HOW TO REMOVE OR REPLACE INTAKE MANIFOLD ON MAZDA CX-7 CX7 MAZDASPEED 3 6
Вставка
- Опубліковано 26 січ 2019
- HOW TO REMOVE OR REPLACE INTAKE MANIFOLD ON MAZDA CX-7 CX7 MAZDASPEED 3 6
In this video we will show you how to remove or replace the intake manifold on Mazda CX-7. We demonstrated on a 2011 Mazda CX-7 but the procedure will be the same for the whole generation with the 2.3 engine from 2006 to 2012 and even might work on Mazdaspeed 3 and Mazdaspeed 6
This video might be helpful on:
2006 Mazda CX-7, Mazdaspeed 3, Mazdaspeed 6 How to remove and replace Intake Manifold
2007 Mazda CX-7, Mazdaspeed 3, Mazdaspeed 6 How to remove and replace Intake Manifold
2008 Mazda CX-7, Mazdaspeed 3, Mazdaspeed 6 How to remove and replace Intake Manifold
2009 Mazda CX-7, Mazdaspeed 3, Mazdaspeed 6 How to remove and replace Intake Manifold
2010 Mazda CX-7, Mazdaspeed 3, Mazdaspeed 6 How to remove and replace Intake Manifold
2011 Mazda CX-7, Mazdaspeed 3, Mazdaspeed 6 How to remove and replace Intake Manifold
2012 Mazda CX-7, Mazdaspeed 3, Mazdaspeed 6 How to remove and replace Intake Manifold
► Our Website: mechaniclifestyle.com
► Our Baby Girl Channel: goo.gl/WiVs8Y
► 2ND Car Channel: goo.gl/EBCNtc
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300
amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch
amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser
amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable
amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310
amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405
amzn.to/2jk8nqB
•GoPro HERO5 Black
amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510
amzn.to/2ktOuB7
►Social Media
Instagram: / worldmechanics
FACEBOOK PAGE: / worldmechanicsofficial...
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
World Mechanics is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, World Mechanics, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not World Mechanics. - Авто та транспорт
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ua-cam.com/channels/J9xpq0qUZevSEdBSFqO2ow.html
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
I own the Mazda CX-7 and every one of your videos have been very helpful and for that thank you
Hey guys, great video! Helps put a lot. I had one question, on the removal of the power steering reservoir. That bolt that connects then with the silver arms . U didnt completely remove it because you can.move it from side to side.. I cant get that bolt losen for the life of me. I tried almost everything but fire. Any help would be appreciated..ty guys and keep.up the awesome videos
Hi world mechanics. Thank you for this video. Is it necessary to remove the power steering pump to move the manifold back? I am just changing pcv which is under manifold. I don’t want to take entire manifold out.
These are great videos. I have a 2009 cx7. You have helped me so much.
Thank you.
Love the videos. I have the same car with a 2.5l. I lost heat and leaking coolant from under the plate with “intake manifold runner valve” do you know what this is or what it’s bolted to? ( it has four thorax bolts that is holding the valve assembly) what is underneath that valve assembly? That is where my leak is..
great work guys.
helped me alot.
Thanks
Can I ask what is the name of the component that you are disconnecting the hose from at 4.50. As mine is broken where the hose connects and I am having a loss of power and very rough running. Great videos.
What is the purpose of the foam underneath we the intake manifold? Do you have to put it back on when assembling it back together?
Is the non turbo version cx7 PVC valve located in the same place?
I don’t see anywhere to message you guys. But I have been having a lot of trouble with my runner control being stuck. On a Mazda CX-7 however, I replaced the runner control and I checked the hoses. And the hoses seem to be fine. Is it possible the vacuum valve actuator can go out on these cars? Causing it to not get the pressure???
your videos are so so helpful mate!
i recently changed injectors seals and had the injectors cleaned.
put inverting back together ,now my speed 3 is not running.it turns on, but when im on first going into 2nd
car starts to kick and lose power when i give it gas.
what can it be?
i just change the crank shaft sensor, fuel pressure sensor,
still acting the same.
now i wanna change the fuel pressure regulator and map sensor.
im hoping it solves the problem
but watching your videos makes it so clear how to go into it.
Sounds like vacuum leak probably
Do you know how to check the butterflies on the 2.0 I've changed the 2 solenoids but I think the actuator is jammed
Will there be any coolant in the manifold body where the lower hose connect (biggest hose)?
How many bolts in total are there? I count six I can feel - 5 at the top, one side ways, and one at the bottom - is that all of them? Sure would help to know there is no other hidden ones I need to worry about. Can I just slide the pump to the left or do I need to take off the serpentine belt?
Need a video on where and how to remove pcv on my 2008 cx7 turbo 2.3 liter
Its right under the intake that they remove.
Any videos on Mazda 6 gh 2010 I'm wanting to remove my intercooler ,do I need to take front bumper off to remove it or get it from the wheel arch
Love these videos
Do you have any videos on replacing a catalytic converter on a 2011 Mazda 2.3 L Turbo Grand Touring Pleeeeeese!!! Need help. Want to know if I can do alone or not. Thank you for this channel . It has helped me so so much.
Can’t thank you guys enough
Thank you guys!!!!
Can someone PLEASE PLEASE PLEASE tell me what the hose is that runs from the top of what the thermostat bolts into and runs across the front of the engine underneath the intake manifold and then turns and runs up toward the driver? The only way to see and remove it is to remove the intake manifold. The Mazda dealership cant seem to tell me what I need to order... Please somebody help!
Hi there how would I know that the problem is in fact a leak...? And where exactly would I be looking? Also how do I know the issue isn't with transmission or turbo?
I own a Mazda cx-7 2009, and I just changed the metals and worked on the timing. and after coupling I get a p2006 error. please I need help. the car is misfiring and I hear a tapping sound when I Rev the engine
Alright guys I appreciate all the videos as my wife's cx7 has had some issues now it's all back together I cannot get an engine code to come up but has LOW idle 6&700 rpm when hit the gas it revs good but in gear it just boggs down. Any suggestions?
Hi
I have the same problem now ..did you find the solution?
700 rpm is normal idle speed
How to change speed sensor at mazda 3 2005
How to replace haeter hose with out removing intake manifold CX-7 2007 Mazda
Does this affect your air conditioning? If it’s bad
Hi There! My car has broken the coolant screw how can it replace? Thanks
Heat up the end of a flat head screw driver with a torch. When it is cherry hot push it up into the screw a few millimeters where the head broke and pull it out... once it has all cooled you can then reinsert the flat head screwdriver and unscrew the broken screw. It worked for me wonderfully!
Anyone know what hose what taken off at 8:50? Mine broke and need the name of it to replace it
That’s a fuel line lol
What that part that your taking of
what the forking shirt are the torque specs and tightening order for the intake manifold?????????????????/ can;t find them anywhere at all on the whole internet
Look for the 2007 Mazda CX-7 Workshop Manual online, it should have torque specs and its available a few places. This manual works for a range of model years for these CX-7s.
So it would help many if you stated how many bolt to remove the upper intake. I have 6 and can't remove it. Where is the last one. Idc...ahhhh.. lol...
Привет Гайс нужен совет по мазде
Turn it qwock wise!
It was not necesary..to unassenbly the power stering pump....You could loose the bolts..firts the closer to the pump....With this you don´t need to bleed the fluid....and the belt continue mounted in the pulleys.
This is too funny I just did this job at our shop today had to remove all of this to get to the fuel injectors
I'm doing that now . I got a no start issue , it's getting spark and air so to check the injectors I have to take this off . Car manufacturers are idiots
jean jacque yeap check the connections good they tend to get broke when repairs are being performed in that area. This one in particular was cyl 1 misfire and fuel injector implausible. Only thing done to it before we had it was a power steering pump replacement.In which they broke the connector on the injector somehow
I need some help please. I have a P2004 on my 2007 Mazda cx7 intake stuck open
I need some help please. I have a P2004 code intake manifold stuck open
Intake runner control valve
?
@@kjaywanted that's the part you need to replace for P2004
Is there a video somewhere I can watch? Because I'll be doing it myself
Not that I know of but I can try and make 1 tomorrow
I'm not a mechanic, just working on my cars. But I can safely say with loud voice, SCREW JAPANESE CARS. The design is meant to be disposable, not repairable, not just Mazda, all of them.