Nissan Frontier: Front Wheel Bearing
Вставка
- Опубліковано 17 жов 2024
- I am sucking the gravy on this job! Front wheel bearing on a two wheel drive Nissan Frontier. They don't get much easier than this folks. -Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/...
The South Main Auto Amazon Store:
www.amazon.com...
AES Wave Automotive Diagnostic Tools: www.aeswave.co...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained
*Impact used in this video: Ingersoll-Rand 232TGSL: amzn.to/2N5Eubf
*BiG NaStY: amzn.to/2toFyOm
* Astro Tools: amzn.to/2tlCthY
You sound like the guy from the Red Green show lol.
@@TonyM-zi9rq He does doesn't he? I'm surprised anyone remembers that show. They use to air that show on PBS back when I was a teenager.
@@twn5858 I'm 49 and had never watched the show until my Dad last year when he mentioned it before he passed. But yeah he sure does lol.
Got an idea, when you use electric cleaner, have a old dialup modem sound effect for the videos.
If you made a grey tshirt with big nasty in the center that said south main auto around it, id buy it
That looked refreshingly straightforward compared to some of the others you've done.
I did not expect to see you here. Hello, sir!
Yep clive but had it been a ford or a VW the torx heads of the bolts would have been all rusted out. Hours of fun for the family is what that is.
Big Clive in the house !
This is how smoothly I always picture my jobs going. I usually prove myself wrong.
No doubt had a simple brake job, end links job turn into a 4 hr ordeal last week. Or spent 2hrs beating out a kingpin today.
Using Big Nasty for the wiring removal!!! LOVE IT!!
XXX
it was like "Pew" and it broke
Yep!
That made my evening!
I've watched several vids for a Nissan Xterra wheel bearing and they all showed the version with the drive axle I found yours and it was the same hub as the one I had for my Xterra. I jacked the car up and it was a cinch. I used hand tools and it still was easy, except for that plug. thank you
my next project is the wheel bearing on my 05 Subaru Forrester
Thanks Eric for allowing us to look over your shoulder and learn from a real professional. Your skill and integrity are always evident in your videos.
I see all the rust on the cars you work on and it reminds me how lucky we are in the south. I bought a 1987 BMW 325i for autocrossing and it had zero rust on it. If that thing were a New York car it would have been to the crusher many years ago.
It's nice to hear it as it is. You prove every auto repair you perform. that's why I like your channel. I could care less about the money or perks. You are a genuine mechanic with a fathers background to prove it!
Finally I can agree with you when you say "If I can do it you can do it" No special tools required so I think I could do that job.
*PERFECT* Valentine's day for me. Wife is out of town, No kids, T-Bone steak for dinner, ❤BiG NaStY❤ and ❤New Brake Cleaner Fire Hose❤ on this gravy repair video. ❤❤ BEST Valentine's Day EVER! ❤❤
7 Days To Die YEAH BUDDY you forgot the beer.
@@robc5955 Would LOVE a beer , however a recovering alcoholic, 9 months sober. Enjoy yourself.
7 Days To Die YEAH BUDDY Good for you! Congratulations on getting sober, keep up the great work!
7 Days To Die YEAH BUDDY ooops not like me to put me size 10s in it, sorry my friend, well done on the abstinence - nice coffee then.
@@robc5955 It was a perfect day with or without a beer. Cheers
That appeared to be the easiest wheel bearing I've seen you change.
Back when I was a kid, you just undid the spindle nut and popped the bearings out. Getting the race out was the hard part. But bearings were made to be repacked, and rarely failed.
Thanks for the video. Just did my driver's front bearing on my 2WD. I couldn't fit my impact behind the hub, but maybe I didn't turn the wheel enough. It was easier than I thought to use a breaker bar on the hub bolts and caliper torque member bolts. Got the speed sensor clip off with a small needle nose squeezing from the very top. To bust the hub loose I hammered from behind the hub on the rear side (caliper side) of the control arms, but the other side is blocked by the dust plate. I ended up hammering on a 6" or 9" extension against the back of the hub through the sensor cable hole of the dust plate to get it loosen up.
I wish you were in my town; I would instantly apply at your shop for an apprentice. Learn from the master. But I guess this is the next best thing.
“AND HE WRITES” Love your vijayos, and love the New York Patina! You’re awesome and keep up the good work, “LOVE ALWAYS”
As a DIY'er I too have spent longer on connectors than the main job on various repairs. It can be incredibly frustrating. I think there should be a web site devoted to how to undo all the different kinds of connectors on different brands of vehicles. It could be a wiki, where everyone contributes. I think that web site would have tons of traffic if word got out that it existed!
Another great video, happy to see a frontier video, tho I might be a little biased being a frontier owner. Being an Okie it blows my mind how much rust you have to deal with.
Thanks for the video. Mrs 05 frontier started making really bad sounds when turning, got it pretty much nailed down to the front wheel hub/bearing. This video helped a ton.
Eric, I was waiting for the air hammer. This tool works. I align cars with this. Frozen tie rod nuts. I cheat, it's how I bust tie rod ends and ball joints. Carefully.
I've been using the CRC green (non chlorinated) for years... Never had a can spray like that! Im lucky if half the cans in the case even have nozzles.
Rant over, awesome video once again!
It's apparently PowerSquirt technology or something
This helped...big time! Had to perform both right and left hub bearing replacement and while I was in there replaced both shock struts - the old fationed way. Removing the spring from the old struts.
Anyway your video helped me save well over $1000.00 dollars.
It's truly amazing the mark-up on this kind of service. Thanks again! 😊
Keep up the great videos, you're making a positive impact, and that's commendable. 👌
Good 'ol Nissan Fontier. I had a lot of trouble undoing that same clip on mine when I was installing the lift kit. Seeing you struggle with it makes me feel better about it.
I have watched a hundred of your videos and if I ever own my own shop I would have my big nasty but every time I used it I would have to Blair that music you are the man
Love when Eric says, "Napa...not a sponsor!" Not sure why but it makes me chuckle every time.
Those new CRC cans are pretty sweet! Only sprays for 10 seconds but bet your bottom dollar whatever's on the business end will be clean.
SMA is my valentine cause I love this channel
I really enjoy the videos with air tools over the electric ones.
Eric O with the noisy bearing! It's rare that I get any shaky bearings in the shop. They're usually just noisy with no play. I hate those...
Had a similar issue on mine; noisy as anything, but no play, and no noise with the car in the air and no load on the bearing. A set of chassis ears clipped on each bearing carrier and a quick test drive soon pinpointed the culprit. When stripping the bearing down, there were two massive divots in the ballrace. Probably thanks to all them winter potholes.
ya mine are always pretty tight but noisy as hell!!
The brake clean looks like a friggin’ firehose!
I don't think it'll extinguish fires.
You can spray a vehicle across the shop!
anti chuckle I’ll give it a shot and report back.🤕
My thoughts exactly. I've never seen a can of brake clean shoot like that before. Wonder if it's a sales strategy? Oh well as long as it works. Happy belated Valentine's day to you Eric and Mrs O.
Just got to that part. Holy hell it is a fire hose.
Glad I'm not the only one you had a fit getting that wheel speed sensor unplugged. Took me longer to get that unplugged without breaking it then to replace the hub.
Not that I don't appreciate the scantool/diagnostics vidoes but I like this sort of videos better.
I've just sat down with cuppa and sandwich to watch a professional at work. It looks like another day at the office for Mr. Eric O. But as always a great vid and thanks for the great entertainment. Stevie K
You cut the ABS wire like a BOSS
Yeah, how many times have others been let down by leaving your comments & criticisms? It's all about the Advertisement money now Eric. Sure, you're going to have a criticism about what I say. Charging more money then you know what to do with is bullshit. You want to impress me? Give every single dollar back to your community. I think you are about the man who would do this. You still have my support. Eric, you don't require all these other shogun auto repair guys showing you anything. You are the best I've ever seen! I mean that! You and Mr's O love people and that is evertything!
Doing a wheel bearing on mine tomorrow. Watching this to get psyched up for the job,. Don't have the benefit of a big nasty so probably gonna take a liiiiitle bit longer...
@@DontCryAboutIt love the bfh
Grab a second... two BFH always better than one
Slide hammer works good as well most times. Most big parts houses have a loaner.
Followed your video, got my new wheel bearing installed without problem. Thank you Sir !
Nice and early to watch Eric O show his masterful ways of dealing with cars.
You are the fastest air gunner in the East!
Looking at the suspension parts in general but specifically the lower spring plate on the strut. I would have to ask " Where the Flake did my truck go ? " Nice job.
Big Nasty and CRC brake clean make the world go around. Beautiful video!
thats such a great way to loosen those hubs from the knuckle. i've done this once and had to use the ratchet extension and the steering rack press trick.
13 minutes real-time people this guy is good 👍👍
I'm almost disappointed that bearing didn't put up more of a fight. lol. Thanks Eric!
Awesome. That new brake clean has got some serious power.
I like how you handled the abs sensor. keeping it real
SInce watching your videos I have bought one of those wond lights and a chinese copy of big nasty, both very good tools. I am so jealous of how many tools I see in American workshops that we dont have here in the UK!
I was surprised to see the unit comes with the ABS sensor!
Love those modular hubs. Hate replacing old school bearings. Four bolts and a toot of brake clean is the way to go.
Fantastic sat at home 🏡 on my settee watching Eric O fixing motors lol 😆 Added bonus brake cleaner 👍🏻🇬🇧
I seen you in a magazine at my work and I’m all the way in Alabama keep up the amazing work brother
That was sucking some gravy! I bet you don't see many rear wheel drive only trucks up there. It's pretty rare to see one here in Pittsburgh.
You make the most awesome video's for all of us in youtube land to enjoy. And that's a fact Jack or Jane depending well we will just leave it at that.
I sure would like to see Ginger Lee. She gets around a lot! The girls been in Mustie’s and Aimese’s place , too.
There is no limit to the number of right uses for the wrong tool.
That move at 2:30 was just pro.
I bought those wizzy wheels you demo’d on another video .. awesome .. they’re also great for scraping paint/prep for painting the house too.
The job that took you about 10 minutes would take this DIY’er about 3 hours.... Very impressive. I never would have thought to remove the entire caliper assembly at once. Now I will....
Love the smell of Fluid Film! I spray it on my biscuits and gravy. lol.
Surprised it didn't shimmy itself to death. Good work man. You have the same discipline that my father taught me when it comes to doing a good complete job and taking care to do it right! I don't trust nobody to touch anything on my ride but if I was dying, I would trust you with it...well, yeah, well ok. Just you though.
Cool video thanks now I see what’s Involved in changing them from Byrnes thank you a lot
Hose pliers are the bomb.
You need a sheep sound for Fluid Film. (lanolin)
Bahah, not really.
I second this. A short "Bahhhh" would be hilarious
I thought of using a heated (hot laquer) sprayer with melted beeswax.
I think a brief 'chorus of angels' might be a better audio cue for the saving grace embodied by Fluid Film.
Myth. It's refined petroleum: ihiqa2kjxfb4dhp9872la1cm-wpengine.netdna-ssl.com/wp-content/uploads/2016/07/SDS_Aerosol.pdf
Best viewing angle of all. 👍
My old big 1.9 had the same problem. Isuzu.
Super fast hands on grinding!
Crappy sounding piece of plastic/sheet metal!
If ONLY we could move you and the girls down to Odessa, Tx., you'd be richer by now!!
Get videos! Keep it going..
Been watching every day for months now. Every day I kearn something, If it would get cold enough here in SC I'd order a sweat shirt from ya! Lol!
Just finished a Right front Hub, Caliper and Hose replacement on a 2003 Explorer. What an adventure that was. But as it is a souther vehicle, NO CANCER!!!! Lulz!
Eric, is it just me or could that have used new ball joint and tie rod end? It seamed to me there was still a lot of movement in that tire.
I admit when he said go to go. I backed it up to watch again and still went ummm looks like still got lots of play
Hello Mrs. O Hope Mr, O Take you out to a Nice place for Dinner...Happy Valentines Day..
You remind me of my dad replacing vehicle stuff 👍🏼
Glad to see I'm not the only one who struggles with electrical connectors! 😁
Glad to see you back at it I learned a lot from your video.
Now that's entertainment! Happy Valentines Day to you and the lovely Misses O. But what do you get a girl who already gets all the brake cleaner and donuts she wants?
Ice Cream
The bucket might be empty by the time she got it. Mysteriously sucked dry by some unknown creature on the way back from the store.
If only there was a mechanic like you in northern California.
Thanks for the new video. I hardly ever watch tv anymore
Done. You make it look easy Eric.
The Big Nasty & The Air Compressor!!!! Awesome video!!!
That Brakleen "PowerJet Technology" they weren't kidding!!
That was a beauty! Thanks for the new "Fire Hydrant" brake cleaner. Hope she makes more appearances! lol
Brad V
I may be doing just that. With all the rain we're having, and doing this at home, I'll check it soon.
Another excellent video Eric!
Congrats! Finally a job that didn't consist of you fighting the rust for hours on end until you are completely exhausted and screaming Yo Adrian. Hopefully you made a few pennies on this one. Nice eyes and ears for the Big Nasty! Safety third. I saw Fluid Film in a Lowes in San Diego. What? Rust and mosquitoes don't exist here. Why do we need Fluid Film here? I don't need a Big Nasty, but I really want to get one from your Amazon store, because it is awesome. One day I will...after I get a few Nano's. Stay classy Dr. O & Mrs. O & the little O's.
This ones easy compared to a GMC Canyon where the rotors have 8 bolts and hub 4 more on backside. Had to take whole spindle off and axle just to get the badly rotted bolts out with oxy torch. Nice job!!
Eric O, you make it look so easy, nice job. Need to go and buy a supply of Break Clean.
I changed one of those on my car cause a seal failed and even after just a few years I still had to beat it off with a 5 lb. hammer. Amazing how fast things rust and corrode in the northeast.
Eric O. Quote of the day "Two-Wheeler Peelers"; I love it :)
The big 2.4 lol! Loving Big Nasty's soundtrack.
Eric O and his entertaining style goes hog wild w the torque bar.
I recently bought my own "Big Nasty" to use here on the farm... My daughter saw the box and wanted to know what is in it.. .. told her it was an air hammer... as I opened it up.. told her it had a nickname ":Big Nasty" her eyes got big... and she said " I call it Big Beast" .. .. yeah I almost cried .. oh and she is 10 !
I love the way you add the perfect music for the scene not only educational but entertaining too lol. The big nasty would have taken care of the connector 😏
Excellent work Eric.
Eric good one for the blow torch. Thanks for the video.❤️️
I bought some of that Fluid Film for the first time and I see what you mean about lovin' the smell of that stuff. Thanks Eric!!
Pretty simple job there Eric,nice to see some gravy once and a while eh
Wow, Super Brake Clean!
Okay,I’ll ask again,WHO gives a thumbs down on an SMA video!?
another awesome job by Mr O
Man, that ball joint looked f'd. Seemed like alot of wiggle at the end too.
thanks again, wish it had of been a 4 wheel drive since I have this to do on my Nissan....I just know it isnt going to be this easy...Bob
Dam that spray cleaner was at warp 9 :-D
That bearing didn't stand a chance against you lol.
infinitely more productive than ASMR videos
I'm a big fan of Break Clean and love watching Big NaStY take care of business. Turn it up Eric
At the start of the video you wiggled the tire, as if that helped understand the problem, but when completed you wiggled the tire again. So is that the sign, or is there some other issue? Thanks for video info. Taking off the ABS plug drove me crazy, like you mentioned.
Can't wait for that astro prototype to be released. Looks/sounds like a beast. I had the IR one before. It was decent, but couldn't touch brake caliper bracket bolts. This one sounds like it may have some power