Good video, but you had the CV joint and half shaft removed. It's a much different story when that's still installed. Can't get the lower pin out of the knuckle without removing it. Still scratching my head. Hopefully, removing the lower part of the strut will get me what I need.
![How to change a front wheel bearing and ABS sensor on OPEL VIVARO A Van [AUTODOC TUTORIAL]](http://i.ytimg.com/vi/i8Qp6_iuUjg/mqdefault.jpg)
Good stiff! Thank you! Doing my lowers tomorrow. This is just what I needed!
Brakes should come off as ONE part not Calibers, then brake pads. If you take the brake pads off the calibers will stay in places with the pads.
How did you pull the lower ball joint back??
Una pregunta primo y para cambiar las rotulas inferior de una nissan frontier 4x4 2000 es los mismos pasos? Gracias
Simon
Hey, what is the part number to the pitman arm puller that you used to seperate the knuckle from the lower control arm ball joint? Thanks in advance.
they have one at oriellys i rented. It bottoms out then i put a socket in for a spacer to finish it off
Why remove the track rod?
Helpful video. Thank you Sir!
Good video, but you had the CV joint and half shaft removed. It's a much different story when that's still installed. Can't get the lower pin out of the knuckle without removing it. Still scratching my head. Hopefully, removing the lower part of the strut will get me what I need.
Tom Grantonic it's easy just be patient
Todo ese trabajo como se llama
Good video man! Going to replace lower ball joint on my 2006 Nissan Xterra. Thank you!
ussir thank you for watching my video and I'm glad that my video will help you to replace your lower ball joint on your car.
What is the name of the tool used for to pop out balljoint from the spindle ? Thx
matco ball joint super set mst6530
Great work man you got it all out. Good video thank you I'll change my lower ball joints as well
Thanks man for your comment
Did you take axle off ? My frontier same but I didn’t see your axle ?
Mine was two wheel drive no axle, yours probably 4x4
Yes , thank you
Good videos ! 👍🏻
thanks man
You're welcome :)
Yep ty. It helped
Saludos
You can tell he doesn't live here in New England with the road salt. I am in the middle of this job, and it is nothing like this!
I’m in the middle of this job right now. MF-ing everything that requires separation 😂.
Hey man what kind of ratchet was that super long one?
snap on
great video, can I ask why you had to replace the ball joints and shocks? was the alignment bad?
Scarface Pnut bad ball joints and bad shocks
Its also recommended to change them after so many miles.
i would assume because the parts were installed 12 years before this video lol
bonne video,merci
😉😁👍
wow what a job, I couldnt do all that
😴