If u read directions for the amp and seen the LIMITER switch u would seen more power and understand why it was reading a constant 13.6 volts !!!! I tried to tell u 2 years ago about the switch that limits voltage to 13.6 volts and u can. Turn it off and then run high voltage and do high wattage burps with the amp.
I think these Dyno runs should start at 4 ohm and end at tvm ohm. I believe this way the amp is warm before it gets to 1ohm , stressing the amp is also part of the dyno run which test its capability to stand up to some abuse music abuse. Let’s see if amps can stand the pressure.
HI MY NAME IS ANTONIO AND I HAVE A PORTED BOX WITH 2 ROCKVILLE 12S AND THEY PUSH 4000WATTS EACH WILL THIS AMP PUSH THEY OR CAN I GET A 8 CHANNEL AMP TO ALSO PUSH THE DOOR SPEAKERS AND I HAVE A QUESTION WILL A 8 CHANNEL AMP PUSH THE DOOR SPEAKERS AND MY 2 ROCKVILLE 12S
????? WHAAAAAAAAAAAAT no fuckin way i need to cop 1 asap before more people see this and the price goes far outta my reach wtf i wouldve never thought ANY rockville amps did actual rated power im still in belief ALMOST 3k W. T. FFFFFFF
@@Facekicker it has a burp setting on the side called limiter was just asking if u had it enabled or off u want it off to do big dynamic numbers i have the comp 4 it does 3888 on 1 ohm clamped that my amp also sits at 13.6 volts before entire output section burned up
Nice. Maybe Rockville is trying to improve their image after the whole sub fiasco. That and the 3 different ratings on the amps. If it's a 1500 watt RMS amp, just give us that rating. We don't need some explanation like 3000 watt when comparing to Hifonics and 6000 watt when comparing to Boss. Just tell us what it really does. Maybe include a blurb in the add about not being overrated like some other manufacturers do.
I agree. Especially about the 3 ratings. Having a CEA rating that differs from what they called an RMS rating was not only wrong but caused tons of confusion. Now they're calling it CEA RMS only, which could be confusing to anyone still going by those prior Rockville definitions. But the good in all of it, we've got a budget amp that does rated power and it seems to be a very solid piece of gear that I wouldn't hesitate to use.
No what is happening here rockville had no choice to copy a comp level amp board so they had to spend more money to get the starter kits amp boards :D LOL
Have you tried any rockville k9d2 s if so more than just one? I got 4 15s about to do 6 12s in a new ride! No blown subs! Watt per watt dollar per dollar I can't find a better subwoofer! Definitely going to buy the amps now!
This is a perfect example of POWER IN = POWER OUT. Yes kids, if you want to run big amps, you need a good charging system to back it up. I'm very impressed with Rockville's amp here also.
THANKS FOR MY REQUESTED AMP I NEW THIS AMP MIGHT BE EPIC. I LOVED IT THANKS $349 AND ALMOST 4000 CEA RATED RMS WATTS CERTIFIED NOW THIS VIDEO IS GOING TO BE POPULAR. NEXT TRY DULE INPUTS AND .8OHMS OR .5OHMS I BET IT CAN HANDLE THAT AND WHO KNOWS HOW MANY CERTIFIED WATTS THAT WILL PUT OUT 4500 RMS WHO KNOWS SO FOR ALL THAT DIDNT THINK THIS AFFORADABLE KOREAN AMP COULDN'T DO RATED YOU GUESSED WRONG. THANKS FACEKICKER FOR TRYING THIS AMP FIRST😀
You're very welcome! Dual inputs won't fit due to the angled inputs and screws the amp uses. I still have it hooked up and may hit it with .5 or .8 dynamic on Monday.
@@Facekicker thanks for this video. I can't wait to see if it can handle .5 ohms because I have 2 dule 2 ohms soundqubed 18s and would need a .5 load for this to work for my setup. One more thing you should show the amp features next time and a close up look at the hookups.
@@Facekicker I've seen some angled dual inputs made by ILL Customs that will fix the stupid angled inputs on the amp and straighten everything out. I'm sure you wouldn't get them in time to use them for this particular amp, but they may be useful in the future to fix this kind of thing. It's probably worth the $19 they cost in aluminum. Not sure if they make a copper version.
@@Facekicker well than maybe try a 0 gauge to a 0 gauge distubution block 1 0 to the amp and 2 0 output to your power supply. Not sure if that would work? If not just use the thickest wire you can find.
@@Facekicker has the Wolfram arrived yet? Was looking at their amps last night but I'm not sure if I want to make a purchase on a product with an unknown eta. Though they are offering nice prices for those willing to wait.
BASSN SANE not a big deal but the Facebook group they asked what people thought results would be and everyone was hating on it and for the price of 349 4900 watts dynamic is pretty good
WTF why is there a volt meter that is not even calibrated correctly damn :D LOL rockville as a company try so so hard to fail faster :D LOLOL But I am doing just fine with my Twisted Sounds 3.5kw amp :)
Rockville amps are great in general. They sound amazing. The power is good but the sound quality is really stunning. It's because the mosfets they use are actually for making music.
Thats awesome about to they put out something worth a damn. There rockville destroyer is another story lol. But too bad they didn't come out with this sooner. I might have sprung for this over my orion HCCA5000.1 and saved $400 lol
Wow. Thats On Par For Taramps Cost Per Watt But It's A Korean Amp? This Is Actually A Pretty Good Budget Amp. It Might Be Really Bad On Efficiency Tho So Your Gonna Be Paying More On Ur Electrical To Power It.
That dang volt meter irks me but I'll be dammed if everything else wasn't impressive. Thanks for testing this thing, I've been looking to see what it can do.
@@Facekicker Rockville is garbage as a company, let’s get that out there right now. I’m not sure u should be doing amp dyno videos if u don’t know what dirty power is
@@Facekicker rated and dirty are two different topics, while yes it’ll put out rated if powered correctly, the signal won’t be clean and crisp, due to the lack of quality. the output filtration is very poor as well as many of the other generic circuitry. I’m no audio expert I’m just an audio enthusiast, but I know piss poor quality when I see it. And the brand alone disgust me because of their subwoofers and the fact they lied about them
@@younginfamou6053 the dyno test itself stops at 1% distortion on certified and stops at clipping on uncertified. It's not possible to complete a run on the AD-1 with "dirty" signal. Thus, the results in the video are clean power.
I figured it out a while back the volt meter is pulling off of the remote turn on if you have a relay going from battery to remote turn on it fixes the issue
@@willwilliams9237 that sounds like you're onto something. I've since switched to a relay on my bench for different reasons but that very well could have been what happened to me. My head unit was not putting equal remote voltage out as it was receiving, about a full volt lower.
Was wondering if you could review the Rockville RXH-F5 5 3200 watt 5 channel amp. I own this amp and really like it. Would like to know if it actually delivers on performance. No one has ever reviewed this amp as I have looked all over UA-cam and other sources.
I'll take an educated guess and say the DBComp4 and DBComp5 use the same power supply section and the DBComp5 just has one or more output devices. If this is the case, the DBComp4 may be more reliable as the power supply would be just a little less stressed. I have used 2 Rockville amps for over 3 years without issues and I might be lucky. Still very pleased with them. I ordered the DBComp4 based on this. I also believe and hope Cadence is still producing Rockville Amps. 30 years car audio experience and was a Cadence dealer for several years back around 2010. The Rockville amp manuals and the Cadence amp manuals are almost verbatim on certain models.
I ordered some 6.5s from them. Boxes were fine and even the Rockville boxes were fine but speakers were crushed all up that tells me they put them in the box like that from Rockville. Nahhh not again.
Try doing a amp dyno test of the rockvillEe rpa5 pro audio amplifier because I’m curious to know if their pro audio amplifiers can actually do their rated rms power.
How was the amps efficiency? And the amperage? Does the amp get warm/hot while resting? Just a few questions I’d like to know. I’m actually impressed, and you’ve got a new subscriber!
I didnt clamp the current, but that's something I'll likely try to cover in upcoming videos. As far as heat, it didn't heat up on the dyno, and it's been in a build since the video was shot, kicking ass ever since with no heat issues. It really seems to be a solid amp.
I bought one a week after this video posted and its running just fine doesn't get hot. Its seems efficient but that just me talking afther i finnaly got sufficient power. Im working on alt so i can see what it really do I was staying above 13 until i lost a battery im waiting on Rockville to put more out next month so i can run 2 best amp above 1500 Watts I've ever owned
I think their amps are decent. I have an rva-m2 hooked to a Skar SDR 12 in my work truck and it barely gets warm. I just wanted some decent sound in my daily driver without a big budget. I punish this setup daily and have had no issues. I can't say it is absolutely hitting its numbers but it certainly seems to be.
@@savikabudsuke8213 I've owned the amps..the db and phenom and neither impressed me..iv had the k9v2 in 10-12-and 15 and they are so so..my 15 at 700rms got stinky but not to shabby for music..the pair of k6 12s I had impressed me for the money...so I have hopes rockville is getting this ironed out...i have the 0 gauge wire in my durango and have had it for about 2 yrs..not bad....the components I got from them were sub par..tweeters couldn't handle power.
It says 3500 And did more, clean, on a certified test. Clean power = clean power You won't hear a difference vs another amp with the same certified results Longevity is the only thing in question here
@@Facekicker nah...had the phenom m4 was suppose to be 2200rms not even close..couldnt move my 12s...swapped out to a memphis mc1000 and it was slamming...i hope rockville has fixed the issues..i think it can be a great budget performing company...but they have a shit record to overcome..
So, those Rockville amps are Korean built? is it only the monoblocks, or the 4 channels too? And, does anyone know what the SQ is on the 4 channels amps?
Very impressed I might look into this amp although it’s hard to part with my Rockford Fosgate system. My new goal though is to build a high efficient system with less dollars Just to see all the new hype is with all the new products. I’m old school so we’ll see. Thanks great job.
I have a db12 on one Rockford P3d4-10 and am very happy. Seeing this, when I upgrade it'll be to the db comp series and a couple destroyers. I'm super impressed with that run on the dyno for sure. Didn't expect that at all.
Just subscribed because of this video. I got a question on the 1 ohm load did the amp get hot. And I haven't looked it up but is that based off of the hifonics and mb quart style amps it looks very similar to the inputs.
If u read directions for the amp and seen the LIMITER switch u would seen more power and understand why it was reading a constant 13.6 volts !!!! I tried to tell u 2 years ago about the switch that limits voltage to 13.6 volts and u can. Turn it off and then run high voltage and do high wattage burps with the amp.
I think these Dyno runs should start at 4 ohm and end at tvm ohm. I believe this way the amp is warm before it gets to 1ohm , stressing the amp is also part of the dyno run which test its capability to stand up to some abuse music abuse.
Let’s see if amps can stand the pressure.
the destroyer takes rated!! check out my vids
I’ve blown a kicker 15” l7 also 18” skar with the smaller version db Rockville very powerful amp. Beware !!!!
Rockville for the win!!! would love to see if The Rockville ATOM 8 Series 8 channel will do rated
HI MY NAME IS ANTONIO AND I HAVE A PORTED BOX WITH 2 ROCKVILLE 12S AND THEY PUSH 4000WATTS EACH WILL THIS AMP PUSH THEY OR CAN I GET A 8 CHANNEL AMP TO ALSO PUSH THE DOOR SPEAKERS AND I HAVE A QUESTION WILL A 8 CHANNEL AMP PUSH THE DOOR SPEAKERS AND MY 2 ROCKVILLE 12S
Is this better than skar audio
I got the 3k what's the diff in power I wonder.500?? Maby
Need more gain on the amp
What kinda amps did the amp pull
Unfortunately I did not clamp this run.
????? WHAAAAAAAAAAAAT no fuckin way i need to cop 1 asap before more people see this and the price goes far outta my reach wtf i wouldve never thought ANY rockville amps did actual rated power im still in belief ALMOST 3k W. T. FFFFFFF
What's it do at .5?
So is this amp a Korean board I did not expect this amp to do that and I think I'm gonna get a smart 5k or the skar sk3500v2 or 4500v2 still deciding
Chinese clone of Korean board, I had misspoke.
Whas the limter switch in or off for this test? Cant seem to find much info about it!
Off
So they make shit subs but great bang for your buck amps... Makes sense.
As a company they ARE improving though.
Maybe subs will be improved next?
I wanna see what that thing dose at .50 ohms I bet it's alot
Is this amp 1 ohm stable
Yessir
It has a limiter button for competition use u musta had it turned on turn it off it puts out another 1krms at 1 ohm 5k total 6k .8
This amp certainly won't put out 6k, and the results are excellent for a 3500w amp.
No limiter was set, this is the amps full ability.
@@Facekicker it has a burp setting on the side called limiter was just asking if u had it enabled or off u want it off to do big dynamic numbers i have the comp 4 it does 3888 on 1 ohm clamped that my amp also sits at 13.6 volts before entire output section burned up
Nice. Maybe Rockville is trying to improve their image after the whole sub fiasco. That and the 3 different ratings on the amps. If it's a 1500 watt RMS amp, just give us that rating. We don't need some explanation like 3000 watt when comparing to Hifonics and 6000 watt when comparing to Boss. Just tell us what it really does. Maybe include a blurb in the add about not being overrated like some other manufacturers do.
I agree. Especially about the 3 ratings. Having a CEA rating that differs from what they called an RMS rating was not only wrong but caused tons of confusion.
Now they're calling it CEA RMS only, which could be confusing to anyone still going by those prior Rockville definitions.
But the good in all of it, we've got a budget amp that does rated power and it seems to be a very solid piece of gear that I wouldn't hesitate to use.
No what is happening here rockville had no choice to copy a comp level amp board so they had to spend more money to get the starter kits amp boards :D LOL
Um this one is 12,000 when comparing to BOSS
Have you tried any rockville k9d2 s if so more than just one? I got 4 15s about to do 6 12s in a new ride! No blown subs! Watt per watt dollar per dollar I can't find a better subwoofer! Definitely going to buy the amps now!
@@clintrichardson8236 I haven't heard of a Rockville sub running "rated" power and not blowing
Is the amp for mids and highs or can you run subs to
This is a subwoofer amp
@@Facekicker thank you
This is a perfect example of POWER IN = POWER OUT. Yes kids, if you want to run big amps, you need a good charging system to back it up. I'm very impressed with Rockville's amp here also.
Great video bro. how much do they run any idea.
It seems they're out of production and cost if you can find them is now borderline unreasonable.
@@Facekicker just got mine finally for $399 shipped!!
THANKS FOR MY REQUESTED AMP I NEW THIS AMP MIGHT BE EPIC. I LOVED IT THANKS $349 AND ALMOST 4000 CEA RATED RMS WATTS CERTIFIED NOW THIS VIDEO IS GOING TO BE POPULAR. NEXT TRY DULE INPUTS AND .8OHMS OR .5OHMS I BET IT CAN HANDLE THAT AND WHO KNOWS HOW MANY CERTIFIED WATTS THAT WILL PUT OUT 4500 RMS WHO KNOWS SO FOR ALL THAT DIDNT THINK THIS AFFORADABLE KOREAN AMP COULDN'T DO RATED YOU GUESSED WRONG. THANKS FACEKICKER FOR TRYING THIS AMP FIRST😀
You're very welcome!
Dual inputs won't fit due to the angled inputs and screws the amp uses. I still have it hooked up and may hit it with .5 or .8 dynamic on Monday.
@@Facekicker thanks for this video. I can't wait to see if it can handle .5 ohms because I have 2 dule 2 ohms soundqubed 18s and would need a .5 load for this to work for my setup. One more thing you should show the amp features next time and a close up look at the hookups.
@@Facekicker I've seen some angled dual inputs made by ILL Customs that will fix the stupid angled inputs on the amp and straighten everything out. I'm sure you wouldn't get them in time to use them for this particular amp, but they may be useful in the future to fix this kind of thing. It's probably worth the $19 they cost in aluminum. Not sure if they make a copper version.
The way their input screws are angled it will prevent them from making good contact on any solid inputs. No solid inputs will work.
@@Facekicker well than maybe try a 0 gauge to a 0 gauge distubution block 1 0 to the amp and 2 0 output to your power supply. Not sure if that would work? If not just use the thickest wire you can find.
Sweet I been waiting on someone to dyno these amps.
How long will it last?
You should Dyno the new wolfram O series amplifiers when they come out. I have the 5k on pre-order right now.
I can do that
I'm in on the 5k preorder 👍
I got the 2400 on pre order hopefully we get them by next month
@@Facekicker has the Wolfram arrived yet? Was looking at their amps last night but I'm not sure if I want to make a purchase on a product with an unknown eta. Though they are offering nice prices for those willing to wait.
@@itdoesntmatterwhatyourname6128 Still Waiting
I bought this amp weeks ago and been running it couple weeks I love it and knew it would do pretty well
BASSN SANE not a big deal but the Facebook group they asked what people thought results would be and everyone was hating on it and for the price of 349 4900 watts dynamic is pretty good
How is it holding up im either ordering this amp or vfl 3k in the next 24 hours?
John Doe it’s doing great got it at 1 ohm pushing 4 Skar evl 12s buy this amp you won’t be disappointed 😁
@@BeaverModz i just ordered it!👋👋
John Doe nice you will be happy with it 😁
WTF why is there a volt meter that is not even calibrated correctly damn :D LOL rockville as a company try so so hard to fail faster :D LOLOL But I am doing just fine with my Twisted Sounds 3.5kw amp :)
This amp took my 2 15 audiopipes bd4 down😢 now going with skar 2 15
That's what i want to hear! Ordering one tonight
What did you have the ohm wired down to?
I ordered one yesterday for two bd4 the newer 12s 😂🤣 guess they’re going down lol
Just to report back I blew two 12 bd4s on this the new red and black models!! I should’ve used that limiter switch 😠😡🤬
Hell yeah! New sub here. Loving your channel. Keep up the great content.
Think this sold me. I’m doing 4 NVX 15’s in a wall, 750w RMS each, this amp is perfect for that. Gotta get that second alt installed soon.
They're hard to find these days but they are definitely good amps
@@DTW-bx2vy No. VSW.
Wwwoow am impressed...thanks for the video upload..
I'm blown away!!! I thought it would make 1300-1500 watts at best!!
WOW!! ITS ABOUT TIME ROCKVILLE MADE GOOD AMPS.
It wont last. Can you say smoke at 1 ohm.
Rockville has always made good amps, name the one that didn't do rated, i can its the db16 it came 100 watts under
And they last been bangin rockville amps and subs for 4 years no problems
Rockville amps are great in general. They sound amazing. The power is good but the sound quality is really stunning. It's because the mosfets they use are actually for making music.
Enyone that's interested in this amp go check out Jay's So Low It Hertz. He used to have 1 Rockville DBcomp5 on 2 18" Soundqubed HDX3s!!
Thats awesome about to they put out something worth a damn. There rockville destroyer is another story lol. But too bad they didn't come out with this sooner. I might have sprung for this over my orion HCCA5000.1 and saved $400 lol
Wow. Thats On Par For Taramps Cost Per Watt But It's A Korean Amp? This Is Actually A Pretty Good Budget Amp. It Might Be Really Bad On Efficiency Tho So Your Gonna Be Paying More On Ur Electrical To Power It.
You should try .5 ohm just for kicks and see if she survives and the power it puts out
That dang volt meter irks me but I'll be dammed if everything else wasn't impressive. Thanks for testing this thing, I've been looking to see what it can do.
I am pleasantly surprised i may actually buy one.
Great video and thank you for doing this dyno. I took a chance on the amp and now I'm happy with my purchase.
Will the dBcomp4 amp really put out 3000 watts rms?
What subs do you recommend for the db comp4
NICE!!!
Nothing wrong with that
Technically one thing, the volt meter ;D
Who do I contact in order to build me a custom single sub enclosure?
support@jonessubwoofersolutions.com
Yea but it’s dirty power
Explain
@@Facekicker Rockville is garbage as a company, let’s get that out there right now. I’m not sure u should be doing amp dyno videos if u don’t know what dirty power is
Help me learn ...
How does an amp make dirty power but still show rated power on the dyno?
@@Facekicker rated and dirty are two different topics, while yes it’ll put out rated if powered correctly, the signal won’t be clean and crisp, due to the lack of quality. the output filtration is very poor as well as many of the other generic circuitry. I’m no audio expert I’m just an audio enthusiast, but I know piss poor quality when I see it. And the brand alone disgust me because of their subwoofers and the fact they lied about them
@@younginfamou6053 the dyno test itself stops at 1% distortion on certified and stops at clipping on uncertified.
It's not possible to complete a run on the AD-1 with "dirty" signal.
Thus, the results in the video are clean power.
Why no internal shot :(
It is possible that the amplifier is internally regulated and the voltmeter is after the regulation circuitry.
Nah fam
The meter is just wrong
I figured it out a while back the volt meter is pulling off of the remote turn on if you have a relay going from battery to remote turn on it fixes the issue
@@willwilliams9237 that sounds like you're onto something. I've since switched to a relay on my bench for different reasons but that very well could have been what happened to me. My head unit was not putting equal remote voltage out as it was receiving, about a full volt lower.
can you believe Lucas has tested every amp ive ever heard of from Rockville
Do a run at .5 ohm. Or does it say it can't do .5 ?
It's not rated for operation under 1 ohm
@@Facekicker yet lol
Im gonna need you to run this amp at .5 ohm plz i just need a quick dynamic burp test nothing crazy just wanna see how the new Rockville would keep up
probably not great its a cheap amp. if youre trying to run .5 ohms get a better amp or just get an amp that does the power you want at rate ohm load
@@haydenwiseman3056 no problems i have mine at half ohm. Great amp the guts are pretty well built like a Korean amp
I run at half ohm and guts pretty well built like korean amp
Hey this is pretty awesome!
I have the orion xtr2500 but this amp looks good
I love the box i got from you its amazing
My baby still going strong after two years no issues at ALL power for days
What's your charging/ electrical in your ride
@@johnnytokes1 factory 160 amp alt trailblazer 1 extra xs d3100
Nice thank for your reply I have about the same adding in a small 16ah headway befor I put this rockvill in
Was wondering if you could review the Rockville RXH-F5 5 3200 watt 5 channel amp. I own this amp and really like it. Would like to know if it actually delivers on performance. No one has ever reviewed this amp as I have looked all over UA-cam and other sources.
I bought 2db16s gonna get the com5 now.dam!!!!!
Your vids are greatly appreciated.
I love all your videos. Keep up the good work😊
Thank you much!
I'll take an educated guess and say the DBComp4 and DBComp5 use the same power supply section and the DBComp5 just has one or more output devices. If this is the case, the DBComp4 may be more reliable as the power supply would be just a little less stressed. I have used 2 Rockville amps for over 3 years without issues and I might be lucky. Still very pleased with them. I ordered the DBComp4 based on this. I also believe and hope Cadence is still producing Rockville Amps. 30 years car audio experience and was a Cadence dealer for several years back around 2010. The Rockville amp manuals and the Cadence amp manuals are almost verbatim on certain models.
I ordered some 6.5s from them. Boxes were fine and even the Rockville boxes were fine but speakers were crushed all up that tells me they put them in the box like that from Rockville. Nahhh not again.
Try doing a amp dyno test of the rockvillEe rpa5 pro audio amplifier because I’m curious to know if their pro audio amplifiers can actually do their rated rms power.
i bought this amp for $350 and its now selling on amazon for $900+ why is that?
It's out of stock everywhere except a few 3rd party sellers who are asking that much
I have the DB comp 4 and I am not very impressed I wonder if it really puts out 3000 watts.
Impressive for a Rockville amp
It looks to be good but I just don't trust rockville 👍
Great video! I wonder as to it’s reliability
Just got it, runs at half ohm no problem so far
Going to buy one soon
Was hoping you would 've shown the guts. Nice vid👍
How was the amps efficiency? And the amperage? Does the amp get warm/hot while resting?
Just a few questions I’d like to know. I’m actually impressed, and you’ve got a new subscriber!
I didnt clamp the current, but that's something I'll likely try to cover in upcoming videos. As far as heat, it didn't heat up on the dyno, and it's been in a build since the video was shot, kicking ass ever since with no heat issues. It really seems to be a solid amp.
I bought one a week after this video posted and its running just fine doesn't get hot. Its seems efficient but that just me talking afther i finnaly got sufficient power. Im working on alt so i can see what it really do I was staying above 13 until i lost a battery im waiting on Rockville to put more out next month so i can run 2 best amp above 1500 Watts I've ever owned
Also it has a voltage regulator switch on it and that my be why the voltage reads lower
I think their amps are decent. I have an rva-m2 hooked to a Skar SDR 12 in my work truck and it barely gets warm. I just wanted some decent sound in my daily driver without a big budget. I punish this setup daily and have had no issues. I can't say it is absolutely hitting its numbers but it certainly seems to be.
Their amps are great, it’s the subs that are iffy and that comes down to the supplier.
It can say 10k..how does it move the subs is the question..whats it sound like...ill bet crap,nice video
You will be surprised.
@@savikabudsuke8213 I've owned the amps..the db and phenom and neither impressed me..iv had the k9v2 in 10-12-and 15 and they are so so..my 15 at 700rms got stinky but not to shabby for music..the pair of k6 12s I had impressed me for the money...so I have hopes rockville is getting this ironed out...i have the 0 gauge wire in my durango and have had it for about 2 yrs..not bad....the components I got from them were sub par..tweeters couldn't handle power.
It says 3500
And did more, clean, on a certified test.
Clean power = clean power
You won't hear a difference vs another amp with the same certified results
Longevity is the only thing in question here
@@Facekicker nah...had the phenom m4 was suppose to be 2200rms not even close..couldnt move my 12s...swapped out to a memphis mc1000 and it was slamming...i hope rockville has fixed the issues..i think it can be a great budget performing company...but they have a shit record to overcome..
@@MyBlowncobra because the M4 was grossly overrated, your other amp almost certainly made more power and that's the difference you heard.
So why if this amp is advertised with a rating at 1 ohm does it come with a paper saying its 2 ohm stable and not to wire it under 1.5 ohm?
The manual with mine clearly shows a 1 ohm minimum impedance, nothing says not to wire under 1.5.
I take it you ran your test with battery chargers on. Cause for 3k power sure doesnt drain your batteries like other amps.
They were on, but I mean this is only 3k.
So, those Rockville amps are Korean built? is it only the monoblocks, or the 4 channels too? And, does anyone know what the SQ is on the 4 channels amps?
good review! it is a good looking amp and impressive!
Black tape over the volt meter is what I'm gonna do I have a stinger volt meter already
I'm glad we snagged it, it performed extremely well yesterday on mediocre electrical! Thanks Jason
How many amps does it pull at 1ohm
What Rockville amplifier didn't do rated?
What size speaker gauge can this hold
10g, maybe some 8g
4 Guage. The dbcomp4 and 5 both can run 4g speaker wire. I'm doing it.
Volt meter is reading off the remote input i put a relay on mine and it reads dead on voltage
Good to know!
Very impressed I might look into this amp although it’s hard to part with my Rockford Fosgate system. My new goal though is to build a high efficient system with less dollars
Just to see all the new hype is with all the new products. I’m old school so we’ll see.
Thanks great job.
Had the comp4 but never hooked it up. Excited to get this comp 5 to power my g2 genesys 10s.
Efficiency 1 ohm?
How do you know its a korean amp?
What subwoofers should I run with this amp?
Jones Subwoofer Solutions 300oz or 400oz
Is this amp 1 ohm compatible
Yes
Damn I’m thoroughly impressed
Me too just got mine and will be doing some half ohms test on my 2 d2voice coil Sounqubed 18s at half ohms O Yeah can't wait to hook it up.
Thanks for the video
For $350 shipped? Can’t beat that.
Loved the vid bro👍🏾u just got another subscriber✌🏾/ does anybody know who has these in stock right now?
GTFO, I didn't see THAT coming!!!!
We definitely were surprised as well!
I have a db12 on one Rockford P3d4-10 and am very happy. Seeing this, when I upgrade it'll be to the db comp series and a couple destroyers. I'm super impressed with that run on the dyno for sure. Didn't expect that at all.
Definitely surprised me
Hey man would you do an amp dyno of the power acoustik va1-10,000d just curious about what that amp puts out.
Big d wiz dyno that amp... Look it up on youtube
He did the dyno on the power acoustik eg1-10,000D not the va1-10,000D
Just subscribed because of this video. I got a question on the 1 ohm load did the amp get hot. And I haven't looked it up but is that based off of the hifonics and mb quart style amps it looks very similar to the inputs.
Rockville is a waste of money
Bice, could make more impact if they change the look a bit
way to go Rockville im convinced your brand has potential to improve
Yep could have been a 4k