Amazing to see another video You do some great work Love to see what you do next The evolution of your work is very nice to see, love how every new build you seem to improve. Your customers must be very happy.
Dang Daniel, you always impress me on your build quality and how much you stuff into these. As I have been building my own system for the last 7 month I can see how first had how crazy and hard it is. well done, always.
I wiuld enjoy a tutorial on how you did the back end wiring if this beast. Stuff like explaining the power supplies and showing hiw you install the screen. Its certainly less sexy but a crucial part od the build. Keep the content coming!! Thank you!
They made a few arcade games back in the day that were very difficult to play to get those extra coins in their pocket! Zaxon was one of them and even worse was Super Zaxon!
This is an amazingly beautiful build! 🥹 The build I'm currently working on is 157 cm wide. Utilizing the AtomMan G7 PT, 4 Mayflash Arcade sticks (2 - F700 Elite and 2 - F500 Elite). 2 Retro Shooter MX24 light guns and a Logitech G920. The entire unit is modular and transforms from a 4-player standup unit to a single player sit down racing unit.
Awesome build as always. Could you do a video on how you pack these for transport? It would be interesting to see how you ensure these actually reach the clients in one piece.
That screen on the controll board would be a prime spot if you could display each games controls. I have thought about incorporating something like that to my marquees. It's just a thought as that would be a massive project.
Can you build arcade machine with LG C4 42" OLED? That will be amazing to watch. I suggest this as your next project, i think you will get a lot of views as well. Greetings from Israel.
Omg! mad dog!!! I totally forgot about that goame!! Hey what are the chances of getting an arcade machine made? I know it would not be cheap but i would love one
Amazing build. What rgb controller are you using. I used to have this one called wolffen or something like that before I went to ultimarc. I can see your buttons turn on when you turn on the pc. Ultimarc doesn't let me have buttons light up without being in keyboard mode and in bigbox. It doesn't let me light up anything wither when I switch to xinput.
Another amazing build Daniel! You keep raising the bar. Quick question though, you mentioned in another video that you might switch to Launchbox / Bigbox instead of Hyperspin / RocketLauncher. Have you given much thought regarding that? Thanks
Daniel, would you mind sharing how many amps you use for the 12v and 5v dedicated PSUs? I am building a 4p large Arcade and I didnt want to buy it too small or too big for no reason. Love the content by the way!
Hyperspin is the Father of all these frontends. So many plug-ins and ways to customize your builds. I still prefer it but Batocera is starting to come in a close second since it's made my Sinden guns plug and play. Batocera runs in Linux and is pretty fast to load, too.
Hi, Hyper Arcade Systems supplies the harddrives with Hyperspin / BigBox / Launchbox 👍🏼 shipping to Australia is possible for sure, you can always contact me to share your thoughts: thedanielspies at gmail.com
I found out over the years that PC power supplies are far more reliable than the flat switching supplies. They are far less expensive, have a higher amperage rating and last much longer. To me reliability is more important than anything.
Hello Daniel, Nice build, Are there any servo switches (4/8 way) for Joysticks that aren't made by just one company? I built my own spinner with the insides of a mouse and the disc and bearing of an old hard drive. It works well. I like to use alternatives when I can. Flight stick too. I bought one, but it fell apart. I don't know where to buy one as they all look the same. I want a good quality one that isn't just bought and resold at a higher price by another vendor.
@@TheDanielSpies_Arcades I have purchased from Andy, but it takes a long time to get whatever I am buying. I appreciate the quality, but don't have someone with unlimited money to buy for me so I try to find the best price and so on like an average Joe. :) So there are no alternative servos or flight sticks that you know of?
Amazing! So, you must have a waiting list of a few years right? I’m curious what it would cost.. are there price ranges you can give for different types of cabinets?
Love your work. Just one question: why kept using Hyperspin? Its kinda obsolete now and the part that keeps it alive(Rocketlauncher) its not active like a few years ago. Also Hyperspin its dessigned for 4:3 display ratio.
@@TheDanielSpies_Arcades Launchbox all the way yeah. I Know Hyperspin its free but an arcade with BigBox are in another level. Configurations are pretty simple too.
@@TheDanielSpies_Arcades 🥹 how do people order with you? Do they visit you to discuss? I’m wondering about cost (I have a good idea what it might be for bespoke cab).
Hi, as you might have seen, I never talk about pricing on social platforms. This always results in many reactions from people with strong opinions that find it ‘over’ (or under) priced.
Amazing to see another video
You do some great work
Love to see what you do next
The evolution of your work is very nice to see, love how every new build you seem to improve. Your customers must be very happy.
I love the theme you are using !
Like always it's all over the TOP 🤣
I have learned so much watching your videos. I am finishing up a 48" oled cab and its been so much fun. Thanks Daniel!
Love it. Finally you made the marquee facing you and not the sky. Excellent work
Amazing work as usual. You sir are a master craftsman. 👍👍
Beautiful build man. That is exactly how I would want to set mine up. Chris Shaw's drive is by far the best one out.
Amazing work Daniel! Beautiful machine from all angles. Love the unique theme and the buttons look great!
This is possibly THE ultimate custom arcade cabinet. Not sure if I've seen a better one. Awesome work.
Thanks 🙏🏼 ❤
This was awesome. Can't imagine what "an even bigger an more complex build" looks like.
What a fantastic build my friend. Very high quality and looks amazing, I especially like the hidden drawer. Keep up the awesome work
Dang Daniel, you always impress me on your build quality and how much you stuff into these. As I have been building my own system for the last 7 month I can see how first had how crazy and hard it is. well done, always.
Another great work Daniel , your Neo Geo machine in the background also looks great !
I wiuld enjoy a tutorial on how you did the back end wiring if this beast. Stuff like explaining the power supplies and showing hiw you install the screen. Its certainly less sexy but a crucial part od the build. Keep the content coming!! Thank you!
The next video will just do that - It will be 50 min long or so.
Nice designs on your arcade cabinet
They made a few arcade games back in the day that were very difficult to play to get those extra coins in their pocket! Zaxon was one of them and even worse was Super Zaxon!
That's what MAME is for. The cheat codes level the playing field.
This is an amazingly beautiful build! 🥹
The build I'm currently working on is 157 cm wide. Utilizing the AtomMan G7 PT, 4 Mayflash Arcade sticks (2 - F700 Elite and 2 - F500 Elite). 2 Retro Shooter MX24 light guns and a Logitech G920. The entire unit is modular and transforms from a 4-player standup unit to a single player sit down racing unit.
You my friend are a true artist and master! Wow well done. I wish I could afford this cabinet...
Phenomenal! Also love the Mad Dog!
another work of art! beautiful buddy 😍
Espectacular!!!! a great job!!!
What an amazing works my dear, amazing, I will contact you soooon for my cabinet!!!!
Very nice Daniel. Love the details
Always top shelf stuff from you!
Great work 👍🏻
great work as always daniel 👑👏🏼👏🏼👏🏼👏🏼👍🏼
The next arcade has a 50 inch!! Let’s go 🎉✋🥳🤚🎉
Awesome build as always. Could you do a video on how you pack these for transport? It would be interesting to see how you ensure these actually reach the clients in one piece.
That’s dope
Good size TV for virtual pinball. Not a good orientation but still a good screen.
Mad dog McCree what a game what was
Artist!
What a unit.. 😲
Ah-MAZING!!!!!
I don’t want one … I NEED ONE!! 🤯👍✨
That screen on the controll board would be a prime spot if you could display each games controls. I have thought about incorporating something like that to my marquees. It's just a thought as that would be a massive project.
Yes this is very easy to do indeed!
You are amazing. That is all I have to say. Wow.
Also. Subscribed.
That’s really super
Very nice!
Great video and great build! I’d love to know what amplifier you used in this build as I’ve searched for a similar one and cannot find it.
great great great !!!!!!!!
Hello Daniel.
Can you give me the specs/info of the keyboard you included in the control panel? Love the size and look of that keyboard.
Nog steeds een Legend hoor! One day😅....
Haha 💪🏼 ik hou je daaraan ;)
@@TheDanielSpies_Arcades ❤️💯
Holy sweet mother of all that is Holy......................NICE.
luxury is subjective...
Awesome work. However, ever since I have experienced MISTer FPGA, I have cooled on the whole software emulation thing.
How did you make the tray for the light guns and Xbox controllers
Shaper Origin! 😍
Can you build arcade machine with LG C4 42" OLED? That will be amazing to watch. I suggest this as your next project, i think you will get a lot of views as well. Greetings from Israel.
Great video. ballpark figure. how much is one of these amazing cabinets?
That depends on all the features, I make affordable models and really expensive models as well ;-)
Omg! mad dog!!! I totally forgot about that goame!! Hey what are the chances of getting an arcade machine made? I know it would not be cheap but i would love one
You can always contact me by email: thedanielspies at gmail.com 👍🏼
Wow that's a beautiful piece of art, amazing work! Do you ship to the US and if so what would an average cost be?
Amazing build. What rgb controller are you using. I used to have this one called wolffen or something like that before I went to ultimarc. I can see your buttons turn on when you turn on the pc. Ultimarc doesn't let me have buttons light up without being in keyboard mode and in bigbox. It doesn't let me light up anything wither when I switch to xinput.
Only works in Keyboard mode , I use 2x Ipac Ultimate IO boards
@@TheDanielSpies_Arcades yeah that's what I'm using. What do you use to make them light up outside of the front end?
Another amazing build Daniel! You keep raising the bar.
Quick question though, you mentioned in another video that you might switch to Launchbox / Bigbox instead of Hyperspin / RocketLauncher. Have you given much thought regarding that?
Thanks
I am still investigating 😇 I love Chris his drives and Launchbox is installed on these.. might use Launchbox in the next video
Needs an anti glare matte screen
Especially for video shoots indeed :-)
This is awesome, where can I request one made for me?
Hi, thanks 🙏🏼. You can get in touch by email: thedanielspies at gmail.com
Daniel, would you mind sharing how many amps you use for the 12v and 5v dedicated PSUs? I am building a 4p large Arcade and I didnt want to buy it too small or too big for no reason. Love the content by the way!
Hi, I usually use 10A for Arcade cabinets. or pinball, this is a totally different story. The 5V leds alone need 30A or so haha.
Where do you get the clear milky white ball tops? I have the hollow shafts for RGB LED's but can't find balltops.
Ultimarc sells then 👍🏼
What angle do you recommend for the display? Wanting to build an arcade for myself one day.
When you are ready to make your own - I do sell the designs of any of these builds 👍🏼
Do you always use hyperspin or do you have another front end you like to use? Have you ever worked with coinops?
I am leaning towards switching to Launchbox Bigbox 🤔
Hyperspin is the Father of all these frontends. So many plug-ins and ways to customize your builds. I still prefer it but Batocera is starting to come in a close second since it's made my Sinden guns plug and play. Batocera runs in Linux and is pretty fast to load, too.
Who's Gaming System do you use? HyperSpin, Big Box from which person? Do you build for people in Australia.....I live on the Gold Coast, Qld Australia
Hi, Hyper Arcade Systems supplies the harddrives with Hyperspin / BigBox / Launchbox 👍🏼 shipping to Australia is possible for sure, you can always contact me to share your thoughts: thedanielspies at gmail.com
How much would it cost to build me an arcade like that with shipping to the U.S… Or where could I go to get the plans to attempt to build my own
Hi, you can email me at thedanielspies at gmail.com for inquiries and custom plans
I found out over the years that PC power supplies are far more reliable than the flat switching supplies. They are far less expensive, have a higher amperage rating and last much longer. To me reliability is more important than anything.
Power supply for cb .... linear .
Nice tip, thanks
can you share a game list file somehow? I worry some of the games I would want aren't on it...
See hyperarcadesystems.com for his drives 👍🏼
What is the Price and where do I get it? How many games does it have?
You can’t get ‘it’ sorry ;-) all my builds are unique and custom build.
@@TheDanielSpies_Arcades then put a link to the parts. I kind of figured you’d see that because I live in Canada
I would go for the custom if you tell me how much. My favourite TV show is Star Trek.
It’s the games and the gun like for duck hunt
Impressive machine! I hope not too much beer is spilt on it. Is the backend Retroarch?
Hyperspin / Rocketlauncher 🚀
Incredible... What is the reason you are still using hyperspin?
What would you recommend? Launchbox?
@@TheDanielSpies_Arcades Absolutely, upgrading to Big Box is a must ! I'd be happy to show you the drive I use and the configuration. Let me know
Hello Daniel, Nice build, Are there any servo switches (4/8 way) for Joysticks that aren't made by just one company? I built my own spinner with the insides of a mouse and the disc and bearing of an old hard drive. It works well. I like to use alternatives when I can. Flight stick too. I bought one, but it fell apart. I don't know where to buy one as they all look the same. I want a good quality one that isn't just bought and resold at a higher price by another vendor.
I always use Ultimarc as their quality is top notch in my opinion.
@@TheDanielSpies_Arcades I have purchased from Andy, but it takes a long time to get whatever I am buying. I appreciate the quality, but don't have someone with unlimited money to buy for me so I try to find the best price and so on like an average Joe. :) So there are no alternative servos or flight sticks that you know of?
Amazing! So, you must have a waiting list of a few years right? I’m curious what it would cost.. are there price ranges you can give for different types of cabinets?
I do have a spot left in 2027 😝 - just joking, you can always email me for inquiries 👍🏼
How much? The customer must be a millionaire!
Love your work. Just one question: why kept using Hyperspin? Its kinda obsolete now and the part that keeps it alive(Rocketlauncher) its not active like a few years ago. Also Hyperspin its dessigned for 4:3 display ratio.
Recommendations are welcome, Launchbox?
@@TheDanielSpies_Arcades Launchbox all the way yeah. I Know Hyperspin its free but an arcade with BigBox are in another level. Configurations are pretty simple too.
How much would something like this cost?
Totally depends on the materials, time and complexity. You can send inquiries by email 👍🏼
Do you have a website Daniel?
Not yet 😅
@@TheDanielSpies_Arcades 🥹 how do people order with you? Do they visit you to discuss? I’m wondering about cost (I have a good idea what it might be for bespoke cab).
@@WonPXL Hi, you can contact me by email most easily: thedanielspies at gmail.com Thanks, D
How much did the client pay for this build?
Hi, as you might have seen, I never talk about pricing on social platforms. This always results in many reactions from people with strong opinions that find it ‘over’ (or under) priced.
Shame they dont make this in France !!!! 😢😢😢
I ship all around the World. Even to France 🇫🇷 🎉😂
@@TheDanielSpies_Arcades ok good New. Do you have site please
I want… how much?
Assuming 4-5000$ and that's a conservative estimate haha
house of dead 4 can actually shake to reload =)
Now THAT is a good tip ❤ - luckily I normally play without a camera in my other hand 😂😂
Your guns are the best in the industry btw. 🙌🏻
What is your email address? Sorry I couldn’t find it.
Thedanielspies at gmail.com 👍🏼