DIY Mulifunctional Beltsander - Discsander Knife Sharpening

Поділитися
Вставка
  • Опубліковано 29 лис 2024

КОМЕНТАРІ • 549

  • @danbarrett6113
    @danbarrett6113 4 роки тому +23

    Brother I could watch you ALL DAY LONG

  • @cullumjw
    @cullumjw 4 роки тому +35

    I totally agree: There's no thrill in just buying one of those classic paper shredders. =)
    Nice design and loved seeing the build!

  • @tony49PA
    @tony49PA 2 роки тому +3

    One might agree with Andrade's and Just's comments. But this does not diminish the skills, ideas, manual skills, cleaning, and the fact of making their knowledge available to those who have to learn. Bravo The Meatalist

  • @Doctor-Robo
    @Doctor-Robo 4 роки тому +9

    A very interesting configuration! Superb angle grinder belt sander! Thank you for the video! 👍👍👍

  • @SD-rq2ob
    @SD-rq2ob Рік тому +2

    I do like those MaxiFlex gloves, I wear them all the time and in my opinion they are the best glove you can get.

  • @AnAverageRider
    @AnAverageRider 4 роки тому +3

    Awesome demonstration of what one can do with basic tools and a ton of skill

  • @KhanhNguyen-zn5co
    @KhanhNguyen-zn5co 4 роки тому +6

    The best one of Beltsander that I've seen 👍

  • @johnupchurch7685
    @johnupchurch7685 4 роки тому +4

    You are quite the fabricator! Great project, the knife sharpener is the best.

  • @willd6515
    @willd6515 4 роки тому +4

    Wow, that's one versatile grinder, nice job.
    If I may give you a tip, when grinding the edge of a blade with a machine, dip the blade in water every few strokes to keep it cool.
    This way you don't mess up the heat treath so your knife won't go dull after a little use.

    • @TheMetalist
      @TheMetalist  4 роки тому +2

      Thank you 😁 yes you are 100% right. I should have gone into more detail on knife sharpening (lots of people told me that allready 😅) i thought that i just show the option how to sharp knifes with my old broken kitchen knife 😊

  • @ifell3
    @ifell3 4 роки тому +11

    I've seen a few of these and always wanted to build one. This must be the most over engineered one I've seen, but robust and most universal too. Enjoyed your build!

  • @rodfletcher9937
    @rodfletcher9937 3 роки тому +1

    They don’t call you the Metalist for nothing, well done.

  • @fotomotoxxiii
    @fotomotoxxiii 4 роки тому +4

    How could someone thumbs down this video. I'm blown away at both design and functionality of this. Excellent job mate.

  • @EpicBastler
    @EpicBastler 4 роки тому +2

    best design I've seen so far

  • @gauthierpruvost
    @gauthierpruvost 3 роки тому +2

    you are a real god of metal my brother

  • @HairuddinWJUAlongWJU
    @HairuddinWJUAlongWJU Рік тому +1

    You are master metal sir...really good build

  • @iHayri1
    @iHayri1 2 роки тому +2

    Hi Dirk, I must say this is not a multi but a multitude of multi functional devices I have seen. I can relate that you came up with new ideas along the build and integrated them very well. I have plans for making a 72x2" beltgrinder but never got around to it. For this year my goal is to build and finish my CNC Lathe, it is coming along quite nicely. Anyway, I enjoyed every minute of your video, thanks.

    • @TheMetalist
      @TheMetalist  2 роки тому +1

      Thank you 😁
      Uuhhh cnc lath thats awesome 😁💪

    • @iHayri1
      @iHayri1 2 роки тому

      @@TheMetalist You are very welcome. It's getting along quite nicely, will upload the first video about the lathe this weekend :-) Take care.

  • @Marz-px6vx
    @Marz-px6vx 2 роки тому +1

    Talk about Transformers. Well built all-in-one belt sander. Nicely done ✔ 👏 👍 👌

  • @leebatt7964
    @leebatt7964 3 роки тому +29

    Imagine having this guy for a dad, “dad, I want a mini bike that turns into rocket ship!”.....”give me a day. What color you want it to be son?”.

  • @aliaslan5755
    @aliaslan5755 2 роки тому +1

    Yok artık! Bu kadar da olmaz dedirten video! Tebrikler! 👍👍👍

  • @nickb3005
    @nickb3005 3 роки тому +1

    Ok, now that is a slick little setup you made. Nice frigging job man!

  • @by_talik
    @by_talik 2 роки тому +1

    вот за идею столика для ленточной пилы отдельное спасибо!!
    я всё думал как сделать нормальный столик , а то тот что в комплекте просто крепится на 2 болта. а надо сделать под тиски!! отлично.

  • @filibertogurrola4501
    @filibertogurrola4501 2 роки тому +1

    No worries, you don't need a microphone to keep us entretained.
    Great job!!!

  • @Alanbataar
    @Alanbataar 4 роки тому +3

    Impressive! I came into the video thinking it was an oversized "dyna file", but clearly, it's much more capable than that. Nice work.

  • @Crazyidea1620
    @Crazyidea1620 4 роки тому +2

    This s called real creativity man u won my heart . Good wishes

  • @garybrown9719
    @garybrown9719 3 роки тому +2

    Best yet very compact and portable

  • @TheDopalgangr
    @TheDopalgangr 4 роки тому +4

    Damn that’s a big knife. Another great build. Keep inspiring me!!

  • @iCedPapaya
    @iCedPapaya 4 роки тому +2

    Suddenly i forgot wtf tool i needed hahahaha Nicely done 💚

  • @moonolyth
    @moonolyth 4 роки тому +1

    Was thinking of building a big bad boy, but now have to think about it. This little one would fit most of my builds. Great design!

  • @sasablazinac8738
    @sasablazinac8738 4 роки тому +1

    Majstore svaka čast, čestitam!!!!!

  • @Lambman001
    @Lambman001 4 роки тому +1

    Give that man a BELLS. You are genius!!!

  • @blacklocksmith.918
    @blacklocksmith.918 4 роки тому +4

    Приветствую. Отличная работа, БРАВО Мастеру!

  • @clydebalcom3679
    @clydebalcom3679 2 роки тому

    In the event of a zombie apocalypse, I want this guy to build the weapons and tools.

  • @alanatkins4315
    @alanatkins4315 4 роки тому +1

    Similar devices were sold in Australia in the eighties 1 for 4 inch angle grinders and one that fitted on an 8 inch bench grinder,still have and use the 4 inch.

  • @tarcisosergiodepontes8675
    @tarcisosergiodepontes8675 2 роки тому +1

    The Mentalist... THE METALIST.. Great.. kkk... excellent Job...

  • @vjekoslav20
    @vjekoslav20 3 роки тому +1

    Those Fein angle grinder are so sweet,great tools bro

  • @GrizzAxxemann
    @GrizzAxxemann 4 роки тому +22

    So when is the kit going to come available for those of us without a fully loaded workshop?

    • @TheMetalist
      @TheMetalist  4 роки тому +12

      Ok 😊 let you know 👍🏻

    • @hazlox
      @hazlox 4 роки тому +1

      Yes!

    • @jimperegoy6382
      @jimperegoy6382 4 роки тому +4

      I am interested in the kit also. Please let us know when ready.

    • @frankcostanzo8391
      @frankcostanzo8391 4 роки тому +4

      I'll give you many hundreds of dollars for one of these bad boys. What an awesome setup for all those different grinding situations. Unreal space saver too.

    • @timnoah3810
      @timnoah3810 4 роки тому +3

      it appears that fully loaded workshop was created from scratch a piece at at time, so follow his lead. most impressive.

  • @iosifteifel1378
    @iosifteifel1378 2 роки тому +1

    ДА УЖЖЖ,, ВИДЕЛ МНОГО КОНСТРУКЦИЙ САМОДЕЛОК С БОЛГАРКИ - ГРИНДЕР,, НО ЭТА КОНСТРУКЦИЯ КЛАССИЧЕСКАЯ, В НЕЁ ВЛОЖЕНА МУЗЫКА ДУШИ. КРУТИТСЯ , ВЕРТИТСЯ КАК ВЕРТОЛЁТ ВО ВСЕ СТОРОНЫ.
    АЙ ДА МОЛОДЦА, 👍👍👍
    Это первая и самая лучшая поделка на всём ютубе.
    Здоровья, дальнейших творческих успехов.
    Интересно, если заказать, сколько будет стоить такая конструкция без болгарки.?!

  • @sydmillertek
    @sydmillertek 3 роки тому +1

    Loving the punishment for your misbehaving tensioner lever.

  • @DANIEL-ls5ku
    @DANIEL-ls5ku 2 роки тому +1

    I'm limited with space, this is exactly what i need!

  • @jeanvanjaarsveld6124
    @jeanvanjaarsveld6124 3 роки тому

    ..think he does this all day..very good!

  • @CreativeDailyWorks
    @CreativeDailyWorks 2 роки тому +1

    I really love this tools very much.

  • @markhedquist9597
    @markhedquist9597 3 роки тому +1

    Uh, wow. Nice effing job. This is THE machine. I could go on... Very nice build, man.

  • @MustHarb
    @MustHarb 4 роки тому +2

    perfect like a boss a metalist mentalist

  • @roadshowautosports
    @roadshowautosports 3 роки тому +8

    Well, I love the video and skills this guy show but, when I’m done buying all the tools he has, to be able to accomplish this task... I’m better buying the tool itself! Lol
    Great video, my man! Super simple idea, yet you were able to put so many options that no belt saber in the market had! You’re a genius!
    I’m intrigued by your welding machine! So smooth and versatile with the welding spots so small and effortless! What kind is that?
    Take care and thanks again!

    • @janvrabec3401
      @janvrabec3401 2 роки тому

      He uses MIG/TIG i think, because he used normal welding in protective atmosphere and also pulse welding, and he got CO2 with wire feeding. Not sure why he uses which tho.

  • @darrenthompson6115
    @darrenthompson6115 3 роки тому +1

    Your a talented thinking fabricator. It impresses me.... 👍👍

  • @marcofcat
    @marcofcat 2 роки тому

    100% hypnotic video. Kudos

  • @MacStrange
    @MacStrange 4 роки тому +1

    Versatile and spectacular tool made with great skill

  • @rickslijkhuis6822
    @rickslijkhuis6822 4 роки тому +2

    Impressive. I just wish I had the 20 other machines you use to build it.

    • @TheMetalist
      @TheMetalist  4 роки тому +1

      Mmmhh yes that right, you need some Tools to get started 😅

  • @johnpartridge7623
    @johnpartridge7623 Рік тому

    Very good design & well built-a very useful Machine 👍👍👍👍👍👍👍

  • @salehhamad6446
    @salehhamad6446 4 роки тому +1

    You are extra professional
    I like what do you do
    Good job 👌👌👌👌👌

  • @thyfr26
    @thyfr26 Рік тому

    great work, also love the shelfs of your workbench

  • @shanmugamkrish6644
    @shanmugamkrish6644 4 роки тому +1

    Perfect modified collection,great sir.

  • @adrianmuller9234
    @adrianmuller9234 2 місяці тому

    Hi Dirk,
    Mega coole Videos,
    Mal ne kurze Frage ich suche nach einem ähnlichen schleifgerät aber die meisten haben zu wenig Power, gibt es welche die nicht zu teuer sind und viel Power haben weil mit das Gerät von fein zu teuer ist. Oder geht ein satinier gerät auch?
    LG Adrian

  • @iybargalvanik8840
    @iybargalvanik8840 3 роки тому +1

    Muss ich nachbauen... besser als gekaufte! Von welchem Hersteller ist dein Automatische Körner? Danke!

  • @dadcanufixit
    @dadcanufixit 4 роки тому +1

    Absolute craftsmanship

    • @TheMetalist
      @TheMetalist  4 роки тому

      Thank you 😊

    • @dadcanufixit
      @dadcanufixit 4 роки тому +1

      @@TheMetalist as they say where I come from "Croeso"

  • @ruatarengsicolneyrengsi8924
    @ruatarengsicolneyrengsi8924 2 роки тому +1

    Just marvelous! Totally inspiring. Thanks for sharing.

  • @pfow2006
    @pfow2006 Місяць тому

    man your creations are awesome, cant even buy stuff this good, i wish i was even close to your skill level, i was wondering if u were going to do the paper test, would have been dissapointed if you didnt, thanks for the vid

  • @dante8506
    @dante8506 4 роки тому +1

    Thats an amazing time and space saver man. I would love to purchase one of you.

  • @hasankorzebor
    @hasankorzebor 4 роки тому +2

    That’s great 😃 you are so professional

  • @wolfparty4234
    @wolfparty4234 3 роки тому +1

    Game changer, for sure💪🏼💪🏼🔥🔥🔥

  • @Anishcj89444
    @Anishcj89444 4 роки тому +1

    I bet this video gonna hit more than 10k likes for sure, best design ever. I was actually planning to make one but not like this one this is more perfect and efficiently designed than mine.thank you for making this video.eagerly waiting for another project like this one👍👍👍👌👌

    • @TheMetalist
      @TheMetalist  4 роки тому +2

      Thank you 😊 lots of them allready in planing 💪🏻

    • @Anishcj89444
      @Anishcj89444 4 роки тому +1

      The Metalist 🤗👍👍👍

  • @7Steels
    @7Steels 4 роки тому +3

    How the hell do you drill such straight holes using a hand drill? If a regular person does this build, a drill press would be the go to machine.
    Great design and precision.
    Be well

    • @TheMetalist
      @TheMetalist  4 роки тому +1

      Thank you 😊 i work with tools my whole life and i just got used to do drill it by hand 🤷🏻‍♂️ 😁

  • @Blacksmith1967
    @Blacksmith1967 2 роки тому +1

    Very nice build 👌 do you have a link to the angle grinder you used to the build or the specifications of it...?

  • @seeker667123
    @seeker667123 4 роки тому +2

    A very nice build. Thanks for vid.
    What was the purpose of preheating (at 4min ) the tube before welding?

    • @TheMetalist
      @TheMetalist  4 роки тому +1

      Thank you 🙂 for welding Aluminum you need a lot of heat. (Thick naterials) And to make it go faste i heat it up befor i weld it 😁 it would be also working without.

  • @Unknown_Industries_
    @Unknown_Industries_ 2 роки тому +1

    That an excellent build 👏thanks for sharing 😊

  • @bobbymeadows9373
    @bobbymeadows9373 Рік тому +1

    Awesome build, what would you charge for one of those?

  • @bsimpson6204
    @bsimpson6204 4 роки тому +2

    You got that knife good and sharp, I hate those thick blades for sharpening

    • @TheMetalist
      @TheMetalist  4 роки тому +1

      Yes it took a little bit time to sharp it.
      For me it was the First time to sharp a thick blade like that 😊

  • @eugeniocorralescordero4282
    @eugeniocorralescordero4282 4 роки тому +1

    GENIAL, SIN PALABRAS.
    Saludos y bendiciones desde Costa Rica 🇨🇷 🇨🇷 🇨🇷 🇨🇷 🇨🇷 🇨🇷 🇨🇷 🇨🇷 🇨🇷 🇨🇷 🇨🇷 🇨🇷 🇨🇷

  • @marcinlisiak700
    @marcinlisiak700 4 роки тому +2

    Why 7 thumbs down?? Maybe two left handed engineers with no idea how to make quality tools 🤣🤣
    I'm have a questions 😁
    Did I'm good see on your workshop flor is it a steel plate?? Or something else??
    And what brand is your marking gauge and pen?? In UK is hard to get marking gauge (metric) but order in Poland and send to UK is horrible expensive tool 😁😁
    Chears.
    P. S I'm waiting for next project. Maybe some tube notcher or another welding tools😁😁

    • @TheMetalist
      @TheMetalist  4 роки тому +1

      Thank you 😊 yes its steel (wood underneath 😅) the marking gauge is from Holex the pen is a Edding 8850.
      Soon i have a project for tube notching.

  • @mr.tempos
    @mr.tempos 3 роки тому +1

    Seriously good craftman!

  • @николайвиноградов-у6ц

    Good grinder.I want such grinder.

  • @stephensteel341
    @stephensteel341 2 роки тому +1

    Don’t forget guys Thoriated tungsten electrodes contain thorium, a radioactive material grind them outside or well ventilated area.

  • @williamwooden3131
    @williamwooden3131 2 роки тому +2

    Love your work and believe me I subscribed. I would like to know were did you get the scale, sliding ruler for measuring and marking?

    • @TheMetalist
      @TheMetalist  2 роки тому +1

      Will come soon on my etsy shop

  • @mimu9599
    @mimu9599 4 роки тому +2

    Bester deutscher Kanal

  • @namberguan5746
    @namberguan5746 3 роки тому +2

    Simplemente impresionante (me sangran las manos de aplaudir )
    Lo mejor es que aun no teniendo medios ni de maquinaria ni de manitas para clonarlo.
    E sacado grandes ideas para otras cosas.

  • @ulysses_grant
    @ulysses_grant 3 роки тому +4

    Amazing! Do you have the link for that adjustable ruler you use? Thank you!

  • @Hutchy45445
    @Hutchy45445 4 роки тому +1

    That's awesome! Great design and great video 👍

  • @meekenya
    @meekenya 3 роки тому +2

    Impressive. Kindly share names and links to some of the tools you are using , like at 3:33 - tool used to get center of circle

    • @TheMetalist
      @TheMetalist  3 роки тому +1

      Thank you 🙂
      Certering Angle
      To share all the links its very difficult because of the diffrent countries. But i will find something out ...you not the first to ask!

  • @andersonedmund7968
    @andersonedmund7968 2 роки тому +1

    Very nice I really like that I want one amazing job

  • @dam5959
    @dam5959 4 роки тому +3

    Great design and really enjoy watching you build. So do you design on the fly or did you sit down and draw this thing up. Really like all the attachments. Need to put it into fabrication I bet you could sell a ton of these.

    • @TheMetalist
      @TheMetalist  4 роки тому +2

      Thank you 🙂 i draw down a rough sketch and then i started. 99% it works like that 😁
      Yes i could sell it...maybe 😅

  • @antonpodgornov2102
    @antonpodgornov2102 4 роки тому +1

    Огромное спасибо👍👍👍. Очень многое у вас подглядел, свою болгарку дотюню также.

  • @mftmachining
    @mftmachining 4 роки тому +2

    Excellent job on this one....I see that you´re a FEIN-Man....i´m too....best tools u can get.

    • @TheMetalist
      @TheMetalist  4 роки тому

      Thank you 😊 yes fein is one of my favorit 😁

  • @jothain
    @jothain 4 роки тому +1

    That's one really nice design. 👍👍

  • @chrisil9356
    @chrisil9356 2 роки тому +1

    This grinder is a madness but unfortunately there is not to buy? Would be very interested in such a device.lg Christian

  • @johnpreston9844
    @johnpreston9844 2 роки тому +1

    Or how many process do you really use ?

  • @ELKMotorsports
    @ELKMotorsports 3 роки тому +1

    Ok brother, I need to know. What are you using as your scribe gauge? I get by with just an adjustable square, but I'm really diggin what your using.

  • @tracykooken2606
    @tracykooken2606 4 роки тому +1

    now thats a knife !!!! ( quoted )

  • @Eff-U-Kay
    @Eff-U-Kay 2 роки тому +1

    Insane skill set. Congrats on my sub 👍

  • @حسين-ج9ط7ي
    @حسين-ج9ط7ي 2 роки тому +1

    Great job, thank you brother. You are so talented

  • @dwright361
    @dwright361 2 роки тому +1

    where can one find the center point tool and the depth measuring tools you use?

  • @josegodoy6497
    @josegodoy6497 4 роки тому +1

    Un genio .muchas gracias .Saludos de argentina Moquehue

  • @andrel3
    @andrel3 4 роки тому +3

    What size belt are you using on this? Best design I’ve seen thus far!

    • @TheMetalist
      @TheMetalist  4 роки тому

      Thank you 😊 its 40x780mm

    • @adetornado3605
      @adetornado3605 3 роки тому

      yes, akhirna kapanggih oge ukurana.. thank bro

  • @emperadorromano567
    @emperadorromano567 3 роки тому +1

    Man, I love the chill and cassual way you work. Yet it was beautiful and perfectly functional, I wish my work place would be like that 😩. Btw, i'm still amazed about how you can turn 1 tool into 3 or more tools. Imma copy your machines when I have a workshop.

    • @Mr.Phoreskin
      @Mr.Phoreskin 3 роки тому +1

      Same bro. Same😩
      So much anguish in wanting to build all these things but so little time outside of my 9-5 fab job😔
      To top it off, my boss thinks he’s a master inventor and has me building literal trash in my spare time when all I want to do in my spare time is build tools to help me do my job better 🙄

    • @emperadorromano567
      @emperadorromano567 3 роки тому +1

      @@Mr.Phoreskin I feel you mate. Don't let him take your free time, it's yours. And if you are not happy in your job, go find another one. They have you believing like you owe them something and that you are unworthy and wouldn't be accepted anywhere else. But that is not true. BTW awesome name bro XD

    • @garybrown9719
      @garybrown9719 3 роки тому +1

      @@emperadorromano567 not at my job in the last 4 years have had a new supervisor every year.
      Are most resent - present supervisor is young and lacks experience.
      But its ok I'm getting older and plan to retire in four years. Just have to pace myself and stay healthy.
      Im a mechanic and certified welder
      I love welding and build tools to make life easier.

  • @konstantin1419
    @konstantin1419 6 місяців тому

    Привет! А какой маркер вы используете? Интересно!

  • @jimallen199
    @jimallen199 4 роки тому +2

    impressive I'd love one of these.

  • @dhruvverma2000
    @dhruvverma2000 4 роки тому +1

    Thats an awesome and very practical tool 😍

  • @r24m14popo
    @r24m14popo 4 роки тому +2

    wooo! nice idea!
    good work:)

  • @Zophus1
    @Zophus1 4 роки тому +1

    Great video. Excellent editing! 😀👍

  • @celsolino5021
    @celsolino5021 3 роки тому +2

    Absolutely wonderful

  • @jimrow6704
    @jimrow6704 Рік тому

    Outstanding build!