏
For everyone that doesn’t know how to solder, solder seal connectors are a GOD send. Trust me. Been using them for a few years now at my dealerships for non warranty repairs because I hate butt connectors.
Is this the same setup for doing OEM xenon headlights for a Chrysler 300S 2022 I got the pigtails just need to match them up with my wires on the car. Also I’m going from halogens to the xenon
Kahl I think if you push the directional handle forward it locks on the high beams....so to pull it towards you is the flash to pass they say or temporary on but pushing that handle forward will lock the high beams on ….just trying to help my friend
Ummm if the headlight switch is in the off position while the car is running and you have 12v at the wire you deemed the parking light... isn't that one the drl?
Gotta ? So I hooked all the wires up as saw and my high beam isn’t working but everything else is I connect to the white and green wire as it shown and it still isn’t working for sum reason please hmu willin to pay for a lil help right on
hopefully whipple is sending you out a new supercharger you got rotor lock like a bearing let go or you sucked something into it from the road seen one one time it somehow sucked a trim screw into the supercharger and got lodged between the rotors....when ever I work on them I have various caps for the throttle bodies and I keep them covered at all times and constantly check before putting the intake tube and filter on and never run it without the filter on the throttle body...its like a huge vacume cleaner
i think i covered the important stuff let me know if this helps thanks for watching plz hit that like button to help others find this video and subscribe :)
can you do Chrysler 3rd brake light
Dope video !! definitely love these long form video very informative!
Agreed Thanks Khal!!!
Milwaukee soldering iron is on sale at Home Depot for $79, (Tool-Only)...just a heads up
Keep up the grind, can’t wait to see the next 300 update
Bro for the high beam all you have to do push the lever forward towards the dash and the high beam will stay on. This was a great tutorial.
Make one on the door harness from challenger swap to charger or Chrysler
Excellent tutorial, Khal, lots of great info in this video! Thanks man!
Great video and highly informative, I have a 2017 chally swap to Chrysler 300, I need info how to rewire the pins towards the taillights, currently only have power to DRL. 🙏
Do those headlights take standard 9005/9006 led bulbs?
For everyone that doesn’t know how to solder, solder seal connectors are a GOD send. Trust me. Been using them for a few years now at my dealerships for non warranty repairs because I hate butt connectors.
Awesome> I love helpful videos like this.
Very informative video .👍
You should be able to push high beam toggle forward to keep it on.
Can you do a video on wiring the challenger body harness to work on the 300 rear doors, door lights, and windows ??
do a video on the taillights please bro 🙏🏾 appreciate the free gameee
Great video and good info.
Can you do a vid on how to wire fog lights ??
Is this the same setup for doing OEM xenon headlights for a Chrysler 300S 2022 I got the pigtails just need to match them up with my wires on the car. Also I’m going from halogens to the xenon
Kahl I think if you push the directional handle forward it locks on the high beams....so to pull it towards you is the flash to pass they say or temporary on but pushing that handle forward will lock the high beams on ….just trying to help my friend
Ummm if the headlight switch is in the off position while the car is running and you have 12v at the wire you deemed the parking light... isn't that one the drl?
Can you do older gen to new GEN tail lights for a Challenger video
Gotta ? So I hooked all the wires up as saw and my high beam isn’t working but everything else is I connect to the white and green wire as it shown and it still isn’t working for sum reason please hmu willin to pay for a lil help right on
How much do you charge for swaps?
If Tim is mopar Jesus, Khal is mopar Moses.
Do a video on how too do a steering wheel swap from 15 and up charger too 11-14
Also noticed you got a cluster from a 2015 and up, can you do a full dash swap from a 15 to a 11-14??
hopefully whipple is sending you out a new supercharger you got rotor lock like a bearing let go or you sucked something into it from the road seen one one time it somehow sucked a trim screw into the supercharger and got lodged between the rotors....when ever I work on them I have various caps for the throttle bodies and I keep them covered at all times and constantly check before putting the intake tube and filter on and never run it without the filter on the throttle body...its like a huge vacume cleaner
make a video wiring 300 reverse lights pahh 🔥🔥
🔥
Look up power probe, test light will give you different options
Door and window assembly
I wish you did a Chrysler
🇯🇲🇯🇲🇯🇲🇯🇲🦍🌐🏌🏾♂️
there no way u dont know how to leave the high beams on, instead of pulling the the handle towards you push it away from you bro
Do one for a 300 swap
Lol it’s the same way
It’s easier to just read the diagrams
I always hated the way these chargers looked. Everything pre 2015 looks awful. Dodge hit them spot on post 2015.