How to change fuel pump on a Alfa Romeo 159 (2011) 2.0 JTDM 170Hp
Вставка
- Опубліковано 19 гру 2024
- WATCH ALL THE VIDEO TUTORIALS BELOW : ON A ALFA ROMEO 159 (2011) 2.0 JTDM 170 Hp
How to change air filter in your Alfa Romeo 159 (2011) 2.0 JTDM 170Hp
• How to change air filt...
How to change your cabin air filter in your Alfa Romeo 159 (2011) 2.0 JTDM 170 Hp
• How to change your cab...
How to replace oil filter on a Alfa Romeo 159 (2011) 2.0 JTDM 170 Hp
• How to replace oil fil...
How to Change Engine Oil on a Alfa Romeo 159 (2011) 2.0 JTDM 170 Hp
• How to Change Engine O...
How to replace fuel filter on a Alfa Romeo 159 (2011) 2.0 JTDM 170Hp
• How to replace fuel fi...
IF YOU LIKED THE VIDEO TUTORIAL AND IT WAS HELPFUL, SUBSCRIBE AND DON'T FORGET TO PUT A !!!!! LIKE !!!!!
Vezi in acest tutorial video, cum să înlocuiți pompa de combustibil (motorina), la un Alfa romeo 159 2.0 JTDM 170 Hp din anul 2011.
!!!ATENTIE IMPORTANT!!!!
RISCUL CA MOTRORUL dupa schimbarea pompei de combustibil la pornire SA NU PORNEASCA SAU SA FUNCTIONEZE CITEVA SECUNDE DUPA NU VA MAI PORNI.....
DE CE ?
Pentru ca prin schimbarea pompei de combustibil, intrerupem alimentarea cu combustibil a intregului sistem de alimentare..(din rezervor pina la motor).
Dupa completarea schimbarii pompei de combustibil veche cu cea noua, inainte de a porni motorul, pentru a completa, sistemul de alimentare cu combustibil unde a fost intrerupt prin schimbarea pompei, daca se dispune de un tester de autodiagnosticare se va face umplerea cu combustibil... fara un tester inainte de a porni motorul indicat... de pus DOAR CONTACTUL de 5...6 ori(pus contact luat contact ...5,6,7,8..ori, pentru a umple sistemul de alimentare cu combustibil).
Nota:
!!! ATENTIONARE !!!
Acest videoclip trebuie folosit doar în scop informativ și nu garantează obținerea vreunui rezultat specific. NU SUNT RESPONSABIL pentru orice lucrare efectuată necorespunzător pe vehicul dvs. Lucrările le efectuati pe PROPRIUL RISC. Dacă aveți vreo îndoială în legătură cu această reparație, vă rog să nu o efectuați și să mergeti la un service specializat.
Acest videoclip reprezintă doar metoda mea și poate că nu este corecta, prin urmare NU SUNT RESPONSABIL pentru acțiunile efectuate de dvs. VA MULTUMESC!!!
DACA TUTORIALUL VIDEO TI-A PLACUT SI TI-A FOST DE FOLOS, AJUTOR TE ROG INSCRIETE SI NU UITA SA PUI UN !!!!! LIKE !!!!!
Can this pump cause problems with starting the car? Since few months I have a funny problem when I start the car first time in the morning. It looks like it wants to go, fires one or two cylinders, but then I need to crank some more to finally make it start. Changed glow plugs, removed fuel leaks, changed fuel filter, the high pressure pump seals had been replaced, I put another set of injectors and same thing. The battery is new and fully charged, starter spins fast enough I suppose. I even checked engine compression and it's over 30 bar all across the board. Last two things I suspect are the camshaft position sensor (but no errors in ECU) and the electric fuel pump in the tank itself.
Hi, you've done a lot of testing... very good, I have no idea what it could be. In the car in the video tutorial the engine didn't start at all... If you can understand why it doesn't work, leave a comment here... Thanks
I have the same issue with my alfa 159 2.0 jtdm, I have changed glow plugs, starter motor, battery....but no results, the car start just with the starter spray.
I have noticed that I have just 120 bar of fuel pressure during the cranking
check my video troubleshooting about 159 won't start, I explain some solutions about this issue
@@giorgiocandelo1598 I saw the tutorial video, I'm glad you finally managed to figure it out🍻
Is there any particular way the rubber ring has to be placed? I had to change the oil pump in my TBI but I cannot put the metal ring on and seal the whole pump. The rubber seems to be too thick or too big now. How is it possible? I tried to push the pump and the metal ring all the way down, together with my colleague but still the metal ring does not want to get under the metal "teeth". Without rubber everything goes smoothly but ofc I cannot drive without it. I also tried to boil the rubber to make it soft but still nothing. I dont know what to do and new rubber rings are impossible to buy, at least for petrol.
Hi, I struggled too, the sealing gasket must be put exactly on the channel together with the new pump and closed with the metal ring .... did you manage to mount everything in place?
How did you diagnose that it is the fuel pump? Did you start with the diesel filter first?
Hello, the diesel filter has been replaced, the fuel pump does not work properly as symptoms of difficulty starting the car, sudden engine stoppage, power reduction...
How does he hit the same direction (clockwise) to undo the locking ring, and then taps the same way to instal it again
Hello, you have eagle eyes🙂... good observation, I didn't film the disassembly of the metal ring and as information to give you an idea, I used the same portion of the metal ring assembly video when disassembling the metal ring
Sorry how can unlock the seat
Какая была причина замены насоса? Какие были симптомы?
The reason for the replacement was a pump failure which caused the car's engine to stall, it would not start again...
@@ciobotarubogdan9730 он резко перестал работать, или было и ранее что машина глохла но потом заводилась?
У тебя на этом насосе нормальный разгон был? Или машина еле разгонялась?
Merci beaucoup 🌝
You're welcome, I am glad that through the video tutorial you were able to help you ...
WATCH ALL THE VIDEO TUTORIALS BELOW : ON A ALFA ROMEO 159 (2011) 2.0 JTDM 170 Hp
How to change air filter in your Alfa Romeo 159 (2011) 2.0 JTDM 170Hp
ua-cam.com/video/gQ8Jbu1obCE/v-deo.html
How to change your cabin air filter in your Alfa Romeo 159 (2011) 2.0 JTDM 170 Hp
ua-cam.com/video/Y_8jtcgCmyE/v-deo.html
How to replace oil filter on a Alfa Romeo 159 (2011) 2.0 JTDM 170 Hp
ua-cam.com/video/fDFeNAVDGjQ/v-deo.html
How to Change Engine Oil on a Alfa Romeo 159 (2011) 2.0 JTDM 170 Hp
ua-cam.com/video/yoDRWNI0ybM/v-deo.html
How to replace fuel filter on a Alfa Romeo 159 (2011) 2.0 JTDM 170Hp
ua-cam.com/video/ru8omMB6CQQ/v-deo.html
How to change fuel pump on a Alfa Romeo 159 (2011) 2.0 JTDM 170Hp
ua-cam.com/video/oxPSQL0FJHM/v-deo.html
TO SEE ALL Alfa Romeo 159 VIDEO TUTORIALS IN THE TOP BAR
HOME VIDEO PLAYLIST COMMUNITY...
CHOOSE PLAYLIST CLICK ON Alfa Romeo 159 AND YOU WILL BE ABLE TO FOLLOW ALL TUTORIALS WITH ALFA ROMEO 159
IF YOU LIKED THE VIDEO TUTORIAL AND IT WAS HELPFUL, SUBSCRIBE AND DON'T FORGET TO PUT A !!!!! LIKE !!!!! THANKS FOR WATCHING
Did start right away 5:39
Very nice how i can relise the seet
Can you help me to unlock the seet
You need to pull from the front side. In the middle there are also 2 hooks that are released after pushing the seat towards the trunk
@@SinisterMKD thanks
Wow,domnul inginer! Da'...te pricepi, nu glumești
HAHAHA trebuie...
Why this simple pumps are so expensive and where to buy one at reasonable price not that I need one yet.
I don't understand why they have these costs either, try Autodoc
👍👍