DIY Electric Skateboard
Вставка
- Опубліковано 2 жов 2024
- I try to explain all the details that go into designing an electric skateboard.
Parts List:
Belt: HTD 300-5M 10mm Wide
Pulley: HTD 5M-20T-11W 6mm 8mm 10mm Bore 5mm-Pitch Timing Belt Drive Pulley 20 Tooth
Grub screws for motor bracket: 20PCS M5*12mm 316 A4 Stainless Steel Grub Screws Cone Point Hex Socket Set Screw
Wheel Mount Kit: 16PCS DIY Electric Skateboard Parts Pulley Motor Mount Kit For 83/90/97MM Wheels
Bearings for Motor: 10Pcs 6800Z 10 x 19 x 5mm Single Row Shielded Deep Groove Ball Bearing N4U5
Battery: ZIPPY 5000MAH 3S 11.1V 20C LIPO BATTERY
Charger: Topselling IMAX B6 80W Intelligent 1-6 Cell XT60 RC LiPo Battery Balance Charger
Wheels: Blank Pro 90mm Blue Longboard Flywheels + ABEC 7 Bearings + Spacers
Better Bearings: Bones Reds Precision Skateboard Bearings, Set of 8 Pack Precision Size 608
Trucks: Paris V2 180mm Amanda Powell Signature Longboard Trucks w/ Free 1.25" Hardware
Motor: SAITE outrunner 190KV MOTOR (No sensors)
Remote Control: Mini Remote Controller w Receiver (2.4Ghz)
ESC: Maytech Benjamin Vedder ESC (Vesc)
SOFTWARE:
Download Link for BOTH NEW AND OLD BLDC TOOLS: megaupload.nz/...
If download link doesn't work use these links:
(you will need to create a free account and enter random information to get the download)
NEW VESC PROGRAM:
www.vesc-proje...
OLD VESC PROGRAM:
www.enertionbo...
NEW Vesc Tutorials:
• Video
OLD Vesc Tutorials:
• Configuring VESC with ...
• HOW TO BUILD A DIY ELE...
Music:
Mich - Sea of Envy
Envision Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommon...
Help support me so I can make more videos:
Twitter: / sirspunk
paypal: Scicynical@gmail.com
streamlabs.com...
You can also donate FOR FREE by installing Streamlabs OBS for FREE. I get $1 for every install through this link: streamlabs.com...
What "counts" as an install is of course installing and opening the app then streaming for the first time or closing the app. Every little bit helps, thank you! - Наука та технологія
A lower kv motor doesn't mean a bigger motor. It means how many rpm you get per volt (unloaded). A lower kv rating means slower speed, but higher torque. A higher kv would be higher speed, but lower torque. Personally for my build, I used a 170kv motor, because it gives a lot of torque necessary to climb huge hills, and has more than enough speed.
Motor size on the other handis classified by four digits - motor diameter (mm) for 2 digits, and motor length (mm) for 2 digits. An example of this would be a 6374 motor, as it appears you are using. the 63 means the diameter of the motor is 63mm, and the 74 is the length of the motor. Other common sizes include 5054 (often used in prebuild boards), and 6354.
Nice board though and good job explaining everything with detail.
Amazing video; I really enjoy long detailed videos compared to short videos that skip over a lot of the details. Keep up the good work!
Look into a parallel balance charging board for your battery charging.
Read up on voltage difference requirements of batteries to charge in parallel.
Good work buddy! Lots of details and lots of effort on your part for the ESK8 community
Sick
dude, post more videos about your cnc co2 laser!
Charging at 5a would be a standard charge for a 5000mah pack.
That is 1c.
10amps would be a fast charge.
0.5a is just crazy crazy slow.
I'm aware of this, but if you have plenty of time, or maybe charging overnight, as a personal preference I like to charge the batteries slowly. Less heat and more peace of mind for me.
@@SciCynicalInventing charging lipo's unattended (overnight) is far more dangerous than monitoring at 1c charge rate.
@@ryanokeefe12 Whos to say im not keeping a sensor near the batteries to monitor overnight charging?
@@SciCynicalInventing cop out response. regardless, in answer to your question, it doesn't take long at all for a 3s lipo to start a decent fire when it's near full charge.