Lifetime Bayarea guy here and ex Club Homeboy member (I remember the newsletters). Dynofish, Vision Eyes, Ron Wilkerson, Eddie Fiola (I met Matt Hoffman when he like 14 and rode the Haro tours). I've always been a 24" rider, love 'em. In the early 70's (I'm 60 now) our only upgrade options were on Schwinn Stingrays. We'd put a rear tire on the front, spread out the bars and get someone to weld on a crossbar and homemade frame brackets or you could heat up the gooseneck and spread it open to slip in some motocross bars. Then came the Littlejohn Murphy with Motomags. In the 80's I stepped up to the 24s with a Race Inc. then a fully loaded Boss. Both with blue Tuff Wheels. I did the single father thing for 20 years and a couple of years ago I wanted to get back into cruising the half mile wheelies I loved so much. I looked at all the new stuff. Cult, Sunday, We The People, etc. I was surfing Craigslist and found a 2004 Redline Flight 24" Bubba Harris for $200. It was never ridden, still had the tire mold nub strings on original tires. It's all sealed bearings and I was surprised to find the Euro BB had 4 bearings. I'm upgrading it now (when do you ever stop?).I put on tuffs, Powerblock 2.10s, Stolen 4 piece bars, old style MX front brake (old guys like brakes) etc. I tried to get a Profile, White, Hornet freewheel but no one has anything but a Shimano, ACS or the cheap Lian Cheng stuff. I'll checkout the ROS availability. Anyway, from one old guy to the next, if you have a front brake and you're cruising a long wheelie, tap it and stop the front wheel spin. It looks a bit more cool. It's like getting extra pepperoni.
Or coasters where you'd remove the crank and flip the forks over so the bike is upside down and you'd be sitting your lil ass on the crank housing!!!!! Looking for the biggest hills in your nieghborhood
Awesome sound and engagement, I’m sold! The chain tension looks a bit tight however! I was taught the goal with the chain tension on a freewheel is to have just enough chain tension that when you coast or take your feet off the pedals you don’t want your cranks to keep turning (ghost pedaling) so that when you do any tricks the pedals stay in the same position that you left them. Maybe that’s no longer an issue with these better new freewheels sprockets, just putting that out there.
Great video explaining engagement on freewheels. Currently in the Phoenix area and planning on hitting up some bike shops. Hopefully some of the local bike shops in the area will have some big wheel bikes to check out. Thanks for the video!
Probably the only Jedi who noticed the stormtrooper chest piece. As always the vids are awesome and well done. Sounds killer like a faster snake now. Adding one to Jackie’s Ripper .. thanks Brother for doing what you do
I always use the Shimano MX30 16t. Super smooth and quiet. They coast for days.like my bikes quiet and stealth. Rip and Dip. Keep the videos coming. Awesome stuff.
My big ripper came with 36T x 16T freewheel..if I go up to a 17T freewheel will it make it a tad bit easier to pedal? I don’t want it to be TOO easy I just want it a LITTLE easier ..will a 17t do the trick ?
Thanks to you I was finally able to remove the freewheel. I have the tool but never crossed my mind to as a bolt on back side of tool to keep it from slipping off. Thanks a lot man.
Hello I ordered my new chain this morning when I was looking at my stock chain on my 2021 big flyer it didn’t look like it had a master link but my new KMC chain does should I have looked for a new chain without a master link is one better than the other... it was kind of dark this morning maybe I didn’t see the master link I’ll have to check when I get home from work LOL.Thanks again for all the help and always quick response
The new ones are just newer tech. I would run either one. I have the newer style without the master link and pins on my PK Ripper and that’s my main bike. The old style master link is also tried and true - it’s worked for years🤘
Is it possible to swap my (Red Mag)coaster parts out & put my (Black Mag)freewheel parts.? I don't want to modify the coaster brakes by taking out the brake pads...I would like to swap the guts entirely. 🤔
Hey boss great video!!! I need your help. Do you know if I could fits this freewheel on a 94gt performer fan mag?? If not do you recommend another freewheel that I can screw right on that’s loud??? Thanks in advance
If the wheel has a freewheel, it’ll work. If your wheel has a cassette hub, it won’t work. Best bet is ask a local shop to confirm. It’ll save you time and frustration 🤘
No doubt this is one of the best free wheels on the market especially for the price, great engagement and sound. LJ and Mattie did a great job. Also great video as always 👍 even though I haven’t finished 😂
I just recently upgraded both my Big Rippers from the stock 15t to now a 18t freewheel after seeing your other video about what upgreade options are best to do. 👍👍 I absolutely love it and its a much nicer ride and the Profile Elite freewheel just sounds so sexy! I ride down here in Tucson,AZ and you're not joking about our weather at all!! We do a Major Local ride out 130+ riders every Tuesday night if you're ever down south
For sure thats totally understandable! Just a heads up We meet up at the old main Flag pole on university of Arizona campus every Tuesday night and ride out around 8:45pm if you happen to make it down for a ride. Always a good time with fun people
Blessings brother 🙏 quick question my stock set up is 16 tooth rear and 36 up front what would be a good upgrade for me 🤔 the origin 17,18, or 19 or even 20 !? Please help 🙏 also wich set up would make it faster without changing the 36 tooth up front ?
A 17 in the rear will make it easier to pedal from a stop. Downside is you’ll spin your cranks faster and lose power at the faster speeds. I always prefer a lighter gear myself, because I’m not racing around town. I wouldn’t go higher than 17 in the rear bro
@@BigBikeBMX thanks so much for responding 🙏 so would it be best to just stick with the 16 tooth as I wanna hall ass thee entire time 🤙I have a pretty much stock world tour and just wanna bump it up a bit so actually might go with the profile elite I know a bit costly but 🤷🏽♂️ would a ride out supply be just as effective at a 100$ less sorry to bother as I am a skater who has now fallen in love with the big bike army 🙏
@@bombhillsnotcountries2284 if you have a cassette hub, you’ll need a new cog. If you have freewheel hubs - RideOutSupply freewheel is your best bet for loud and responsive without spending a ton of cash.
@@BigBikeBMX yeah gonna pick up the crew mag 6 wheel set and just figured upgrade the free wheel as well 🤷🏽♂️ ok so the ride out supply will do just fine huh ok thanks for your time , support and also thanks for the channel I will be sure to subscribe 🙏
@@BigBikeBMX ok further research shows that I have a cog set ould you recommend a good nice and loud cog set seems like a freewheel won't work or can it some how ? Sorry lots of dumb questions I'm a kookie nube 😅
Hey Isaac. Thanks for the content. Really appreciate it. I missed you a couple of weeks ago when you came to San Diego. Hopefully get the chance to meet you someday take care
On my 26” SuperCross I ride 33/16. If you like how easy it is to pedal now - get the 16 tooth. If you want an even easier gear - get a 17. Once you build up the leg strength for wheelies, you can go back to the 16 tooth. If you’re just cruising around, get the 16tooth
Finding a tool to fit the stock freewheel to remove it has been a pain in the ass. Which actual tool fits the Chinese made freewheel? Any help would be awesome!
What's the best 29er bmx on the market? Sunday high c.... cult devotion....gt pro performer/dyno compe....lastly the 27.5 fairdale taj? Im 6ft. And come from dirtbikes for 30 yrs....im addicted to wheelies and want the best big bmx money can buy..... pls any help? Ps. Will the 27.5 taj be too small for me? Or would a 29er be more comfortable?
If you can wait until bikes are in shops again, I'd suggest you do it. The brands you mention don't really invest heavily in the big BMX scene. They offer bikes, but they don't sponsor teams etc. SE Bikes, Throne, and Collective are the brands with actual teams and getting feedback from riders. The rest are just making cookie cutter big bikes. I'm always going to suggest an SE Big Ripper or Monster quad or Monster Dub if you're looking at a 29er. I personally love the PK Ripper 27.5 and ride mine 90% of the time. (I have a big ripper, OM Duro, and a PK Ripper). Sunday makes great bikes and I know a few folks who love them. Cult makes good bikes but I haven't ridden one. Dyno makes a really balanced and comfortable 29er. I'd probably ride a Dyno if I wasn't so happy with the SE lineup personally. Good luck man. The best bike is out there, you just have to ride them until you find the perfect fit.
What do you recommend for a 2018 sock flyer? I also would Locke a better sprocket. My sons bike is the red white and blue I just put red and blue pedals so looks along with the performance a red chain recommendation would
Love the video got a 2021 bigg ripper front sprocket is 36 back free wheel is 16 I'm stock on both hornet and ros. Can you guide me in the right direction as far as what brand and size new to the bike world thanks. P.s like to be able to pop wheelies easy.
You can do a 17 freewheel on the back and that’ll make the front tire pop up easier. You will lose speed with that gearing so once you get comfortable with wheelies - move back to the 16👍
What's the best sprocket gear combo for wheelies on a big ripper. ...(tooth count front/rear), can you add another gear to the other side of the rear hub and just flip your rim to switch it up??
SS396RAT it all comes down to how you plan to ride your bike. The 17 was slightly easier to pedal and get the wheel up for wheelies but you sacrifice long distance speed because you top out and end up hamster wheeling and not increasing speed. The 16 is a good middle between speed and wheelies. I can tell a difference yes, but I spend a lot of time on my bikes and I think about things like that while I’m riding. Normal rider will just notice it’s easier to pedal.
thank you so much, just installed a ros sprocket and ros freewheel on my big ripper , from stock 36/16 to ros 33/16 it is pretty loud and feels very nice and easier to pedal with the smaller sprocket as well, just 1 problem and that is ghost pedaling but a chain tensioner should do the job, the only tool i had to buy aside the ones i already had to remove the wheels were the FR6 freewheel remover, the ROS freewheel also comes with grease applied to it
@@BigBikeBMX was wondering if ghost pedaling was normal for a ride out supply freewheel because i never had it until i installed it, is there a fix you know of? thank you
@@michael_christian9461 I’d hit up RideOutSupply and let them know. Mine is still going strong and my son even wrecked a few times on the big ripper💁♂️
@@michael_christian9461 my RideOutSupply freewheels are perfect, no BS. They take a beating and stay smooth. I also live in Phoenix and it’s dusty. Still smooth as the day I filmed this👍
Hello my question is I ordered a ride out supply 17 tooth freewheel my original freewheel on my big flyer was 16 tooth . Do I have to get a bigger chain from adding one tooth on my freewheel.
I’m 48 just bought a new big flyer 2021 I used to ride a 20 inch boss With the I guess you would call them five piece bars that I still have with all the original Oakland stickers then I started riding a 24 inch red line but my 13-year-old daughter is 511 now so I decided to upgrade to a 29 inch and give her my 24 Thanks again for the informative videos
Isaac Awesome vids. I have a question. How do I know which or how, to fit a profile elite freewheel on my SE OM Duro? Every shop I ask seemed to be concerned where and how I spend my money instead of helping me.
WARZONE415 if you’re going single speed on it, I’d call Shaun at Phoenix Bike Co. He’s an expert at Profile hubs and He can offer suggestions. I wouldn’t even know where to start bro - Shaun is legit though🤘
Is there any performance difference between 15t 16t and the 17t freewheel because on my big ripper I have a stock 15t and I don't know how many teeth I should get when I get the ROS freewheel.
Here's what you'll get with a ROS freewheel. More engagement so any size will feel more responsive. The teeth size will make it easier to pedal as you increase teeth. 16 will be easier to pedal than the 15. etc. What you gain in easier to pedal you lose in top speed. Think of it like a 10 speed bike. Easy gear you pedal all day and barely move. Harder gear you press down and it takes you a long time to start moving but once you're going fast, it's easy. You'll want to decide what you're looking for in the gear ratio. I like a 33/17 on my big ripper because i can easily press down on the crank and the wheel pops right up and wheelies feel easier (to me). The trade off is that I tend to pedal more going on normal rides than someone next to me who has a 33/15. It's really up to you to decide what that performance means to you. Any size will benefit from the higher engagement though so it's worth it even if you go with the stock 33/15 gearing. Good luck. Great question.
So maybe I should get a 17t because I want to be able to pedal much easier when I wheelie but at the same time still be able to get enough speed to lift the wheel up.
@@jacobportelli4780 17 works best for me. Pro-Tip: Make sure you rear wheel takes a freewheel and not a cassette hub driver before you order. Some SE bikes have a cassette like my PK Ripper 27.5. My Big Ripper has a freewheel. Just verify before you order. Rideoutsupply.com has a fitting guide if you have questions or message them in Instagram to confirm. Good luck!
Do you happen to know if you can service the ROS freewheel like you can with the White or Profile? Sadly not much info out there on the ROS (yet)…have a Big Ripper from 14 that needs a freewheel to do some good wheelies
I didn’t see a link that looked different so I just used the chain tool and picked one link I got it off and got the new white chain on... BUT Why does KMC sell a white chain but the master link is silver it looks stupid.. do you think it would be OK to clean that one link pretty good and hit it with a little white Rustoleum paint
Hey man I have 29er GT Performer Im thinking about switching to white industries free wheel and I wanted to ask what size to get, what made you get 16T? Thanks for posting
I like the easier gearing for wheelies myself. I’d buy a cheap freewheel and see if you like it before investing in a white freewheel. They’re great quality, so make sure it’s perfect FOR YOU first🙏
Probably peace of mind. I rode 20” BMX bikes and thrashed them without ever knowing what a chain tensioner does. Just ride it. If you want extra security or bling, add them🤘
@Big Bike BMX I bought some and then sat there staring at them like why do I need them? Lol I'm just a street cruiser. Ordered the freewheel tho. Glad I found this video before I ordered the one you took out bc of excess drag and way cheaper.
Excellent video. Can you help me out I’m trying to find a 14 tooth freewheel for my big ripper. Do you know of anyone that manufactures them or has them? I wanted to run a different gear ratio on the flip flop SE hub for longer faster rides. Any input greatly appreciated!
Do most new bmx bikes use cassettes or freewheels. I haven't had a new bike since the late 90s and they were all free wheels pretty much. I am looking to by a new bike, what do you think of 22' in bikes. I want to still go to the skate park. I like 24 cruisers but I though 22 inch would be best of both worlds. This will be my only bike for riding around. Maybe $600 budget. I was looking at 29 but I would like to try all the different size bikes but don't have good shop by me
@@Atrainswrld big bikes are easier to wheelie sitting down for sure. If you're looking for a 22" bike - Stolen makes a great one and so does S&M bikes.
Hey bud, I’ve got the pk ripper 2020, same as you. I have heard you and others mention that it has a cassette not a free wheel on it, I’m not really understanding what that means, I’d like to make my bike as easy as poss to wheelie, is there a swap over for the rear cassette like a tighter freewheel like the one you just fit up to this bike or it’s not possible/expensive/hard
with a casette, the springs and engagement are inside the hub instead of inside the freewheel. You would have to swap the hub for a traditional hub/freewheel. You could talk to your local bike shop and have them look at lowering the front chainring and that would give you an easier gearing though.
Julian Ferguson if you have the extra funds, look at profile elite hubs. You’ll find them quite responsive for sure. I’m just not willing to fork over the insane money for them if I’m OK with the stock PK one. Make your bike yours, though. You’ll ride it more🤘
Went for a ride with the kids couple miles downhill to my brothers house pretty much all uphill on the way home turning on my street I heard a pop couldn’t tell where it came from the kids heard it to . .... HOPE it’s not my new ride out supply freewheel I did replace the chain but it was a KMC $13 white chain with a two piece master link have you heard of any problems like this ? It made me start looking at a half link KMC ..pin connection chain.. ... hoping it’s not my freewheel.. any input much appreciated
Makes me second-guess myself for not leaving it stock chain & freewheel but the freewheel sounds hell a good my brother said it sounds like a rattlesnake ..lol. &. the chain looks awesome white
My PK is what I ride daily. My sons ride a Duro XL and the big ripper. I enjoy doing little things to make each bike better though. I go with what I’m in the mood for and that’s usually the PK Ripper
RideOutSupply would be my choice for performance and sound. Origin8 is louder but has lots of drag meaning your tires will slow down faster and you’ll have to pedal harder
Can you recommend what size free wheel cassette I should run on my new skyway mags 20’i Am clueless I am building a gt dyno father and son project any help much appreciated
Check the hub and see if it's cassette or freewheel first. When I rode flatland on my 20" I ran 43front/16 rear. If it's a modern bmx frame it might need a bigger rear smaller front to fit the frame design on modern bikes. 44/16 was standard in the 80s and you said Tuffs so I'm assuming. Good luck.
Thanks once again I received my ride out supply freewheel and the One extra tooth didn’t make much difference in my stock chain . It worked just like you said also it was 1000 times easier to remove the freewheel by putting that nut back on the axle thanks for the video I do have a question it says my stock chain is a kmc s1 but I can’t find a size or thickness ? what chain do you recommend .. my chain worked perfect like you said I just think I want a white chain now... Thanks again for the great videos
Great question Jesse. I wanted to see the difference between the 15, 16, and 17. I get asked about it a lot personally so I wanted to be able to answer questions people have from an place of experience vs guessing. If I've ridden all three freewheel sizes I feel like I can answer the questions with more accuracy. Thanks man!
Hey brother thank you for the video. Do you know if that freewheel will fit on my stock 2021 Haro Pistol 29? I don't know what to look at on my bike to figure out if it's compatible. I'm basically new and don't know what to do :) Thanks again.
Hi Isaac i have a 2021 big flyer with 36t sprocket and 16t stock freewheel. I can lift the front wheel up but i found it very hard especially for the sitting down wheelie. In this moment i find only a 19t sturmey archer freewheel....is it a good option in yout opinion to make the bike easier to wheelie? another question what pressure do you reccomend for the Bozack tires... 30 psi front and rear is ok? thanks
Hey im a rookie with my Big Ripper, i was riding it today and it lost pressure in pedaling l, like when pedaling forward it freewheeled forward, whats wrong??? do i have to replace my free wheel?? or what or is it a simple fix???
I'm using the stock gearing on my City Grounds big flyer. I have the blue/teal camo. I'm 90% sure it's 33/16 but it's also 11pm and I'm tired. The SE website will have the exact specs at www.sebikes.com
RideOutSupply.com might be out. Any freewheel will fit the Big Ripper hub. It'll ask for size but they're asking for chain size. You want the 1/8 freewheel for your stock chain to work. Look for high engagement. If you can wait, I've heard rumors that you might find them in your local bike shops in the near future. I don't know though - just bike gossip.
Hi Issac. I have been doing some research on a Freewheel, the ROS appeals to me. I also like the Box Two design. I watched your abbreviated version of this video as well, both are well done brother. Hope you are keeping cool. Hey, I have a question thought about Hubs now. I have discovered that my Fixed Gear Miche Primato Pista/Pista is set up for a Fixed and Fixed on both sides of a 1.375/24 hub after the shop guy told me I have a Flip Flop Hub... two years later, I discover he Lied. Now, I'm looking at building/buying a new wheelset with Flip Flop Hubs to go with... I need to source out some half decent Hubs, Black, 32 Hole, High Flange with that 1.375/24 thread pattern so I can fit it with a Freewheel, like the one you have. I need some suggestions on what you might recommend, Would appreciate any input. Thanks and take care bud Ride On, Play Safe. 👍
Great video! Going to use this! I have been missing from this activity for 30 years,,, just have a question, I just purchased a 29 inch throne.seems like a strong bike, I just forgot the sounds a bike makes,,, when I'm pedaling every 2 or 3 cranks she makes a light pop in the chain....is this all because it's new or something faulty. .....thanks man love your wheelie tutorials.
It could be a few things. Chain tension is the first thing that comes to mind. I'd have your local bike shop take a look and make sure it's not too tight and that everything is lined up. Any bike you have should sound really smooth while pedaling regardless of brand. Mine was doing that on my big ripper and I loosened up the tension a little and it's back to quiet. Good luck.
NO!! you shouldn't use thread lock on anything on your bmx. especially the freewheel. The direction of travel when you pedal, tightens the freewheel, its never coming undone without a tool :-)
DookieStainz I’d love to go but COVID is still raging in AZ. I’m staying home this year. My homie 80s BMX Craig will be there meeting the big bike bmx family though
Finally got my first se bike Saturday . A new SE OM flyer blue and gold . After searching for weeks. I’m 42 5’9 230lbs. Don’t know if any of that matters lol. What do you suggest for A free wheel upgrade size.
Nic Ramos park tool FR-8 I believe. I have a RideOutSupply interview on the channel and we talk about the two tools you need. Fr8 for the 15 and I believe fr6 for the 16-17 tooth. I throw it up on the screen during the interview
Isaac, do you really feel as though your ride out supply freewheel engages quicker than the factory freewheel? I recently replaced mine with a 17th ride out supply freewheel and it doesn’t seem to engage any quick than the factory SE freewheel. Any thoughts?
The guys from ROS have fantastic customer service . They contacted me after I messaged you to tell me they’re going to send me another freewheel to try with less teeth. They believe I made such a big jump in size that what I’m feeling is not the gap but the quicker revolution.
HI Isaac. Hope all is well. Really enjoy your vids. It's inspired me to get back into BMX again. I'm in my 40's and just acquired a Stealth Blocks Flyer. I'd like to upgrade the stock 37t sprocket and 17t freewheel to an easier feel. Looking at the ROS freewheel you showcased. Do you know if it fits the Block flyer? I've tried searching for the stock flywheel threading/size with not luck. I'm looking to get either a 33T sprocket with a 16T freewheel or a 30T sproc/15T freewheel. I'm assuming a 30T with the stock 17t fw will have me spinning a bit? Any recommendations Many thanks
I’d drop one in the back with a freewheel and go from there. Ride that a few weeks and then consider the smaller from sprocket. That should get you going with a nice easy pull for wheelies🤘 - thanks for watching!
Awesome vids and excellent info and tips Issac. Really appreciate the vids and info you bring. What was the gear set set up you went with on the Camo SE/Cg Big Flyer ? And why did you choose that one ? If I remember correctly I believe you went with the 33t.
Lifetime Bayarea guy here and ex Club Homeboy member (I remember the newsletters). Dynofish, Vision Eyes, Ron Wilkerson, Eddie Fiola (I met Matt Hoffman when he like 14 and rode the Haro tours). I've always been a 24" rider, love 'em. In the early 70's (I'm 60 now) our only upgrade options were on Schwinn Stingrays. We'd put a rear tire on the front, spread out the bars and get someone to weld on a crossbar and homemade frame brackets or you could heat up the gooseneck and spread it open to slip in some motocross bars. Then came the Littlejohn Murphy with Motomags. In the 80's I stepped up to the 24s with a Race Inc. then a fully loaded Boss. Both with blue Tuff Wheels. I did the single father thing for 20 years and a couple of years ago I wanted to get back into cruising the half mile wheelies I loved so much. I looked at all the new stuff. Cult, Sunday, We The People, etc. I was surfing Craigslist and found a 2004 Redline Flight 24" Bubba Harris for $200. It was never ridden, still had the tire mold nub strings on original tires. It's all sealed bearings and I was surprised to find the Euro BB had 4 bearings. I'm upgrading it now (when do you ever stop?).I put on tuffs, Powerblock 2.10s, Stolen 4 piece bars, old style MX front brake (old guys like brakes) etc. I tried to get a Profile, White, Hornet freewheel but no one has anything but a Shimano, ACS or the cheap Lian Cheng stuff. I'll checkout the ROS availability. Anyway, from one old guy to the next, if you have a front brake and you're cruising a long wheelie, tap it and stop the front wheel spin. It looks a bit more cool. It's like getting extra pepperoni.
I loved this comment 🙏🔥
Me too...I can totally relate, we made chopper bikes before they were ever sold!!!
Or coasters where you'd remove the crank and flip the forks over so the bike is upside down and you'd be sitting your lil ass on the crank housing!!!!! Looking for the biggest hills in your nieghborhood
Awesome sound and engagement, I’m sold! The chain tension looks a bit tight however! I was taught the goal with the chain tension on a freewheel is to have just enough chain tension that when you coast or take your feet off the pedals you don’t want your cranks to keep turning (ghost pedaling) so that when you do any tricks the pedals stay in the same position that you left them. Maybe that’s no longer an issue with these better new freewheels sprockets, just putting that out there.
Great video explaining engagement on freewheels. Currently in the Phoenix area and planning on hitting up some bike shops. Hopefully some of the local bike shops in the area will have some big wheel bikes to check out. Thanks for the video!
Average Joes Bike Shop in Scottsdale has all the high-end stuff for BMX
Probably the only Jedi who noticed the stormtrooper chest piece.
As always the vids are awesome and well done. Sounds killer like a faster snake now. Adding one to Jackie’s Ripper .. thanks Brother for doing what you do
Rick Monster636 it’s a great upgrade. Definitely makes the gearing easier🤘
I always use the Shimano MX30 16t. Super smooth and quiet. They coast for days.like my bikes quiet and stealth. Rip and Dip. Keep the videos coming. Awesome stuff.
Check out Onyx hubs. Instant engagement and zero sound.
I just bought a big ripper. They are so hard to find right now. Looking forward to upgrades.
jan tan it’ll get better as supplies get back to normal
@@BigBikeBMX is it better to get a 15T for big ripper
Everyone needs to subscribe to this channel Isaac has answered every question I’ve asked him in record time...Much appreciated
🙏🙏
My big ripper came with 36T x 16T freewheel..if I go up to a 17T freewheel will it make it a tad bit easier to pedal? I don’t want it to be TOO easy I just want it a LITTLE easier ..will a 17t do the trick ?
17 will feel like heaven. It’s easier without loosing too much top end speed
Thanks to you I was finally able to remove the freewheel. I have the tool but never crossed my mind to as a bolt on back side of tool to keep it from slipping off. Thanks a lot man.
Best bike-hack I’ve ever learned🤘
Have a 2021 big ripper . What specific tool or socket do I need to remove the stock freewheel ?
Thanks
Hello I ordered my new chain this morning when I was looking at my stock chain on my 2021 big flyer it didn’t look like it had a master link but my new KMC chain does should I have looked for a new chain without a master link is one better than the other... it was kind of dark this morning maybe I didn’t see the master link I’ll have to check when I get home from work LOL.Thanks again for all the help and always quick response
The new ones are just newer tech. I would run either one. I have the newer style without the master link and pins on my PK Ripper and that’s my main bike. The old style master link is also tried and true - it’s worked for years🤘
On the stock one on my big flyer without the master link do I need to look for a different looking pin to push out or just pick anyone
@@pawlovich1 there’s one link that’s different. Bend the chain at that link and it’ll pop off.
Is it possible to swap my (Red Mag)coaster parts out & put my (Black Mag)freewheel parts.? I don't want to modify the coaster brakes by taking out the brake pads...I would like to swap the guts entirely. 🤔
Hey boss great video!!! I need your help. Do you know if I could fits this freewheel on a 94gt performer fan mag?? If not do you recommend another freewheel that I can screw right on that’s loud??? Thanks in advance
If the wheel has a freewheel, it’ll work. If your wheel has a cassette hub, it won’t work. Best bet is ask a local shop to confirm. It’ll save you time and frustration 🤘
I have put on my new ride out supply freewheel and the one and only problem I have with it is that it ghost pedals so is there a way to fix it.
You can try adjusting the chain tension but ghost pedaling is a common issue with stronger spring freewheels that are loud💁♂️
No doubt this is one of the best free wheels on the market especially for the price, great engagement and sound. LJ and Mattie did a great job. Also great video as always 👍 even though I haven’t finished 😂
thanks, brother! I appreciate you always watching
I love how you always get into details, good video!
Thanks for watching! Appreciate it bro🙏🤘
I just recently upgraded both my Big Rippers from the stock 15t to now a 18t freewheel after seeing your other video about what upgreade options are best to do. 👍👍 I absolutely love it and its a much nicer ride and the Profile Elite freewheel just sounds so sexy! I ride down here in Tucson,AZ and you're not joking about our weather at all!! We do a Major Local ride out 130+ riders every Tuesday night if you're ever down south
Larry Hoskinson that’s awesome! I’ll come check it out once the weather cools down and the Covid lets up a bit
For sure thats totally understandable! Just a heads up We meet up at the old main Flag pole on university of Arizona campus every Tuesday night and ride out around 8:45pm if you happen to make it down for a ride. Always a good time with fun people
Larry Hoskinson I’ll reach out before I drive down.
@@BigBikeBMX for sure, it would be really cool to have you join the ride sometime
Where Do I find those tensioners? I have a big ripper I have been looking for something to use on the wheel.
Most bike shops stock them. SE website sells them too.
I love those seat posts. Where can I get one?
I have a new monster quad 20 tooth was thinking about the ROS 17 tooth. What do you recommend?
I believe the monster quad has a cassette hub. You’ll want a 17tooth driver/cog. Your local bike shop can help. You’ll need a chain whip tool.
@@BigBikeBMX thank you so much
@@roberttillman2326 you bet! I’ve seen folks try and thread it on not knowing. Good news is, a cog is cheaper.
I have a 2020 se big ripper I try to use the 4 prongs and it didn't fit. do I need a 2 prongs to remove it... please help ,Gilbert AZ
Park Tool FR8 fits the 15tooth freewheel. The Park Tool FR6 fits the 16-17 tooth freewheel.
Thank you...
@@BigBikeBMX thank you so much problem solved.. I really enjoy your videos... you should come ride with us instagram at BMX Ballers
thomas teater I’ll be out soon. Once this pandemic is over🤘
this Saturday 08/22/2020 we meet at 1614 W. Roosevelt Rd Phoenix AZ 85007 meet up @ 7:30 pm hope to see you there...
Blessings brother 🙏 quick question my stock set up is 16 tooth rear and 36 up front what would be a good upgrade for me 🤔 the origin 17,18, or 19 or even 20 !? Please help 🙏 also wich set up would make it faster without changing the 36 tooth up front ?
A 17 in the rear will make it easier to pedal from a stop. Downside is you’ll spin your cranks faster and lose power at the faster speeds.
I always prefer a lighter gear myself, because I’m not racing around town. I wouldn’t go higher than 17 in the rear bro
@@BigBikeBMX thanks so much for responding 🙏 so would it be best to just stick with the 16 tooth as I wanna hall ass thee entire time 🤙I have a pretty much stock world tour and just wanna bump it up a bit so actually might go with the profile elite I know a bit costly but 🤷🏽♂️ would a ride out supply be just as effective at a 100$ less sorry to bother as I am a skater who has now fallen in love with the big bike army 🙏
@@bombhillsnotcountries2284 if you have a cassette hub, you’ll need a new cog. If you have freewheel hubs - RideOutSupply freewheel is your best bet for loud and responsive without spending a ton of cash.
@@BigBikeBMX yeah gonna pick up the crew mag 6 wheel set and just figured upgrade the free wheel as well 🤷🏽♂️ ok so the ride out supply will do just fine huh ok thanks for your time , support and also thanks for the channel I will be sure to subscribe 🙏
@@BigBikeBMX ok further research shows that I have a cog set ould you recommend a good nice and loud cog set seems like a freewheel won't work or can it some how ? Sorry lots of dumb questions I'm a kookie nube 😅
Any other cool freewheels besides this one? ROS freewheels are sold out.
Hey Isaac. Thanks for the content. Really appreciate it.
I missed you a couple of weeks ago when you came to San Diego. Hopefully get the chance to meet you someday take care
Bro!!! Had a blast in SD! I’ll be back real soon🤘
@@BigBikeBMXI hope so. Looking forward to it. Fish tacos on me. 😁
What’s with the plastic spoke benders still on the bike?😃
Hello brotha my Gt pro series came with a 33t sprocket and 16t freewheel. Should I stick with the 16t when upgrading to ROS freewheel
On my 26” SuperCross I ride 33/16. If you like how easy it is to pedal now - get the 16 tooth. If you want an even easier gear - get a 17.
Once you build up the leg strength for wheelies, you can go back to the 16 tooth.
If you’re just cruising around, get the 16tooth
@@BigBikeBMX thank u for the feedback
@@NikeChecksHtx yeah man! Thanks for watching 🙏
@@BigBikeBMX will I need to switch the chain if I got from a 33t sprocket to a 36t sprocket?
Finding a tool to fit the stock freewheel to remove it has been a pain in the ass. Which actual tool fits the Chinese made freewheel? Any help would be awesome!
Jason Patterson same one that fits most 15 tooth freewheels - the Industry standard park tool FR 8.
@@BigBikeBMX Thank you i have it on order and looking forward to giving my Ride Out Supply 16T a try.
Jason Patterson you’ll also want a FR6 for the 16-17 freewheels. It’s annoying but part of the bike business.
@@BigBikeBMX Yes Sir i have the FR-6 and new Freewheel and my Buff 19" patiently waiting for the mail delivery LOL
why was the frame redesigned in 2021 ? are the older ones better ?
What's the best 29er bmx on the market? Sunday high c.... cult devotion....gt pro performer/dyno compe....lastly the 27.5 fairdale taj? Im 6ft. And come from dirtbikes for 30 yrs....im addicted to wheelies and want the best big bmx money can buy..... pls any help? Ps. Will the 27.5 taj be too small for me? Or would a 29er be more comfortable?
If you can wait until bikes are in shops again, I'd suggest you do it. The brands you mention don't really invest heavily in the big BMX scene. They offer bikes, but they don't sponsor teams etc. SE Bikes, Throne, and Collective are the brands with actual teams and getting feedback from riders. The rest are just making cookie cutter big bikes. I'm always going to suggest an SE Big Ripper or Monster quad or Monster Dub if you're looking at a 29er. I personally love the PK Ripper 27.5 and ride mine 90% of the time. (I have a big ripper, OM Duro, and a PK Ripper). Sunday makes great bikes and I know a few folks who love them. Cult makes good bikes but I haven't ridden one. Dyno makes a really balanced and comfortable 29er. I'd probably ride a Dyno if I wasn't so happy with the SE lineup personally. Good luck man. The best bike is out there, you just have to ride them until you find the perfect fit.
What do you recommend for a 2018 sock flyer? I also would Locke a better sprocket. My sons bike is the red white and blue I just put red and blue pedals so looks along with the performance a red chain recommendation would
Love the video got a 2021 bigg ripper front sprocket is 36 back free wheel is 16 I'm stock on both hornet and ros. Can you guide me in the right direction as far as what brand and size new to the bike world thanks. P.s like to be able to pop wheelies easy.
You can do a 17 freewheel on the back and that’ll make the front tire pop up easier. You will lose speed with that gearing so once you get comfortable with wheelies - move back to the 16👍
What's the best sprocket gear combo for wheelies on a big ripper. ...(tooth count front/rear), can you add another gear to the other side of the rear hub and just flip your rim to switch it up??
I like 33/16 on the big ripper/flyer. You can add another freewheel if you have a flip-flop hub with threads on both sides
Great video Isaac! Appreciate you sharing and making these comprehensive.
Sorry for asking so many questions but do u know where u got the hornet freewheel 17t 1/8
Got it from Phoenix Bike Co.
It’s so good I got the hornet just today I got it at Amazon
So what's a better ride the 16 or 17? Or can you tell the difference 🤔
SS396RAT it all comes down to how you plan to ride your bike. The 17 was slightly easier to pedal and get the wheel up for wheelies but you sacrifice long distance speed because you top out and end up hamster wheeling and not increasing speed. The 16 is a good middle between speed and wheelies. I can tell a difference yes, but I spend a lot of time on my bikes and I think about things like that while I’m riding. Normal rider will just notice it’s easier to pedal.
@@BigBikeBMX gotcha
thank you so much, just installed a ros sprocket and ros freewheel on my big ripper , from stock 36/16 to ros 33/16 it is pretty loud and feels very nice and easier to pedal with the smaller sprocket as well, just 1 problem and that is ghost pedaling but a chain tensioner should do the job, the only tool i had to buy aside the ones i already had to remove the wheels were the FR6 freewheel remover, the ROS freewheel also comes with grease applied to it
Gearing changes are fun. Makes your bike feel like new
@@BigBikeBMX was wondering if ghost pedaling was normal for a ride out supply freewheel because i never had it until i installed it, is there a fix you know of? thank you
when i am coasting ,with my feet off the pedals the cranks or freewheel still goes forward until i am at a complete stop
@@minks.solenoid check chain tension. Sometimes loose or tight can make a difference.
@@BigBikeBMX thank you
Where can i buy the freewheel tool remover
Any bikeshop or Amazon carries them. Good luck
Thanks mate, great insight in to that freewheel. As soon as they’re back in stock, I’m ordering one.
Cheers
they are in stock now
is it even worth buying this and switching from the stock big ripper freewheel
I think so. The engagement points are what I appreciate the most about them🤘
@@BigBikeBMX hows it holding up cause i bought a few and after 2 weeks i hear a loud bang and then they starte engaging really late.
@@michael_christian9461 I’d hit up RideOutSupply and let them know. Mine is still going strong and my son even wrecked a few times on the big ripper💁♂️
@@BigBikeBMX i should have specified i bought other cheaper ones was just curious how well the ride out supply one holds up im tired of cheap ones
@@michael_christian9461 my RideOutSupply freewheels are perfect, no BS. They take a beating and stay smooth. I also live in Phoenix and it’s dusty. Still smooth as the day I filmed this👍
Every rider should have a bike work stand. I got a park tool stand for xmas back on 97
I finally got one this year🤘🤘
Absolutely! Well worth the money! 💯💯💯💯
Hello my question is I ordered a ride out supply 17 tooth freewheel my original freewheel on my big flyer was 16 tooth . Do I have to get a bigger chain from adding one tooth on my freewheel.
I used the same chain on my 2019 Big Ripper with my 17 tooth. Should be good👍
@@BigBikeBMX Thanks a lot for the quick response and the great videos
I’m 48 just bought a new big flyer 2021 I used to ride a 20 inch boss With the I guess you would call them five piece bars that I still have with all the original Oakland stickers then I started riding a 24 inch red line but my 13-year-old daughter is 511 now so I decided to upgrade to a 29 inch and give her my 24 Thanks again for the informative videos
Brother i got the latest big ripper purple rain, wanting to add gears is this possible or not worth it?
Isaac Awesome vids. I have a question. How do I know which or how, to fit a profile elite freewheel on my SE OM Duro? Every shop I ask seemed to be concerned where and how I spend my money instead of helping me.
WARZONE415 if you’re going single speed on it, I’d call Shaun at Phoenix Bike Co. He’s an expert at Profile hubs and He can offer suggestions. I wouldn’t even know where to start bro - Shaun is legit though🤘
Is there any performance difference between 15t 16t and the 17t freewheel because on my big ripper I have a stock 15t and I don't know how many teeth I should get when I get the ROS freewheel.
Here's what you'll get with a ROS freewheel. More engagement so any size will feel more responsive. The teeth size will make it easier to pedal as you increase teeth. 16 will be easier to pedal than the 15. etc. What you gain in easier to pedal you lose in top speed. Think of it like a 10 speed bike. Easy gear you pedal all day and barely move. Harder gear you press down and it takes you a long time to start moving but once you're going fast, it's easy.
You'll want to decide what you're looking for in the gear ratio. I like a 33/17 on my big ripper because i can easily press down on the crank and the wheel pops right up and wheelies feel easier (to me). The trade off is that I tend to pedal more going on normal rides than someone next to me who has a 33/15. It's really up to you to decide what that performance means to you. Any size will benefit from the higher engagement though so it's worth it even if you go with the stock 33/15 gearing. Good luck. Great question.
So maybe I should get a 17t because I want to be able to pedal much easier when I wheelie but at the same time still be able to get enough speed to lift the wheel up.
@@jacobportelli4780 17 works best for me. Pro-Tip: Make sure you rear wheel takes a freewheel and not a cassette hub driver before you order. Some SE bikes have a cassette like my PK Ripper 27.5. My Big Ripper has a freewheel. Just verify before you order. Rideoutsupply.com has a fitting guide if you have questions or message them in Instagram to confirm. Good luck!
@@BigBikeBMX yep I have checked and it is a 15 t freewheel
@@BigBikeBMX really good question!! And really good fawkin answer!👏 GUUDSHEEIT
hey isaac! i was wondering if you had made a video on upgrading your bottom bracket? let me knoww thanks
Ethan Reyes` not yet but I have one planned very soon🤘
Do you happen to know if you can service the ROS freewheel like you can with the White or Profile? Sadly not much info out there on the ROS (yet)…have a Big Ripper from 14 that needs a freewheel to do some good wheelies
I didn’t see a link that looked different so I just used the chain tool and picked one link I got it off and got the new white chain on...
BUT Why does KMC sell a white chain but the master link is silver it looks stupid.. do you think it would be OK to clean that one link pretty good and hit it with a little white Rustoleum paint
For the hornet freewheel did u get the 3/32 or 1/8
I have the stock chain so 1/8👍
What size was your origin 8 freewheel
17 tooth
@@BigBikeBMX would a 17t 3/32” fit my dog town big ripper ?
@@cyla-yt6069 I’ll buy the dog town from u
I’m running a 32:16 right now. Thinking about getting the 15t ros freewheel. Will this make a huge difference?
How did it go? What did you end up doing?
That red & gold really pops 💗
Hey man I have 29er GT Performer Im thinking about switching to white industries free wheel and I wanted to ask what size to get, what made you get 16T?
Thanks for posting
I like the easier gearing for wheelies myself. I’d buy a cheap freewheel and see if you like it before investing in a white freewheel. They’re great quality, so make sure it’s perfect FOR YOU first🙏
Recommend a freecoaster for a Om flyer
Whats the point of the chain tensioner if you just pull it back with your hand and tighten?
Probably peace of mind. I rode 20” BMX bikes and thrashed them without ever knowing what a chain tensioner does. Just ride it. If you want extra security or bling, add them🤘
@Big Bike BMX I bought some and then sat there staring at them like why do I need them? Lol I'm just a street cruiser. Ordered the freewheel tho. Glad I found this video before I ordered the one you took out bc of excess drag and way cheaper.
Coming to cali for the SEhoedown this weekend?
Excellent video. Can you help me out I’m trying to find a 14 tooth freewheel for my big ripper. Do you know of anyone that manufactures them or has them? I wanted to run a different gear ratio on the flip flop SE hub for longer faster rides. Any input greatly appreciated!
5446moto I would ask Shaun from Phoenix Bike Co. Google them and call the shop. That dude is the king of wheel builds and would know🤘
My freewheel on my 2018 blocks flyer is stuck what should I do ?
If it were mine, I’d do the tire iron trick from my other videos. Or take it to a local shop and let them fight with it🤘
Do most new bmx bikes use cassettes or freewheels. I haven't had a new bike since the late 90s and they were all free wheels pretty much. I am looking to by a new bike, what do you think of 22' in bikes. I want to still go to the skate park. I like 24 cruisers but I though 22 inch would be best of both worlds. This will be my only bike for riding around. Maybe $600 budget. I was looking at 29 but I would like to try all the different size bikes but don't have good shop by me
Are 29 inches way easier to sit down wheely? I've never been good at it.
@@Atrainswrld big bikes are easier to wheelie sitting down for sure. If you're looking for a 22" bike - Stolen makes a great one and so does S&M bikes.
Thanks. I was actually looking at the stolen 22. I have to talk the wife into letting me use the 600 stimulus check on it lol
I wonder if they make one for 30mm hub
Josh Beck ask them. They’re good people
Does the ros freewheel still have a lot of engagement even though it has less drag?
It has the same engagement as the Hornet🤘
Hey bud, I’ve got the pk ripper 2020, same as you. I have heard you and others mention that it has a cassette not a free wheel on it, I’m not really understanding what that means, I’d like to make my bike as easy as poss to wheelie, is there a swap over for the rear cassette like a tighter freewheel like the one you just fit up to this bike or it’s not possible/expensive/hard
with a casette, the springs and engagement are inside the hub instead of inside the freewheel. You would have to swap the hub for a traditional hub/freewheel. You could talk to your local bike shop and have them look at lowering the front chainring and that would give you an easier gearing though.
Isaac Irvine ah yep ok. Damn. I used to ride a Fixie, so I’m used to having that solid crank feel constantly . Hmm. Thanks for the prompt reply !
Julian Ferguson if you have the extra funds, look at profile elite hubs. You’ll find them quite responsive for sure. I’m just not willing to fork over the insane money for them if I’m OK with the stock PK one. Make your bike yours, though. You’ll ride it more🤘
Isaac Irvine that banner tho 🔥🤘🏼
Went for a ride with the kids couple miles downhill to my brothers house pretty much all uphill on the way home turning on my street I heard a pop couldn’t tell where it came from the kids heard it to . ....
HOPE it’s not my new ride out supply freewheel I did replace the chain but it was a KMC $13 white chain with a two piece master link have you heard of any problems like this ? It made me start looking at a half link KMC ..pin connection chain.. ... hoping it’s not my freewheel..
any input much appreciated
Makes me second-guess myself for not leaving it stock chain & freewheel but the freewheel sounds hell a good my brother said it sounds like a rattlesnake ..lol. &. the chain looks awesome white
If I want to pedal faster and my big flyer has a 16t free wheel would I get a 17T?
A 17 will make it easier to pedal from a stop. You’ll lose your top end speed though. Think of it like 1st gear in a car.
what is your daily driver? i thought was gonna b pk ripper. can u explain how u chose ur daily?
My PK is what I ride daily. My sons ride a Duro XL and the big ripper. I enjoy doing little things to make each bike better though. I go with what I’m in the mood for and that’s usually the PK Ripper
Questions is that a 29in bike if so can you send me the part # so I can order one for my bike.
How long did ros take to ship
It all comes down to how many orders they have. It’s usually 1-3 weeks, but if they get backed up, they stop taking orders.
Whats the loudest freewheel i can buy for less than $60?
RideOutSupply would be my choice for performance and sound. Origin8 is louder but has lots of drag meaning your tires will slow down faster and you’ll have to pedal harder
Can you recommend what size free wheel cassette I should run on my new skyway mags 20’i Am clueless
I am building a gt dyno father and son project any help much appreciated
Check the hub and see if it's cassette or freewheel first. When I rode flatland on my 20" I ran 43front/16 rear. If it's a modern bmx frame it might need a bigger rear smaller front to fit the frame design on modern bikes. 44/16 was standard in the 80s and you said Tuffs so I'm assuming. Good luck.
Thanks once again I received my ride out supply freewheel and the One extra tooth didn’t make much difference in my stock chain . It worked just like you said also it was 1000 times easier to remove the freewheel by putting that nut back on the axle thanks for the video
I do have a question it says my stock chain is a kmc s1 but I can’t find a size or thickness ? what chain do you recommend .. my chain worked perfect like you said I just think I want a white chain now... Thanks again for the great videos
The stock chain is 1 1/8. Most single rear gear bikes (BMX style bikes) use the same size👍
How come you chose a 16t and not a 17t this time?
Great question Jesse. I wanted to see the difference between the 15, 16, and 17. I get asked about it a lot personally so I wanted to be able to answer questions people have from an place of experience vs guessing. If I've ridden all three freewheel sizes I feel like I can answer the questions with more accuracy. Thanks man!
Hey brother thank you for the video. Do you know if that freewheel will fit on my stock 2021 Haro Pistol 29? I don't know what to look at on my bike to figure out if it's compatible. I'm basically new and don't know what to do :)
Thanks again.
Thanks man! I honestly don’t know much about the Pistol yet. I’d hit up RideOutSupply direct on Instagram and see what they say🤘🙏
Hi Isaac i have a 2021 big flyer with 36t sprocket and 16t stock freewheel. I can lift the front wheel up but i found it very hard especially for the sitting down wheelie. In this moment i find only a 19t sturmey archer freewheel....is it a good option in yout opinion to make the bike easier to wheelie? another question what pressure do you reccomend for the Bozack tires... 30 psi front and rear is ok? thanks
Hey im a rookie with my Big Ripper, i was riding it today and it lost pressure in pedaling l, like when pedaling forward it freewheeled forward, whats wrong??? do i have to replace my free wheel?? or what or is it a simple fix???
That’s not normal. I’d show it to your local bike shop. The shop you bought it from can help warranty it if it’s bad👍
Hey Isaac, what freewheel would you recommend for a big flyer with a 33t sproket. I was thinking 16t
I'm using the stock gearing on my City Grounds big flyer. I have the blue/teal camo. I'm 90% sure it's 33/16 but it's also 11pm and I'm tired. The SE website will have the exact specs at www.sebikes.com
Hey bro. I’m looking for this freewheel can’t find it on website? Can u help me out? Or any others that will work on big ripper. Thanks bro
RideOutSupply.com might be out. Any freewheel will fit the Big Ripper hub. It'll ask for size but they're asking for chain size. You want the 1/8 freewheel for your stock chain to work. Look for high engagement. If you can wait, I've heard rumors that you might find them in your local bike shops in the near future. I don't know though - just bike gossip.
Hi Issac. I have been doing some research on a Freewheel, the ROS appeals to me. I also like the Box Two design. I watched your abbreviated version of this video as well, both are well done brother. Hope you are keeping cool.
Hey, I have a question thought about Hubs now.
I have discovered that my Fixed Gear Miche Primato Pista/Pista is set up for a Fixed and Fixed on both sides of a 1.375/24 hub after the shop guy told me I have a Flip Flop Hub... two years later, I discover he Lied. Now, I'm looking at building/buying a new wheelset with Flip Flop Hubs to go with...
I need to source out some half decent Hubs, Black, 32 Hole, High Flange with that 1.375/24 thread pattern so I can fit it with a Freewheel, like the one you have.
I need some suggestions on what you might recommend, Would appreciate any input. Thanks and take care bud Ride On, Play Safe. 👍
Hey Joel, I’m just using a stock SE hub.
What aftermarket chain working for the ride out flywheel
Was the ride out supply freewheel 3/32 ?
Look at the SE website and it’ll give you the stock chain kmc s1. Google that and it’ll tell you it’s 1 1/8. 🤘
Great video! Going to use this! I have been missing from this activity for 30 years,,, just have a question, I just purchased a 29 inch throne.seems like a strong bike, I just forgot the sounds a bike makes,,, when I'm pedaling every 2 or 3 cranks she makes a light pop in the chain....is this all because it's new or something faulty. .....thanks man love your wheelie tutorials.
It could be a few things. Chain tension is the first thing that comes to mind. I'd have your local bike shop take a look and make sure it's not too tight and that everything is lined up. Any bike you have should sound really smooth while pedaling regardless of brand. Mine was doing that on my big ripper and I loosened up the tension a little and it's back to quiet. Good luck.
Hi I have a big ripper and I’m looking at the orgin 8 should I get a 16 t 1/8 or 16t 3/32
The 1/8 and 3/32 are talking about chain width. 1/8 is for non-geared single-speed bikes. Good luck 🤘
@@BigBikeBMX hi how are you. Unfortunately they are out of stock what freewheels do u recommend for a big ripper
@@Nick-gx4rf RideOutSupply.com is what I ride
@@BigBikeBMX yes I know I was looking for that one but they don’t sell anymore do you know any other ones
@@BigBikeBMX I’m trying to find a good one to get because the one I have now every time I pedal it makes a un normal clicking sound
Do you think ride out Supply will get more in stock 😎
Absolutely they’ll get more. Keep an eye on their Instagram account. That’s where they announce new products and restocked parts.
@@BigBikeBMX thanks 👊
Should I use thread lock on the freewheel when installing?
NO!! you shouldn't use thread lock on anything on your bmx. especially the freewheel. The direction of travel when you pedal, tightens the freewheel, its never coming undone without a tool :-)
@@futile2006 thanks for letting me know!
Which freewheel tool is that? FR6 fr6c? Thanks
FR6 off Amazon 👍
You going to be at the Santa Cruz Rideout in a couple weeks
DookieStainz I’d love to go but COVID is still raging in AZ. I’m staying home this year. My homie 80s BMX Craig will be there meeting the big bike bmx family though
Did you change the pk too
John Doe great question. The PK has a cassette hub so it doesn’t have a traditional freewheel. The PK is stock.👍
Love the old skool vibe videos
Thanks for watching 🙏
Finally got my first se bike Saturday . A new SE OM flyer blue and gold . After searching for weeks. I’m 42 5’9 230lbs. Don’t know if any of that matters lol. What do you suggest for A free wheel upgrade size.
Would this freewheel work on a gt dyno
It works with any hub that accepts a freewheel. Not sure if it has cassette hubs or not. Freewheels don’t work on cassette hubs
You coming up to New York for the everybody’s ride out “. ?
Sick hair bro..........motion sickness alert @ 15:21 🤮🤮........Another awesome video keep them coming!!!!
what is the itemized list of tools used in this video? also what size sprocket are you running on this particular bike?
How many tooth are on my stock big ripper
What bike would recommend for me I'm 6 ft 3
Big ripper or big flyer with 9-10 inch bars. My buddy Matt Rickard from SE Bikes is 6’5 and he rides a big ripper with 10 inch handlebars
@@BigBikeBMX thnx
Yo what tool you use to remove the stock freewheel? I bought a couple and they didn’t fit.
Nic Ramos park tool FR-8 I believe. I have a RideOutSupply interview on the channel and we talk about the two tools you need. Fr8 for the 15 and I believe fr6 for the 16-17 tooth.
I throw it up on the screen during the interview
@@BigBikeBMX Sick! thanks for the reply mang!
What freewheel goes on a so cal flyer 24”
Head over to SE Bikes and look up your bike. In the Specifications section it will list your freewheel tooth size under wheels. 👍
Isaac, do you really feel as though your ride out supply freewheel engages quicker than the factory freewheel? I recently replaced mine with a 17th ride out supply freewheel and it doesn’t seem to engage any quick than the factory SE freewheel. Any thoughts?
Craving Knowledge yes. You triple the engagement points by upgrading to ROS. It was very noticeable
The guys from ROS have fantastic customer service . They contacted me after I messaged you to tell me they’re going to send me another freewheel to try with less teeth. They believe I made such a big jump in size that what I’m feeling is not the gap but the quicker revolution.
HI Isaac. Hope all is well. Really enjoy your vids. It's inspired me to get back into BMX again. I'm in my 40's and just acquired a Stealth Blocks Flyer. I'd like to upgrade the stock 37t sprocket and 17t freewheel to an easier feel. Looking at the ROS freewheel you showcased. Do you know if it fits the Block flyer? I've tried searching for the stock flywheel threading/size with not luck.
I'm looking to get either a 33T sprocket with a 16T freewheel or a 30T sproc/15T freewheel. I'm assuming a 30T with the stock 17t fw will have me spinning a bit? Any recommendations
Many thanks
I’d drop one in the back with a freewheel and go from there. Ride that a few weeks and then consider the smaller from sprocket. That should get you going with a nice easy pull for wheelies🤘 - thanks for watching!
Where do i buy a 16t from?
Awesome vids and excellent info and tips Issac. Really appreciate the vids and info you bring. What was the gear set set up you went with on the Camo SE/Cg Big Flyer ? And why did you choose that one ? If I remember correctly I believe you went with the 33t.
The Camo CG is stock gearing. It's easy to get the wheel up on that bike with the stock gears.
@@BigBikeBMX thank you my man appreciate the help.
Where can I get a rear bike rim se bike
They sell them at SE dealers👍