M-Class Solar Flare on June 8, 2024 01:55UTC
Вставка
- Опубліковано 25 сер 2024
- #hamradio #propagation #hamclock #solarflare
Two days after an M-Class flare that peaked at M6.0, a stronger flare erupted. It takes 8 minutes for the effect to reach Earth. I tracked the flare’s X-Ray value using the Ham Clock software. I was able to monitor the intensity of the flare as it continued to rise. M is a medium flare. It can adversely affect HF communications in the 3-30MHz range for 10-60 minutes. Watch the video to see how high the X-ray flux valued reached.
If you are interested in purchasing the HF Clock, here is a link: www.veritiumhfclock.com. I recommend the Raspberry Pi version. The ESP (Wooden) units are slow and have limited functionality.
If you only want the software, it is called Ham Clock. Here is a link that shows how to install it free on a PC: w4cae.com/wait...
There is an inexpensive Inovato Quadra computer bundle that comes with the software installed. As I write this, the bundle only costs $50. It is available from: www.inovato.com
Note: Ham Clock version 3.03 included significant changes related to the DX clusters. Prior to 3.03, every single spot from the cluster to the clock resulted in the clock sending a show/heading command which a very vocal minority of dxcluster sysops objected to. From 3.03 onwards, the heading calculations are done locally to take the stress off of the remote cluster. For versions after 3.03, the clock puts no more load on the dxcluster network than any other user does which is a good thing. However, the local CPU load is now very high for the ESP version of the HF Clock. Users of the ESP version of the HF Clock will notice a loss of the ability to tap a callsign in the DX cluster and see the short path plot, beam heading, DX WX, and VOACAP data for the station you clicked on. The processor in the HF Clock is just not powerful enough to keep up with the new programming that was required to minimize the load on the DX cluster servers.
Below is a list of reliable DX cluster hosts I have found:
Note: If you leave the Login field blank, it will use the callsign you entered in the setup menu. If you have more than one instance of Ham Clock running, use your callsign-1, callsign-2, callsign-3, etc., so the clusters don’t block you for logging in too many times with the same callsign.
port: 7300
host: mayodx.ath.cx
login:
or
port: 7300
host: g6nhu.getmyip.com
login:
or
port: 7300
host: dxc.w1nr.net
login:
Note: G6NHU created a new node that is optimized for Ham Clock version 3.03 or newer. For more information click this link: qso365.co.uk/g...
port: 7300
host: dxspider.co.uk
login:
At the end of this video, you will be able to see a listing of some of the supporters of this channel who made this video possible. These are people who have supported the channel via Patreon membership, as what I call long-haulers. Long-haulers have supported the channel on a long-term basis. There are 4 levels of Patreon membership, including S5 (Associate), S7 (Executive), S9 (VIP), and S9+ (VIP+). S9+ (VIP+) denotes an S9 (VIP) member who voluntarily chooses to give over and above the amount for S9 (VIP) membership. They help me continue to produce videos even though most people do not contribute toward the cost of my mission. Without their support, I cannot bring my viewers uncensored content.
I hope you enjoy this video and find it helpful. If you find my channel informative and entertaining, I hope you will consider joining my support group by clicking on: www.patreon.com/N4HNH There are 3 levels of support, including exclusive content. Visibility of premium content is determined by the level of membership you choose. The higher the membership level, the more content you have access to. VIP members are invited to participate in periodic Zoom meetings.
Most videos are visible to the Patreon team members long before they are released for public viewing. Some videos are never released for public viewing. Yearly S7 (Executive) and S9 (VIP) members have access to the menu optimizations PDFs I’ve written for the FT-891, FT-991A, FTdx5000MP, FTdx101D/MP, FTdx10, and FT-710 AESS. Yearly S7 (Executive) members can receive one menu optimizations PDF while yearly S9 (VIP) members can receive multiple menu optimizations documents, plus my FT8 configuration guide for either the FTdx10 or the FT-710 AESS. Future radios might be added. The documents are copyrighted. They shall not be divulged to anyone else without written permission from Doug McAlexander, callsign N4HNH.
N4HNH Radio has a Web site where you can purchase T-shirts with some of the sayings you might hear in the videos. Some of the more prominent videos are featured there as well as a page geared toward ham radio training. Go to: www.n4hnhradio...
Other ways to help support this channel are to click like and subscribe, and watch the video to the end.
73, de N4HNH
Thank you, Doug.
Thank you for helping keep the channel going, Wendell!
Thanks Doug.
You’re very welcome, Jim.
I don't know why the algorithm showed this to me, but it seems very interesting! It feels weird being able to listen to all of this... as if I encountered a secret video from the government (because of all the code names, i have no clue why everybody on this channel including viewers has one in what looks like the same format). It just looks like its own small community of VERY dedicated people, which is awesome.
We are definitely a small dedicated community. The main focus is practical operating tips.
cool screen - is that custom or can you buy those ?
The self-contained unit is the ESP unit from Veritium. It isn’t full featured but displays what I want to see on it. I have the Inovato Quadra and another version running on my PC. They are both fully functional. Details are in the video description. I assume by your question that you didn’t read the description. If you watch all the videos in the Radio Wave Propagation playlist you will have opportunities to see all three of my Ham Clocks in action.
Interesting, no wonder 11M has been open. Can't say the same for the lower frequencies.
Solar flares affect all of HF. It doesn’t mean there is no propagation. It’s just limited. 40m will usually work to some extent even during a flare. I consider 40 meters as the most reliable HF band.
Do you think it's possible to get this working on an ESP32-2432S028R? Maybe have it cycle through screens rather than having all of them on the same screen?
I doubt it. But you can program the various panes to cycle through different data. Veritium sells the ESP unit I have. You could ask them.