GX460 Starter Kill Installation...better than Ignition Kill !!!
Вставка
- Опубліковано 18 лют 2024
- RELAY AND HARNESS COMBO AT THIS LINK BELOW:
www.amazon.com/Hamolar-Pack-R...
MOMENTARY PUSH BUTTON SWITCH AT THIS LINK BELOW:
www.amazon.com/Momentary-Swit...
WIRE STRIPPERS AT THIS LINK BELOW:
www.amazon.com/Stripper-Stran...
CRIMPER AT THIS LINK BELOW:
www.amazon.com/Non-Insulated-... - Авто та транспорт
Thanks Bob 👍
Hopefully the instructions were easy enough
Mr.GX BOSS
An khang thịnh vượng và vạn sự như ý 🍾🍾🍾🍾🍾🍾🍾🍾🍾🍾
Thanks Happy New Year!
Hey bob could u drop some knowledge videos on replacing belt, pulley and tensioner when you need to do youres ! Need me some tips apreciate ya cheers.
Absolutely!
Bob the man the myth the legend. Quick question, how would you run power to second row from the 110v outlet in the back? Just want to take a non invasive approach. Thank you!
110v outlet and non-invasive don't go together. It involves running large gauge wires from your battery to a circuit breaker or inline fuse then to an aftermarket inverter then to location of your outlets. This project requires taking out quite a bit of panels for a custom install. OR you can just get a power inverter and plug into your cigarette lighter which is ugly and that is probably the least invasive route.
@@GXBOB that’s what I thought. Thanks Bob!
Seen on Craigslist: late model GX460, white in color. It runs great (when it starts). I havent been able to start it ever since i installed the 3rd electric circuit interrupt. I figured, what the he**. At least it wont get stolen! Unless they have a tow truck...😂😂😂😂
lol. True. It won’t get stolen for sure.
Great video! will the button titled "Horn Push Button Switch (ON)-Off Momentary Switch with Wiring Kit for Toyota Tacoma 4Runner Tundra 3Amp 12V" from Bacautoparts on Amazon work?
Yes , but that’s a 4 wire system so you’ll have to figure out how to pulse a negative current to your relay but that’s an excellent idea. I might attempt that.
@@GXBOB I've used those buttons before. They fit and look close to OEM and it is nice to get rid of the blank tabs! I'll post a video below how they look in my GX
@@GXBOB ua-cam.com/video/hGj2NUmTz8U/v-deo.html
@@GXBOBLet me know the wire configuration if you put that button on and don't make a video. Its not letting post a link in the comments. You can view the wiring set up I did for this button and a 5 pin relay at 7:50 of a video on my channel titled "Lexus GX460 Wireless Apple CarPlay and Android Auto Installation with Front Camera" as well as 2:45 of a video on my channel titled "Secret LED Light Bar for Lexus GX460 Installation Video".
@@austinc691I’ll check it out
Awesome video! Completely off topic……do you know what size are the front skid plate bolts and where I can buy them other than at the stealership?
a.co/d/6NbXCL3
@@GXBOB Thank you GXBob! You are my GX Superman once again!
Bob, I think tapping into the wires right behind the start button is not a good idea. Criminals are aware of how easy it is to remove that button and once they see spliced wires they will attempt to reconnect them. It won't take long, so this may not be enough to discourage them from stealing your car. I have just traced the wiring diagram and those red and green wires go to the power management ecu, which is located behind the dash between navi and the glove box. Perhaps this would be a better place for tapping into the system. There is no way thief would trace it nor hot wire it in a short time. BTW, our cars are equipped with remote start, so thieves may be able to start the engine through obd port and this kill switch will not work. I've seen some people relocate factory obd port to mislead clever thieves and install fake one in place. I'm actually thinking about installing such fake port, but in addition I will connect 24v battery to it, so it fries thief's device once connected.
Hey Chopper! Thanks for the input. If a thief wanted your truck, there is nothing you can do to stop him. The best you can do is slow him down. If its a professional thief, he would have trained himself how to steal your stock truck. They do not like any home or vehicle that has additional deterrents that wastes their time. A compromised system with double relays and spaghetti wires running all over the place will slow him down. A second switch will also be a huge factor in him staying or giving up on your truck. Again, thanks for the input.
@@GXBOB Totally agree, however, I really like the idea of frying their expensive device, so they don't steal another car. The clue is to connect higher voltage to TX/RX pins, so high voltage fries the communication bridge on their very expensive device. They would think the car has broken CAN and walk away. They would never know I did it, because their devices would start up just fine, so chances of retaliation are close to zero. Since those cracking boxes have been purchased on darknet, I don't think thieves have option to file a warranty claim😁 Instead, they have to buy a new one, which cost way over a $1000.
Hey Mr Bob , I have an issue with my Gx 2013 the car lose some power especially when I go up hill or when I reverse the car on uphill it doesn’t move
I already cleaned the exhaust, EGR, Fuel tank, Airflow all that but nothing was helpful for my problem. I hope that you will find the solution for me
By the way the car got this bad torque suddenly when I was going uphill
It’s really difficult to diagnose over text message without physically being there to check it out. Almost sounds like your tranny starting to go out but it could be a multitude of things causing that.
Last week I’ve checked the transmission oil and it was black and smells like burnt so I’ve changed it three times already they told me to change it like 6 times to clean itself and every two days I do that
What do you think about that?
Hey Bob my 2019 gx460 the go over 60 miles the car is vibration need your advice Cam ơn anh nhiều
Wheel balance.
Hey Bob’ what fenders trim do you recommend on GX?
Your fenders only come in one trim. Did you mean what GX trim? I went with base model so that I can build it up myself. If I didn’t have the UA-cam channel I would have gone with sports edition.
Hi Bob I have GX460 base model, you know there are empty switches for Sport/Height, I am looking for a switches that can be used for something else maybe like turn on/off my RGB light or something, but I am not sure if I purchase OEM switches if it will work, do you know if I can just wire it and use it or any aftermarket replacement for sport/height switches to wire it to my RGB light ?
I did a lot of research but couldn’t find anything
@@bakhe_1 go down the comments and read @austinc691. He’s done it with an oem switch and has a video on his channel on how he did it.
Will this work for a Toyota Tundra 2021 with push start?
The concept is the same but the wiring schematics might be different.
What about having the switch on the fuel pump circuit ?
If you keep the starter intact you may have the same issue with the ignition kill video; the motor will continue to try to start without a means to keep it started.
@@GXBOB thanks. I had a car years ago that had a secondary switch in it, to get the car out of park you had to press the brake and a hidden switch at the same time.
@@davidm.8309 Honda CRX? I think I sold you that car.
Anyone know if wires changed with '22+ models?
Hey Shawn, all you have to do is pop your ignition start button off and look at the wires. Use a test probe to find out which wires light up when pressing the start button.
How about a serpentine belt replacement?
I found it the same as toyota tundra, you could search this, with the tensioner instalation.
thanks Edmond for chiming in!