Repairing a Logitech C-920 webcam
Вставка
- Опубліковано 13 вер 2024
- The broken USB cale is one of the most common problems on the Logitech Webcams, especially the C-920.
Two of my cameras has a broken cable already, in this video I'll disassembly and fix the cable internally.
This video was recorded a while ago, but due to moving I completely forgot about !
Good luck getting those first 4 screws out. It's 47 times harder than anyone ever shows. You'll need the world's smallest phillips head with a big giant handle.
I agree bruh, it wreck 2 sets of me precisions, dammit..
I fixed mine by replacing the USB end of the camera. It's much easier.
How did you do that? I think I have the same problem.
@@ramoaltab7841 I resliced the wires. That did not last long, after a short while, the images started to distort. I ended up just getting a better webcam, the price has come down drastically.
Thanks! You help me very much!
Valeu! With my c920 it was enough to firmly push the cable connector down on the board
What are the exact symptoms of cable breakage? Is the camera still recognized by the PC somehow? I bought a used C920 and it is not recognized at all, nothing happens when I plug it in. Do you think it is also due to the cable? Thanks a lot!
mine started with losing connection, them it stops been recognized at all, then if I hold the cable against the camera, close to the camera case, It sometimes beeps.
@@AngeloCoelho Thanks a lot :) !
mine just didnt work at all, turns out the cable was in half, so having to replace it XD
You did not try to connect it to your computer? How do we know that it has been fixed?
What you mean?
It's working, it's connected to my computer, and I still using it until today...
@@AngeloCoelho nice..
does this use the same cable like the c922 pro?
I think so, I don't have a 922pro, but I have a 930 and it's the same !
As usual with Logitech this cable design is so trash! Their junk literally designed to last up to the week before warranty expires. This cable design will be ok if you have ZERO strain on it. Otherwise it will fail if you move camera often.
Holy shed, u too?
is it possible to replace the cable on my c920 with the cable from a broken c270 HD are the cables exactly the same?
How to turn off this LED light during the movie?, or desolder so that this light does not come on. ?
Not clear just open and fix it. I ate the usb connection please advise
If you don't know how to use especific tools, better pay someone who knows !
believe me !
i dont have a iron thing to solder my wires, is there anywhere you suggest to send my webcam for them to fix my wire? thanks.
and my hands are shaky too so im scared about doing this, the replacement wire i can get as cheap as £3-£8, which is great. But im scared if i go to a shop they will charge me tripple
@@Laugade for sure if you bring to a shop, the price will be almost the price of a new camera, as a Tech, I could say that, it will be a minimum 30 minutes job, if the person knows what they are doing, and usually repair places charges minimum 1 hour labor, they have expenses, taxes, rent, and several other overhead to be covered !
@@AngeloCoelho yeah for sure which I understand, but I don’t have these expenses to pay. By the time I go to a store and get it fixed, I might aswell by a new one. But I’m going to definitely try my best and fix my one! Thank you.
Espetacular
is there anyway of doing this without a soldering iron?
and where can i get the black peaces for the cable?
Not that I know !
what key did you use to open it? I bought two kits and neither key worked
A small kit of screwdrivers I got I think from Amazon
Have same issues, my cable broke near the usb connection I put another usb cable, Soldered it all but still it says problem recognizing the camera. Also the connection where to put the usb on motherboard has disconnected. Not sure if the connector needs to be soldered to the motherboard?
Can I send you mine to repair the cable?
Sorry but I can't do any repairs for now, and the price I charge is not worth for small repairs like that ! try to find some local repair shop !
@@AngeloCoelho biggest problem I'm having is removing the insulation of the wires so I can solder them. I keep cutting them instead. Already tried different pliers.
Most common problem is the cable and it is that hard to get to it. Don't buy this product. You have the right to repair this with less efford.
I have Broken streamcam