How To Hang Mosaic Art / Hanging Picture Hardware
Вставка
- Опубліковано 5 сер 2019
- In this video I will show you five options that you can choose from that best suits your mosaic substrate. PLEASE NOTE: I have shown you how to use the French Cleat system incorrectly in this video.
Marmox and Wedi Board hanging Hardware kits are available from the following online stockists.
www.smaltiaustralia.com
www.ozmosaics.com.au
=====================================
As an Amazon Associate I earn from qualifying purchases. (At no extra cost to you)
This helps to keep the channel going. Thankyou. :)
My Amazon Store where I list products that I use or similar products that I use
www.amazon.com/shop/treasuryroad
=====================================
For business enquiries on reviewing products or for sponsorship please send an email, the email address is in the about page of this channel.
=====================================
Donation Link - Helps to keep the channel going with materials and equipment - Thankyou
ko-fi.com/treasuryroad
=======================================
Disclaimer
Videos produced by Treasury Road and all material provided within this website is for informational, educational, & entertainment purposes only. The video and all included information does in no way constitute the provision of professional advice.
Some of these projects, materials, and techniques may not be appropriate for all ages. Treasury Road does not guarantee or make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information provided by this site. Users should seek appropriate independent professional advice prior to relying on, or entering into any commitment based on material published here, which material is purely published for reference purposes alone.
You agree that use of this information is at your own risk and Treasury Road cannot be held liable for any losses, liabilities, injuries or damages resulting from any or all claims.
The French cleat, the wall piece is shown upside down. It would need to be screwed in the wall, and the screw holes are shown going into the slot side of the cleat. The way they are shown here there's no way to attach to the wall. Am I missing something? Great video though. Very helpful.
Thank you so much for the awesome videos! Can the first method, marmox washers and D-rings, be used on a Ceramic Tile Substrate? Do you just mosaic over the marmox washer and bolt, with no problem?
What if I have a finished mosaic that I forgot to put a hanger on my piece and now it’s finished and I want to hang it?
Thank you! I have done it before but had forgotten, and I ordered a bunch of the Wedi hangers in bulk, and they came with no instructions. Yours are perfect.
I have wanted to make mosaics on a ceramic plate and an oval silver tray. I had to give these up when I couldn't come up with a safe way to hang them. I feared the weight of the plate or tray, when added to the tesserae, would be too much strain on any kind of adhesive backed hook. I thought about buying a plate-hangar but they come in limited sizes. Do you have any other ideas?
In using this system, the TNut is not always flush and the mosaic tesserae lifts up just a bit to compensate. Have you encountered this? What do you suggest?
Hi Peter, just wondering if you had any hints on hanging a mosaic that I have done on the back of a normal white tile, similar to a subway tile. I have a masonary drill bit. Its only a small tile.. 17cm long by 10cm wide. so should I use a D hanger? any help would be appreciated..
How would i attach an address number to a wall outside on tile backer board? ( wedi board ) Do i just leave holes for screws to go directly through or can i add something to the back
Can I use T nuts on concrete sheet?
I forgot to add in my question that the house is over 70 years old and concrete. So hanging something outside will be being adhered to concrete in some way.After watching your mesh tutorial I started wondering if using mesh could be an option but I will still be in the same position about how to hang or whether I just adhere the mesh and grout it to the concrete. ??
WOW! Thank You! This video is quite extensive! Have to watch again several times.
Thank you again, Peter, for another great and informative video.
thank you! very informative.
Thanks!
Hi this is all so helpful. I have begun to create outdoor wall pieces for people and I have had a request to not use wire and to make it so they can screw the boards right into their walls so that the pieces aren't taken (life in a city). I wonder how I can use the washer/screw method into wedi board but then instead of d rings use something that rises above the piece allowing the recipient to screw it into their external wall? I have had a lot of house number requests and want to do this right! Thanks in advance
Thank you for the video so much information. Can you tell me where you source your marmox washers from. I live in country SA and am having trouble finding them. Thanks alot.
Hi! Thank you so much for your video. Which system will you recommend for a very large piece,made out of parts of about 1,20 m x 1m ? It will go outdoors and I am thinking of making a metal frame for it.
Hi! You explain it very well question I did understand that the hanging goes before the mosaic I am right ?? Thanks
Hi Peter, thank you for another great tutorial. I am in a bit of a quandary about how to hang an exterior home address - 1. for the inside porch and 2. another for the letterbox. I thought the attachment would be quite simple, just drilling the cement sheeting mosaic into the concrete wall in the porch and the cement post at the letterbox. I can't even obtain a substrate as the local hardware shop has told me that the only options for exterior can not be cut at the store and Bunnings here also said that the won't cut.Both stores have cement sheeting but say it can't be cut into measurants as it shatters. So I am now in the position of not knowing what substrate and also how to hang it. Have you any ideas on options?
Hi, I’m a newbie and I’m enjoying all your videos. I have a question, you said you always seal your board before putting the mosaic pieces, what do you use to seal it?