【1/700】IJN ZUIKAKU aircraft carrier”瑞鶴”(Subtitle support
Вставка
- Опубліковано 7 кві 2022
- Tamiya's 1/700 aircraft carrier Zuikaku was produced.
Etched parts etc. are not used. I have assembled it straight as it is kit.
Carrier-based aircraft comes with three types. You can arrange them all, but they are arranged according to the assembly instructions.
At first I had the impression that camouflage painting was very difficult, but I was able to finish it very easily when I cut and used the one that copied the instructions 1.89 times.
The form after completion is very satisfying.
タミヤの1/700 空母瑞鶴を製作しました。
エッチングパーツなどは使用しておりません。キットのままをストレートに組み立てています。
艦載機は3種類付属。すべて並べることもできますが、組み立て説明書通りに配置。
当初迷彩塗装がとても難しいものかと印象を持っておりましたが、説明書を1.89倍にコピーを行ったものをカットして使いましたらとても楽に済ませられました。
完成後のフォルムはとても満足です。
xn--pzero-5o4dwjqgm395ao6r.xyz...
xn--pzero-5o4dwjqgm395ao6r.xyz...
Excellent work. A build without PE parts is quite an inspiration and a refresher from most videos in here on youtube
In Japan, it is very difficult to get etched parts.
カッコいい‼️
ありがとうございます。
One-box modeling! too amazing!
The painting process, which is particular about your scale, made her even more attractive.
Drawing a model of a ship in camouflage is a headache for me, and my goal is to draw Bismarck neatly.
thank you! I learned a lot!!!!!!!!!!!!!!!!!!!!
I am always grateful for your help. This kit seems to be a product about 30 years ago, so it was easy to assemble and there was a camouflage material, so I was able to handle it with an enlarged copy. Bismarck's camouflage is tight, isn't it? Since the three-dimensional vertical line extends not only to the hull but also to buildings such as bridges, it seems that correction is essential with a brush.
私も作った。タミヤとしては可もなく不可もなく… 古い隼鷹の方が秀作に思えます。
この迷彩の元って
このプラモの通りのやつでしょ?
色は違うが
大人になって初めてスプレー塗装やったのだから
切り分けを覚えていた
pZeroさんこんにちは☺️
1/700の零戦をたくさん見るとめさのさんの動画を思い出しちゃいますね!?😅
今回の水表現って既製品のシートですか?それとも透明レジンですか?🧐
話変わりますが…ダーティペアの戦艦が8月に発売されますが、主人公のケイ&ユリの1/20フィギュアも付属してますがチェックされてますか?😅
はやしさんこんにちは^^
めさのさんの3Dモデルの戦艦をいつか3Dプリントして作りたいです。めさの饅頭は一発で出来ましたw
水表現はNゲージ用のものらしいです、アマゾンに売っていました。あれが3枚セットなので無駄っぽいけど1/350の大きさになると必要なのかもしれませんね。
ダーティペア存じておりますが、見たことないんです。当時私の田舎には放送が入らずオヨヨ><フィギュアもあるのですね。1/20かぁ~。。。
pZeroさんこんにちは😊
実は僕も観た事ありません😅
でも…マクロスのたまごひこーきのミンメイフィギュアと思えば今回の物はかなり安価だと思います😊
うおーそう来たか~wムズムズしますやんw
めさ子いる!
大砲ドッカーン!吹っ飛ぶめさ子饅頭たちw
めさよ~!!
あとで救助しておきます。
このくだり好きw
めさのさんの生首フィギュアだとッ!Σ੧(❛□❛✿)
大和改とか作ろうぜ!d( ̄  ̄)
大和改いつかやれるといいんですがw
しかし彼女本人は生首とは言っておらず饅頭かとw
もっと大きなプリンターが欲しいです^^;
昔やってた”艦コレ”で見た程度だなぁー
バグさん艦コレで一番人気の駆逐艦はなにかおしえてくれませぃw
作ってみようと思います。たとえ個人的に好きな奴でもOKだから。おせーてw
@@spgmodels5709 一番人気って・・・
艦これ自体がかなり、やってないから
一応@Wiki調べですと、
1,雪風改
2,綾波改二
3,夕立改二
と、なっております
雪風「改」?!はじめて知りました。
ほうほう、綾波と夕立ですね。綾波はすでに持ってるのでこの辺かな。
ありがとうございます^^/