Congratulations nice video thanks for sharing!!!! Resentlly i fix my own kayak using the bicycle wheel 's protection fins!!! Very desen way i make only a few modifications because these fins are already formed from the factory!!!
Man you did a good job on your kayak. I never thought about that but I think I need to do that to my kayak. I seen some scratches on the bottom too. Great video man. Thank you for sharing it.
One of the things that you should do is get yourself a j roller they're not that expensive they use them for laminate when they're putting down laminate on a substrate for cabinets or countertops and what's that j roller you can bear down and mash that glue that's on that keel guard right into the fiberglass of the boat or the plastic I did the same thing that you're doing right now on the front of my kayak then along the back where you got the gunnels where it's flat on the on the outside of the gunnels I put the 4-in wide pieces on the back so when you pull it up if it happens to hit the rocks it protects it in the back and I use that j roller if when before I put the j roller to it even though it was in the sun that heated it up with a heat gun just a little bit to make it more pliable and I put good pressure on it and I've been using it now since July and into the weather that we have now and I haven't had no problems with it or was it trying to peel or anything else Good video
I personally would not have painted it, because its all just going to get scratched off and look worse but love the wrap to protect bottom side like that.
Another excellent and helpful video. I was thinking about getting this product but I wonder, once it requires replacement how easy would it be to remove? It's hard plastic so I assume some careful sanding?
Hey Tyler. First of all, your videos are great! Spend a lot of time on your channel. Thank you. What do you think about the jb weld application for a keel guard? Seems like the cheapest application along with the most protective.
Excellent video as always. I saw you posted a picture of you fishing for albacore a few days back. Do you worry about the mercury content of tuna at all?
I do try and limit tuna intake across the year due to mercury. Thankfully the young Albacore Tuna off the Pacific Northwest coast do have not lived long enough to bioaccumulate the high mercury contents found in most commercially available tuna. Based on the mercury content in fish sampled off our coast by OSU and recommendations for mercury consumption by health officials I try and limit my intake to less than 8 oz per week across the year.
@@spiltmilt Oh wow I wasn't aware of that, but it makes sense since they are much smaller than their full grown, deep sea counter parts. How many days per week do you eat fish? It seems like you fish on a pretty regular basis so I'm just curious.
@Split Milt Production - How's this keel guard holding up? I have a new Big Water 132 that I've taken out once and now noticed a few scratches. Would like to see how your held up since the install. Verbiage description is good. Photo's would be helpful too. Thanks for your time and effort putting this together.
@@spiltmilt Oh good, didn't see it on the video. What about wiping with alcohol only to sand afterwards and then touching the surface with your hands and not cleaning the surface before applying the guard. Did you fix that too and not showing it in the video? Just wondering....
Congratulations nice video thanks for sharing!!!!
Resentlly i fix my own kayak using the bicycle wheel 's protection fins!!! Very desen way i make only a few modifications because these fins are already formed from the factory!!!
I ordered a "mini rolling pin" (3M) from amazon, to help smooth out the gator patch, when I apply it to my boat.
Man you did a good job on your kayak. I never thought about that but I think I need to do that to my kayak. I seen some scratches on the bottom too. Great video man. Thank you for sharing it.
One of the things that you should do is get yourself a j roller they're not that expensive they use them for laminate when they're putting down laminate on a substrate for cabinets or countertops and what's that j roller you can bear down and mash that glue that's on that keel guard right into the fiberglass of the boat or the plastic I did the same thing that you're doing right now on the front of my kayak then along the back where you got the gunnels where it's flat on the on the outside of the gunnels I put the 4-in wide pieces on the back so when you pull it up if it happens to hit the rocks it protects it in the back and I use that j roller if when before I put the j roller to it even though it was in the sun that heated it up with a heat gun just a little bit to make it more pliable and I put good pressure on it and I've been using it now since July and into the weather that we have now and I haven't had no problems with it or was it trying to peel or anything else Good video
I personally would not have painted it, because its all just going to get scratched off and look worse but love the wrap to protect bottom side like that.
great work dude, thanks for sharing.
Great video man, any update on the condition of the keel guard would be appreciated.
Sold it don’t really know
@@spiltmilt When you sold it was it holding up?
Yes it had worn down about 30% after a year's use.
Another excellent and helpful video. I was thinking about getting this product but I wonder, once it requires replacement how easy would it be to remove? It's hard plastic so I assume some careful sanding?
You can sand it off but a putty knife, solvent, and some elbow grease is a better option.
Hey Tyler. First of all, your videos are great! Spend a lot of time on your channel. Thank you. What do you think about the jb weld application for a keel guard? Seems like the cheapest application along with the most protective.
Have not heard of that approach.
Excellent video as always. I saw you posted a picture of you fishing for albacore a few days back. Do you worry about the mercury content of tuna at all?
I do try and limit tuna intake across the year due to mercury. Thankfully the young Albacore Tuna off the Pacific Northwest coast do have not lived long enough to bioaccumulate the high mercury contents found in most commercially available tuna. Based on the mercury content in fish sampled off our coast by OSU and recommendations for mercury consumption by health officials I try and limit my intake to less than 8 oz per week across the year.
@@spiltmilt Oh wow I wasn't aware of that, but it makes sense since they are much smaller than their full grown, deep sea counter parts. How many days per week do you eat fish? It seems like you fish on a pretty regular basis so I'm just curious.
@Split Milt Production - How's this keel guard holding up? I have a new Big Water 132 that I've taken out once and now noticed a few scratches. Would like to see how your held up since the install. Verbiage description is good. Photo's would be helpful too. Thanks for your time and effort putting this together.
Still looks good. The guard is scratched up but that is kind of the point. I'll post a pic on my community wall soon.
@@spiltmilt If/when it needs to be replaced, how would one go about removing the old unit?
Nicely done sir...
Question for you, do you know anything about sea eagle inflatable kayaks? Are they good?
Thanks
Never used one but know of several other anglers who do. I regularly see folks fishing out of Sea Eagle rafts.
Those wrinkles don’t look good
Did you also apply this to your Autopilot 120?
I did not. Going to order the Berle Pro kydex guards at some point
Thanks. I will try the BerleyPro Bumper Bro Kayak Keel Guard.
Did you ever consider taking off the clear backing thats on the outside? You sanded the backing and painted it....ouch
I removed it. I'm not a moron. Thanks for stopping by.
@@spiltmilt Oh good, didn't see it on the video. What about wiping with alcohol only to sand afterwards and then touching the surface with your hands and not cleaning the surface before applying the guard. Did you fix that too and not showing it in the video? Just wondering....