Concrete Masonry Unit |CMU| |SAES-M-100|
Вставка
- Опубліковано 7 вер 2024
- CMU Concrete Masonry Unit
The average compressive strength, on the average net area of 3 CMU units shall be at least 1900psi (13.1MPa) and at least 1700psi for one unit. (IBC 2009 Sec. 2103.1 / ASTM C90, Table 2)
Mortar to be used shall conform to ASTM C 270. ( IBC 2009 Sec. 2103.8)
The specified compressive strength of mortar is not be less than 12.4 MPa (1800 psi).
GENERAL REQUIREMENTS
Special coves, corners, bull noses and other special shapers shall be furnished as indicated or required, subject to supply by manufacturers.
ii. Concrete, CMU & Brick shall be free of laitance, loose materials, oil or other materials that reduce or prevent bonding with mortar.
iii. Walls shall be laid-out to establish accurate spacing of bond pattern, to ensure uniform joint widths, and to locate openings, movement type joints, returns and offsets. Units shall be arranged in a manner which will result in few or no units to be cut.
iv. Tops of walls shall be protected with a non-staining waterproof covering when work is not in progress.
a) Project Specifications & Drawings:
Standard IFC Drawing
b) Saudi Aramco Standard Drawings
AA-036602 Concrete Masonry.
c) Saudi Aramco Standards:
SAES-M-100 Saudi Aramco Building Code
SAES-Q-001 Criteria for Design & Concrete Structures.
d) Saudi Aramco Material Specification System (SAMSS)
09-SAMSS-088 Aggregates for Concrete.
09-SAMSS-097 Ready-Mixed Portland Cement Concrete.
09-SAMSS-016 Concrete Masonry and Concrete Building Bricks.
e) Saudi Aramco inspection Test Plan & Check List
SATIP-M-100-01 Concrete Masonry Units and Building Bricks
SAIC-M-1006 Concrete Masonry Unit (CMU) Compressive Strength and
Aggregate Test Reports.
SAIC-M-1007 Masonry Materials Receiving and Storage Inspection & FBE
Rebar and Embedment Receiving Inspection.cmuCMU
SAIC-M-1008 Concrete and CMU Surface Preparation and Protection
Inspection.
SAIC-M-1008 Masonry Units Installation
B) STORING
i. CMU and its accessories shall be received, handled, stored
and issued in accordance with herein specified procedure.
ii. Masonry units shall be stored above ground on level
platforms that will permit circulation of air and prevent
excessive moisture absorption.
iii. Masonry units shall be covered and protected from wetting prior to use.
iv. Masonry units shall be carefully handled either individually or in suitable groups to keep units whole. Sharp edges and undamaged faces shall be maintained.
f) Related International Standards
ASTM C 150 Standard Specifications for Portland Cement
ASTM C 33 Standard Specification of Concrete Aggregates.
ASTM C 140 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
ASTM C 129 Standard Specification for Non load bearing Concrete Masonry Units.
e) Saudi Aramco inspection Test Plan & Check List
SATIP-M-100-01 Concrete Masonry Units and Building Bricks
SAIC-M-1006 Concrete Masonry Unit (CMU) Compressive Strength and
Aggregate Test Reports.
SAIC-M-1007 Masonry Materials Receiving and Storage Inspection & FBE
Rebar and Embedment Receiving Inspection.cmuCMU
SAIC-M-1008 Concrete and CMU Surface Preparation and Protection
Inspection.
SAIC-M-1008 Masonry Units Installation
ASTM C 129 Standard Specification for Non load bearing Concrete Masonry Units
ASTM C 94 Specification of Ready-Mixed Concrete.
ASTM C 476 Standard Specification for grout for Masonry
ASTM C 270 Standard Specification for mortar for unit Masonry
ASTM C 144 Standard Specification for Aggregates for Masonry mortar
ACI 305R-77 Hot Weather Concreting
ACI 530 Building Code Requirements for Masonry Structures.
a) Project Specifications & Drawings:
Standard IFC Drawing
b) Saudi Aramco Standard Drawings
AA-036602 Concrete Masonry.
c) Saudi Aramco Standards:
SAES-M-100 Saudi Aramco Building Code
SAES-Q-001 Criteria for Design & Concrete Structures.
d) Saudi Aramco Material Specification System (SAMSS)
09-SAMSS-088 Aggregates for Concrete.
09-SAMSS-097 Ready-Mixed Portland Cement Concrete.
09-SAMSS-016 Concrete Masonry and Concrete Building
#aramco #civilengineering #2iconstructions #approvals #concrete #construction #CMU #Blockmasonry
Thank you sir
So nice of you
Dear sir Load bearing standard is C-90
Yes,
C90 for Load Bearing Masonry Unit
C129 For Non-Load Bearing Masonry Unit
Dear load bearing is astm c90
Non load bearing is astm c129 please correct you vedio then again upload.
Thank you for your correction.
It has already been clearified in previous comment...
Again thank you