That's a Great shot at 3:55 !! Seems like i've seen that machine a 1000 times before but, that is one Bad-Ass Machine ! Smooth....lololol..Have a Great Evening Chris !!
Hi Chris, hope you’re staying hydrated in this lousy humid heat we’re having. Thanks for posting! Between working and editing where do you find time to work on your house n farm?? You da man ! Take care.
Chris, or any other knowledgeable diggers out there, I'm looking at a property with a roughly 2 acre pond that gets real close to being dry late in the year. It's just fed by watershed. My plan is to add maybe another 4-5 feet to the depth to allow it to hold much more water. Do you think this is a plan that stands a chance of working to keep from drying out late season?
Whoa , look at all that new clean equipment lots of lots of $$$$.. Looks like you in high cotton my friend..Going to go back and watch ole Andrew he's not there YET...
What slopes do you like on the dam 4.1? Do you check it? or do you just fo by feel? Were those 24" pipes? I noticed you said inches and Tim said tenths? Is that what you use is Tenths?
I was digging a big pine stump with a cat mini x today and I was thinking how awesome that 250 must be to run. I could have scooped the whole stump in one shot, instead of digging around it for 15 minutes. I need me a big excavator.
I like your new Hitachi but man that Volvo 250 is nice.I've ran both brands new and just like the Volvo setup inside and out. Liehberr is up there for me as well except the stupid cup holder behind the seat 🙄lol
I am surprised you didnt do the overflow before you backfilled. Your business model seems to be working. No longer are you working with older equipment (ie the vids of 2014 with the military M35A2). Tho it was fun to see you and Tim having fun in the dirt loading the 6x6. Since you didnt answer the email, did you sell the M35A2?
It is easier to do this then to put in the over flow in first. Otherwise you would have to work around the pipe and the risk of crushing it. This is way faster.
Have I missed the purchase of a 250 excavator? I've not missed a video. I've actually watched old videos, including the one where he sold the 250. Oh well, excellent work.
The site foreman strikes again, walks under the arm/bucket as he's not happy with the placement. I have to assume he plays an important part in terms of the work you get but he is at best an incumbrancer to the job
What slopes do you like on the dam 4.1? Do you check it? or do you just fo by feel? Were those 24" pipes? I noticed you said inches and Tim said tenths? Is that what you use is Tenths?
Man I love watching your videos. I have learned a bunch from you over the years. Thanks for all the help with helping me streamline my business.
Man you are truly a dirt engineer. You do some amazing work. Love the channel.
Nice work
Getting difficult to like your videos before 2,000 other people. Thanks Chris for sharing
Volvo knows how to build the best machines!!!
Greetins from Sweden
I'm trying to catch up on my viewing. I'm glad to watch the 'dirt moving' action and the pipe installation....thanks.
That's a Great shot at 3:55 !! Seems like i've seen that machine a 1000 times before but, that is one Bad-Ass Machine ! Smooth....lololol..Have a Great Evening Chris !!
I wonder if “Brutus” got upset when it smelled hitachi on you? Ok.back to the video. Thanks for sharing !! ✌🏻🙏 from Va 🚜🚜🚜🚜🚜
I'm here... watching as commenting!.. miss the off-road truck! "Easy girl" lol she was gonna buck you out of the cab!
You must be talking about an old Cat D300. I know that it would beat me to death when I ran one.
You definitely can tell where your all's lift started it's packed alot harder thanks for sharing Chris have a great day and stay safe out there
Got the full crew this time job is really looking nice 😎👍👍
Very nice again guys, you are a pro by now Chris, you have don so many of these jobs 👍👌😎
Love your videos you should go on Gold Rush and show them how to dig and load a truck ⛏👍 Great work!
Luved this stuff since Dad built our sandbox...
and I bought Tonka trucks from our local Western Auto. 🚜
Enjoyed the video thank you for sharing hope you are having a great weekend
Hi Chris, hope you’re staying hydrated in this lousy humid heat we’re having. Thanks for posting! Between working and editing where do you find time to work on your house n farm?? You da man ! Take care.
Great video bro, things are looking a tad dusty up your way. Most places are wet here in NZ
man that unit throws some dirt! thanks for sharing the fun.
COOL . OPERATING THAT AS IF IT WAS A PART OF YOU. AMAZING .
Wow, first time I've heard your uncle so clear and his accent is even stronger than yours Chris.
Are permits required when building or repairing a Dam ? When I was "Tillerman" in the Fire Dept. 1 Stop, 2 Go , 3 Backup. Love it.
Chris, or any other knowledgeable diggers out there, I'm looking at a property with a roughly 2 acre pond that gets real close to being dry late in the year. It's just fed by watershed. My plan is to add maybe another 4-5 feet to the depth to allow it to hold much more water. Do you think this is a plan that stands a chance of working to keep from drying out late season?
Whoa , look at all that new clean equipment lots of lots of $$$$.. Looks like you in high cotton my friend..Going to go back and watch ole Andrew he's not there YET...
One nice thing about working in the country, is that you can easily find a parking spot.
Looks like it's gonna be time for new bucket teeth pretty soon on the 250. You've been digging a bit, lol. Good video.
You really get an idea how huge the bucket is when Tim stands next to it at 10:00.
I was watching a video about a mine company the other day and they were using a 750 Volvo loading Haul trucks with just two scoops.
You can really see just how big that machine is!!! Is it as quick as the 220??
What slopes do you like on the dam 4.1? Do you check it? or do you just fo by feel? Were those 24" pipes?
I noticed you said inches and Tim said tenths? Is that what you use is Tenths?
I may be wrong never watched this channel but that looks like the boss in the white button up shirt
Cool project, Nice work.
Your off road dump truck driver is lucky. I the worse one I have been in is a old Cat 775C. A tight squeeze for me on the catwalk.
What you need is to get a Trimbal so Jpaydirt'll quit yappin'. 😁 Then you can retire the laser.
Thanks for the video. 👍
Chris, I heard NASA called...
you’ve got the Moon terraform job !! 🚀🌓
Tree Climbing they need a pond damn for the ice melts lol
That is some dry & dusty earth you are digging up Chris by the overflow pipe!
Yes operating that excavator is like riding a rodio bull. Steve in Thailand.
I was digging a big pine stump with a cat mini x today and I was thinking how awesome that 250 must be to run. I could have scooped the whole stump in one shot, instead of digging around it for 15 minutes. I need me a big excavator.
I like your new Hitachi but man that Volvo 250 is nice.I've ran both brands new and just like the Volvo setup inside and out. Liehberr is up there for me as well except the stupid cup holder behind the seat 🙄lol
looks like the ground is dryer than a popcorn fart dose tha make it harder to track or pack down
Chris. Just curious. Obviously, the A30 Truck is an off-road truck but can it actually be driven on-road?
Do you guys fuel your own equipment or do you have a fuel company come to your job sights?
we have our own fuel tanks at the shop and tanks in the service truck
I am surprised you didnt do the overflow before you backfilled.
Your business model seems to be working. No longer are you working with older equipment (ie the vids of 2014 with the military M35A2). Tho it was fun to see you and Tim having fun in the dirt loading the 6x6. Since you didnt answer the email, did you sell the M35A2?
hey, sorry but yes I did sell it about a year ago
It is easier to do this then to put in the over flow in first. Otherwise you would have to work around the pipe and the risk of crushing it. This is way faster.
Happy Thanksgiving Chris Guins
Does nr 18 stand for Kyle Thomas Busch ? like contotorp 3 stand for Dale.
You should put us in the dozer with Tim so we can see how good of an operator he really is. lol
So did the owner decide to have the other end of his pond dredged out?
You have put so many of those over flows in your a pro by now
He has had alittle practice. LOL
Yes he has
How much does one of those plastic pipes weigh Chris?
Nice to hear about your good morning dew but sorry it's caked everywhere
Love the vids but this one ended abruptly..... like to see it to the end.
Have I missed the purchase of a 250 excavator? I've not missed a video. I've actually watched old videos, including the one where he sold the 250. Oh well, excellent work.
Are you thinking about the 290 that they sold?
@@stanpatterson5033 I must be. It surprised me to see a 250. I know he's got a 160 and a 220. Or maybe I'm just watching him dig to much. Lol. Thanks.
What state this guy in out of curiosity
why does tim and the other guy have no saftey helmets or hi-vis vests on?
The "other guy" is the boss, and they are waaay out in the country. The safety nazi's don't come that far out.
lol, good point, keep the videos coming, great stuff!
Dry, dusty mud.
Is that your uncle with you and Tim?
Thanks.
Uncle John. 👍
Letsdig you are. Awesome
do you ever go back and film how jobs turn out later
Chris is Tim related to you?
I'm not sure why the damn had to be made wider, other than to fit the 250 onto it.
Your uncle always wear the white collared shirt and blue jean shorts? Been watching for years and can’t remember him in anything else
Sounds like you need to do some maintenance to the 250.
Love the vids man
You should get a GoPro and get a head mount so we can see more and you can concentrate on your job 👍
I tried and evidently i move my head so much it make people sea sick LOL
@@letsdig18 ever considered a dedicated two camera set-up? like one in the cab, and one outside, so you could flip flop in editing?
Dam it! 😁
POTTY MOUTH ! 😊
Is the older guy the. Boss
How many times you got to redo that to get it on Greg bro you a little rusty or something
2GNC gonna need to change to 3 GNC
NEW HAIRCUT I see
Seriously, do you guys advertise in "Farm pond, and Municipal lake monthly" or something??? LOL How in the heck do you get so many pond jobs??????
Badgermatt75 2016 when your that good word travels fast
They have found a niche and are filling it, smart business.
Have you ever unearthed a national treasure or ancient fossil or anything tantalizing enough to tell stories about while you dig and film?
who goes out and prices all the jobs?
that big man in the white shirt
.
Mba'eteko...
Iporãmba pio hina..?
.
Jorge Antonio Romero Espinola no entiendo Portequesa
Es idioma guaraní...
What is that you are digging is it dehydrated mud lol
Nice!!!
When are you going to put out The Timmy bloopers?? We’ve all been waiting
Who’s the gentleman that always wears a white shirt?
Chris's Uncle.
Also the boss..
Did u see a white Duramax rolling coal in Sanford today😂
Yeah did you turn around and pass us on us 1?
Yeah I didn’t know if it were u or not so I turned around to find out😂
Looks like you have a stalker Chris. Lol. 🇬🇧
Thats one big wacky rigged senko.
Chris, you are an egg spurt...😜
the 290 would have been good for this job
I don't think it fit their needs, besides I think it had a few issues.
Lol..Rock 92.lol
Volvo s are sooo whiney
FORD Work Truck.......Ford........
The site foreman strikes again, walks under the arm/bucket as he's not happy with the placement. I have to assume he plays an important part in terms of the work you get but he is at best an incumbrancer to the job
Viewer # 2,646
What slopes do you like on the dam 4.1? Do you check it? or do you just fo by feel? Were those 24" pipes?
I noticed you said inches and Tim said tenths? Is that what you use is Tenths?