Trailmanor: Microwave Electrical Receptacle Modification

In our Trailmanor we sit our little microwave on top of the removeable drawer unit. The problem is getting the drawer unit back in after the microwave (or anything else) is plugged into the receptacle.
Basically we removed the receptacle and swapped ends with it. To get a little extra slack in the wire, you may have to remove a wire clip that is screwed to the cabinet underneath. Then use the adapter plug I show and your problems are solved. Without swapping ends (turning it around) on the receptacle the pigtail I am showing will be pointed outward instead of towards the wall. We tried it that way but was not happy with the result. Turning the receptacle around is the trick!
This is my Amazon Associate Link to the adapter.
amzn.to/3g1s9YA

[@thecritterandthebutterfly]

Pretty slick idea to make that outlet useable. We did the same thing with a power strip with the 90 degree plug on it. As we built our own microwave drawer we could cut a small notch in the corner for the power strip cable and the power strip sits on the counter or top of the wall.

[@Flyboytr]

Excellent. I'm always happy to find a better way to make things simpler. A member posted a link to a short cable with a rotating head. That would have eliminated me having to shift the receptacle. Hope y'all are doing well.

[@t1d100]

Good solution!