Tenere 700 Black Widow Exhaust - Sound and Install
Вставка
- Опубліковано 10 гру 2022
- Install and sound comparison of the 300mm Black Widow Stainless Hex slip on silencer for the Yamaha Ténéré 700
#tenere700, #T7, #adventurebike, #blackwidow , #install, #yamaha, #diy, #exhaust, #ktm, #bmw, #triumph
Installed
Black Widow 300mm Hexagonal Brushed Stainless exhaust
Favorite Tools
T-handle allen wrenches- amzn.to/35FZBK3
Motion Pro t-handle -amzn.to/2Gx1HCz and amzn.to/2GFtelg
Tools and products every motorcyclist should have...
Maxima waterproof grease -amzn.to/2Ic8iiO
Honda chain lube/cleaner -amzn.to/2GjzAHK
The best spray polish ever made -amzn.to/2I98TBV
Purchasing from the above links pays a small commission to the channel but doesn't cost you any extra! Please help support MotoSouth and check out my other how to videos.
*Installation of critical components should be performed by a qualified mechanic. - Авто та транспорт
I'm running Arrows headers, custom mid-section, and a Chinese fake Akra with a K+N filter,and a 3D printed airbox lid on both my CP2 bikes,no ECU flash needed...night and day,and it doesn't cut out as with the standard exhaust...'21 model Tracer7, and '16 model XSR700
Hi! Nice job! What about the distance between muffler and the swingarm? Is it more or less like with the original muffler?
The silencer is narrower so there is more clearance
Hi, nice video... don't you need to add a new gasket after removing the original..? Or is that what the paste is for? Thanks.
The paste seals the connection between the two pipes. If you were replacing the header pipes, you would need to also replace the gaskets that go between the headers and the cylinder
No springs?
So I’m installing mine tomorrow how long did you have to wait? If at all, for the paste to settle? Thanks again for the video
I didn’t wait to run it. It looks like the heat hardens the paste and creates a seal. No leaks that I can see
@@MotoSouth yep did the install and running sweet thanks for the feedback :)
No problem. Ride safe 👍
Hi friend, I have a question, what model of panniers do you use?, thanks
The racks are from andystrapz.com and I have a pair of Tusk soft panniers mounted to a quick release plate from Giant Loop. I need to do a video on that setup one day soon. It’s really compact, holds a lot of gear, and is easy to remove when needed.
Hello I’m thinking of getting this exhaust for my world raid , can you tell me ..does it come with the link pipe or do you have to order it separately? Many thanks in advance
It does come with the link pipe but if you want the headers they are separate.
@@MotoSouth that’s great thank you …just seems a real bargain for something that looks so good and sounds like it does that’s all. Ill get my order in asap.
does the paste come with the exhaust? or did you buy that separately ?
It’s included with the exhaust
@@MotoSouth Thank you, getting a blackwidow for my yamaha ybr soon, just researching a bit as ive never installed one before
Just ordered the same for my WR.
How bad is it when touring WITH baffle in? Say anything over 65-70mph?
I normally ride with earplugs and honestly the wind noise is more bothersome than the sound of the exhaust which isn’t bad at all
@@MotoSouthgot it delivered and fitted. It’s fine with baffle, like it much more than stock. Rode it for an hour in town without a baffle though, that was just too loud for my liking. Had to ride with my mouth open!
@nemerkha I prefer it with the baffle. Just right
What size is the spark arrestor?
51mm
Does it came with homologation papers?
Not that I know of 🤷♂️
Amount of paste 😮
I've got it....
Omg.. the black rubber js so bad adjusted…
It had a tendency to misalign but it’s been fixed. You can sleep better tonight 😂
@@MotoSouth thanks god ! 😂😂
Don't make too much noise on towns . UK"S and on
Great Video . I order the same today . Do i need remapping with slip on ? Tenere 2022 model euro 5?
Not necessary for slip on
Thanks man 👍 when DB is Out ok too?
Yes. Only a full system would require remapping