Bear Creek Load Out Accurate No 2 -140gr RNFP
Вставка
- Опубліковано 30 лип 2024
- Bear Creek Giveaway video - • 1000K Subscribers + An...
Link to Giveaway - kingsumo.com/g/tsldct/bear-cr...
2 part series on EZ Dial for Dillon Presses - • EZ Dial for Dillon Pre...
Bear Creek Pricing Sheet - Pricing Sheet - www.bearcreeksupplybullets.co...
If local to Treasure Valley of Idaho, contact Jim at Treasure Valley Bullets as he is a Bear Creek Distributor. 208.949.3657. Make sure you tell him Idaho Reloader sent you!
Disclaimer: Reloading is and should be considered a dangerous process. Failure to follow written reloading data can result in injury or death. Always consult user manuals and published data before attempting. I am not sponsored or endorsed by any manufacturer shown in this video. - Навчання та стиль
I love Accurate No 2 in my AR-9. I used Everglades 114Grain Flat Nose at 1.090 with 4.4 Grains, and they work perfectly every time.
Lee Modern reloading shows lead for 9mm and 45acp that data works well for Me the bear creek can take velocity
very cool i always enjoy these
Great vid!!
Are you using an aftermarket barrel for the lead rounds, since Glock recommends not using lead rounds in their barrels?
Eventually yes. The lead bullets in Glock barrel saga has been going on for years. In truth, if you are using straight lead in the wrong mixture, without a coating the worse you will face is smeared lead in the grooves needing a more aggressive clean regularly. Thankfully with the coating on Bear Creek this never happens. After thousands of Bear Creek rounds down this barrel without issue, my own experience takes the cake. Always appreciate you watching!
@@IdahoReloader thank you for the explanation as I have some of the same Bullets from Treasure Valley Bullets that I haven’t loaded up just for only having the factory Glock 10mm barrel. I will try them out on Saturday. Thanks!
Jim at Treasure Valley Bullets is a stand up guy. He'd be more than happy to help answer any questions. Make sure you tell him I sent you. 👋