Followed this video to make my own so I appreciate you for making it. Did some tweaking to the process though, I used multi-purpose craft glue instead of the tape and used a heat gun to soften the plastic while cutting it to avoid the cracking.
Good idea! I just made mine, used double side tape to hold the uv light to the top of the container cover. Now just need to find what I'll use for reflective material that will go inside. What did you use?
Great video. Do you know if putting off white Jordan 1 with the open mesh will turn yellow if I put them in this box? I need to un yellow the bottom of the soles, but am worried about the upper mesh yellowing
If it's a box, 4 walls, top and bottom, can leave one side off so it gets air flow if I don't have a fan. Would this work? The uv light would still be directly above the shoes. When it's icing it in the sun it's not boxed in...
@@msmxism3443 with out a fan to cool down the light the shoes might over heat, you'll have to check on them every HR or so just so you can gauge got hit it's getting. Just my opinion
I love the video bro good work, but I heard we can’t use tin foil because the heat generated causes seperation to the shoes, I heard we need a special type material starting with an M, Myrno foil or something? Someone help me ?
I appreciate that boss and mylar film is what it’s called but with the fan going they won’t get hot and I have a thermometer in there to monitor it. Been doing it for years and never had a pair separate on me as well. While tinfoil does hold onto heat it is a cheaper alternative for a beginner. The film would be the next step up 🙌🏾
I know this video is kinda old but couldn't you just use a carboard box instead of a plastic tote? Seems like a box would be easier to cut and would be cheaper.
@@btbkicks thanks for the reply. Also, I’ve heard others say they just use sunlight instead of a box. How well would this work? Have you tried it that way?
7/31/23 i had this Angelus sole bright for months now. I have some 1's maroon, black white around the sole. Just put this stuff on 7:46 am. Man tedious trying not to get on the black part. Then they are sitting in my window but the sun is not getting all around. I will have to flip them. Its too much. Alot people are doing the bottom like no.
![Restoring a $350 Beat Pair of Jordan 12's [Flippin Kicks EP.2]](http://i.ytimg.com/vi/WwbtvENfi2I/mqdefault.jpg)
Followed this video to make my own so I appreciate you for making it. Did some tweaking to the process though, I used multi-purpose craft glue instead of the tape and used a heat gun to soften the plastic while cutting it to avoid the cracking.
That’s hella creative and glad my video was useful 👍🏾
Good idea! I just made mine, used double side tape to hold the uv light to the top of the container cover. Now just need to find what I'll use for reflective material that will go inside. What did you use?
@@btbkicks which way do I need the fan to face....fan blowing air in or out? sorry if that's a dumb question
@@caedanjinks6054 fan blowing air in to keep the shoes cool
@btbkicks thank you!
Thank you! Reshoeven8er showed like a freaking commercial one. 3 1800 watt grow lamps? Jeez. I’m just trying to do mine lol
😂😂 I feel that
Facts. Reshoevn8r acts like everybody alive has 60 pairs each that need iced. Like no, bro. Most people don’t have $2,000,000 worth of shoes 🤦🏻♂️😂
I recommend a dremel to cut the hole much safer. I love this instructional video. Thank you!
If you spray it and line it with the foils you can squeegee the excess water out and it’ll still
Great video. Do you know if putting off white Jordan 1 with the open mesh will turn yellow if I put them in this box? I need to un yellow the bottom of the soles, but am worried about the upper mesh yellowing
It’ll actually brighten the mesh, check out my chicago off white 1 restoration video and you’ll see the effect
Dope bro!!!
Does veg/bloom both work together or can I just use one ?
@@Itstheoccasion both for best results
Another banger🔥
Thank ya thank ya
If it's a box, 4 walls, top and bottom, can leave one side off so it gets air flow if I don't have a fan. Would this work? The uv light would still be directly above the shoes. When it's icing it in the sun it's not boxed in...
I don’t see why not, just monitor the heat of the shoes and you should be fine
@@btbkicks of it's in the enclosed box and the uv light has a fan at what temp should it be at? Or not exceed?
Do you need the fan because mines has air flow holes but no fan
@@msmxism3443 with out a fan to cool down the light the shoes might over heat, you'll have to check on them every HR or so just so you can gauge got hit it's getting. Just my opinion
@@msmxism3443 long as it stays under 83 degrees in the box you’ll be cool
I love the video bro good work, but I heard we can’t use tin foil because the heat generated causes seperation to the shoes, I heard we need a special type material starting with an M, Myrno foil or something? Someone help me ?
I appreciate that boss and mylar film is what it’s called but with the fan going they won’t get hot and I have a thermometer in there to monitor it. Been doing it for years and never had a pair separate on me as well. While tinfoil does hold onto heat it is a cheaper alternative for a beginner. The film would be the next step up 🙌🏾
What kind of light is it?
Where did you get the light?
How much is the light?
All in the description of the video
Watch the damn video before asking this questions easy to just ask least you can do is watch
Dropped a like yesss
Use a box cutter bro next time
Had to sub brudda. Making my box tm😅
Appreciate that bro 😂 if you have any questions while you’re making it shoot me a DM on ig @btb_kicks and I got you
thank you
Np glad I could help
Use a grinder, yeah or a dremmel.
What u gon do with the extra ice box?
I do need to get rid of it before I graduate Lmk if you want it 😂
@@btbkicks yooo shii i want it🙋♂️😭
I was so scared yelling move your hand omg
Is it flamable?
Nah, what would catch on fire? 😂
the plastic mabye@@btbkicks
How much your light bill went up
Utilities were free at my spot 😂😂
@@btbkicks niceeee
Why not use double sided tape for the foil
I’ve tried it before it’s not as good
Does it need to be a certain wattage for it to work?
I started with 600W and noticed that as I went up in wattage the ices got better and I saw results faster.
@@btbkicks thanks!
I know this video is kinda old but couldn't you just use a carboard box instead of a plastic tote? Seems like a box would be easier to cut and would be cheaper.
@@LoopN fire hazard imo, my very first ice box ever was cardboard
@@btbkicks thanks for the reply. Also, I’ve heard others say they just use sunlight instead of a box. How well would this work? Have you tried it that way?
@@LoopNsunlight works perfect, but I use icebox in winter months where we don’t get much sunlight here
Why couldn't the light just sit on the clear lid
Wouldn’t get thru
@btbkicks oh okay, Thank You for responding.
7/31/23 i had this Angelus sole bright for months now. I have some 1's maroon, black white around the sole. Just put this stuff on 7:46 am. Man tedious trying not to get on the black part. Then they are sitting in my window but the sun is not getting all around. I will have to flip them. Its too much. Alot people are doing the bottom like no.
One tip that might help is using masking tape to cover the areas you want to avoid
Get sum safety glasses G. U gonna blind urself
I recently got some, I appreciate the concern 🙏🏾
For real that can happen?